|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 11th, 2008, 22:56
|
#1 |
|
Division
|
Delta peak sensitivity help.
Hello, I've got a charger with adjustable sensitivities and also some of the batteries, which have been charged using this charger seem to be not charging the battery fully. Some to 1/2 the rated capacity, and some to full. Now if I were to adjust the sensitivity, will I be able to get more amps into the battery?
Cough..Mcguyver...Cough
__________________
 Weee! |
|
|
|
August 11th, 2008, 22:58
|
#2 |
|
NiMH should be 6 to 8 mV/Cell and NiCD should be 6mV/Cell
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
August 11th, 2008, 23:03
|
#3 | |
|
+1
If some of your packs don't "fully" charge, but are warm when done, this simply means that the pack is dead... these have a lifetime you know.
__________________
Quote:
|
|
|
|
|
|
August 11th, 2008, 23:05
|
#4 |
|
Division
|
Its a new PTW 12V batt.
__________________
Weee! |
|
|
|
|
August 11th, 2008, 23:46
|
#5 |
|
You should cycle those a few times. Also, make sure you don't leave them connected to the gun for anything longer than necessary for use. I've gotten 12V batteries that were left connected to a gun for weeks, and they've read less than 1V. It took several cycles on auto-cycle to recover them, but who knows if they'll be 100% again.
I set my peak with PTW batteries to 6mV.
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
