VSR-10 Marui Clone Not Working

blackhawkdown1231 · December 29th, 2008, 17:20

Hi Anyone,

My brand new VSR-10 just arrived, I opened it up put it together and loaded the PLASTIC magazine. I cocked the bolt back all that was nessecary but when I pulled the trigger...nothing happened.

I made sure that I put everything right (I hope) and tried again and again and again but it never fired, I then cocked it more roughly, it worked for the first 5 shots but then went back to not firing. :banghead:

I have no idea whats wrong but if ANYONE has ANY idea's please reply on this thread.

P.S I ordered it from Airsoft Canada and the gun came 15 minutes ago.

Please try to help,
blackhawkdown1231

sushicake · December 29th, 2008, 17:29

Quote:

Originally Posted by blackhawkdown1231

Hi Anyone,

My brand new VSR-10 just arrived, I opened it up put it together and loaded the PLASTIC magazine. I cocked the bolt back all that was nessecary but when I pulled the trigger...nothing happened.

I made sure that I put everything right (I hope) and tried again and again and again but it never fired, I then cocked it more roughly, it worked for the first 5 shots but then went back to not firing. :banghead:

I have no idea whats wrong but if ANYONE has ANY idea's please reply on this thread.

P.S I ordered it from Airsoft Canada and the gun came 15 minutes ago.

Please try to help,
blackhawkdown1231

The bolt needs to be pushed all the way in and put back in it's original position, or the trigger wont work. Sometimes the bolt gets caught on a stray bb and wont go all the way in, so you gotta sometimes use some force. If not that then you probably got a lemon.

White_knight · December 29th, 2008, 17:33

with the bolt. once its pulled back, do you have to push the bolt back in or is it pulling the bolt back in.

blackhawkdown1231 · December 29th, 2008, 20:57

Thanks for the advice I tried that, it turned out that, that was one of the two problems. The other problem was that the magazine was not tight enough to go into the chamber and that was because the bottom rail was taking too much space for the screw to go in all the way.

I don't even have a bipod or anything so I don't even need the bottom rail!

Thanks for the advice,
blackhawkdown1231

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 29th, 2008, 17:20	#1
blackhawkdown1231 Trader rating Join Date: Dec 2008 Location: Planet Mars	VSR-10 Marui Clone Not Working Hi Anyone, My brand new VSR-10 just arrived, I opened it up put it together and loaded the PLASTIC magazine. I cocked the bolt back all that was nessecary but when I pulled the trigger...nothing happened. I made sure that I put everything right (I hope) and tried again and again and again but it never fired, I then cocked it more roughly, it worked for the first 5 shots but then went back to not firing. :banghead: I have no idea whats wrong but if ANYONE has ANY idea's please reply on this thread. P.S I ordered it from Airsoft Canada and the gun came 15 minutes ago. Please try to help, blackhawkdown1231

December 29th, 2008, 17:33	#3
White_knight Trader rating Join Date: Jul 2006	with the bolt. once its pulled back, do you have to push the bolt back in or is it pulling the bolt back in. __________________ Burnaby / Vancouver area Age verifier

December 29th, 2008, 20:57	#4
blackhawkdown1231 Trader rating Join Date: Dec 2008 Location: Planet Mars	Thanks for the advice I tried that, it turned out that, that was one of the two problems. The other problem was that the magazine was not tight enough to go into the chamber and that was because the bottom rail was taking too much space for the screw to go in all the way. I don't even have a bipod or anything so I don't even need the bottom rail! Thanks for the advice, blackhawkdown1231

VSR-10 Marui Clone Not Working

Doctor's Corner