New problem, haven't come across this before..

[narajms]

So I'm currently using a TM VSR 10 G-Spec at 1.5 Joules, and after modding it to 1.5 (previously 0.8) now when I pull the spring (bolt) a bullet falls out of the barrel before i get a chance to shoot. Any suggestions?

[zone 69]

Take a look at your hopup rubber it may just need an ajustment.

[Fiya]

I've heard of something like this with some AEG's. I've read that they just had to turn the hop-up slightly to alleviate the problem. I'm not sure if that would fix it, but its worth a try.

[pusangani]

Originally Posted by Fiya

I've heard of something like this with some AEG's. I've read that they just had to turn the hop-up slightly to alleviate the problem. I'm not sure if that would fix it, but its worth a try.

had that happen in an aeg whose rubber wasnt sitting properly as well.

[coach]

Originally Posted by narajms

So I'm currently using a TM VSR 10 G-Spec at 1.5 Joules, and after modding it to 1.5 (previously 0.8) now when I pull the spring (bolt) a bullet falls out of the barrel before i get a chance to shoot. Any suggestions?

well that's your problem right there! bullets don't work too well with airsoft.

but ya. probably your hopup