|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
September 27th, 2009, 16:17
|
#1 | ||
|
A minor, using dad's ID
|
Well VSR-10 Barrel
Hey guys, just wondering what barrel i should get?
Im going full PDI bore up, but the TM barrel lengths are different than the Well. And I've heard a silencer adapter doesnt work, any ideas?
__________________
Quote:
Quote:
|
||
|
|
|
September 27th, 2009, 16:40
|
#2 |
|
If you're going bore-up go above 550mm otherwise all that additional air will be lost.
|
|
|
|
|
September 27th, 2009, 18:53
|
#3 | ||
|
A minor, using dad's ID
|
Yes, the Well Barrel is 510mm, so im thinking i will try to add my silencer to it. Has anyone heard if the PDI adapters work? Last i heard was that they didn't;might have to do a home made adapter.
__________________
Quote:
Quote:
|
||
|
|
|
|
September 27th, 2009, 20:57
|
#4 |
|
the King Arms adapter does work.. (threads properly). However, you will have to remove the last 3 or 4 threads in order for it to fit flush.
And you probably want to wrap the threads with electrical tape for tight fit. |
|
|
|
|
September 27th, 2009, 21:17
|
#5 | ||
|
A minor, using dad's ID
|
But i could also just get the 430mm, which is cheaper, and 80mm isn't That much to sacrifice.
__________________
Quote:
Quote:
|
||
|
|
|
|
September 27th, 2009, 21:18
|
#6 |
|
ya thats a good idea, just get the 430mm. Much less headache.
|
|
|
|
|
|
September 27th, 2009, 21:19
|
#7 | ||
|
A minor, using dad's ID
|
Then again, i want the most accuracy i can get. Oh the joy of upgrading
__________________
Quote:
Quote:
|
||
|
|
|
|
September 27th, 2009, 21:21
|
#8 |
|
i'm running a 430mm 6.01 in mine... very accurate!
__________________
 member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry |
|
|
|
|
September 27th, 2009, 21:22
|
#9 | ||
|
A minor, using dad's ID
|
Alright, 430mm it is!
__________________
Quote:
Quote:
|
||
|
|
|
|
September 27th, 2009, 21:55
|
#10 |
|
|
Don't get bore-up for 430, stick to standard bore.
|
|
|
|
|
September 27th, 2009, 23:16
|
#11 | ||
|
A minor, using dad's ID
|
So a Bore up setup, with normal TightBore?
__________________
Quote:
Quote:
|
||
|
|
|
|
September 27th, 2009, 23:22
|
#12 |
|
|
so you are going for 510mm outerbarrel + 430mm inner barrel?
|
|
|
|
|
September 27th, 2009, 23:39
|
#13 | |
|
|
Quote:
Bore-up is used when the stock cylinder can't push out enough air to make use of the extra length in a barrel... after 550mm, you'll see a slow decline in performance as the barrel gets longer and longer... This is where bore-up comes in. |
|
|
|
|
|
September 27th, 2009, 23:49
|
#14 | ||
|
A minor, using dad's ID
|
Oh ok. So ill get full PDI bore up internals, and a 6.01 PDI tightbore, in 430mm length. Thanks for the help guys!
__________________
Quote:
Quote:
|
||
|
|
|
|
September 27th, 2009, 23:59
|
#15 | ||
|
Quote:
no offence, but are you even reading what Amos is telling you?
__________________
Quote:
Chinese proverb
Last edited by theguy; September 28th, 2009 at 00:16.. |
||
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
