|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 8th, 2008, 01:45
|
#1 |
|
Warning: All KSC glock owners!!!
Always cock the gun before inserting the mag. Don't insert the mag unless the gun is cocked. If you leave it uncocked then insert the mag, the valve will push up against the firing pin which is loaded down by the "hammer". This will eventually lead to breakage. It's kinda hard to explain. The best way to see this is by taking off the slide, pulling on the trigger to release the hammer and inserting a loaded mag. You will see that it does slightly move up but is loaded down by the hammer. The little loop on the back of the firing pin will eventually fracture as mine did...
The section circled in red is the fractured area...  Edit: This is my pain-in-the-ass-blood-pressure-raising G19... not a 18C... Last edited by digital_blue; August 8th, 2008 at 12:45.. |
|
|
|
|
August 8th, 2008, 02:15
|
#2 |
|
I've had KSC Glocks for years. Never had that problem.
I have heard of people fracturing that part from pulling the trigger and releasing that hammer with the slide off though.
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. |
|
|
|
|
August 8th, 2008, 02:24
|
#3 | |
|
Traveling Man
|
Quote:
+1 Only problems I've had with my KSC is after running about 40+ bags of BB's through my G23f on full auto I found the fire selector pin came loose. but thats about it.
__________________
Saskatchewan Age Verifier! Contact for more Info. 
|
|
|
|
|
|
August 8th, 2008, 02:30
|
#4 |
|
|
I've seen guys who use green gas on the G18C break the rocket valve on a couple of occasions. My G23f has to be 3 years old at least, but light use and very little full-auto. My G19 is close to 4 years old, bone stock, and still rocking. It's the only pistol I use really (which isn't alot).
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. |
|
|
|
|
August 8th, 2008, 02:34
|
#5 |
|
Owned my ksc g19 for 3 years... I had this happen once because I slapped the mag in hard and it was not cocked back before doing so...
well, I still dont cock the slide back before inserting the mag... but I am a little more carefull and just do it normally. Maybe you slapped the mag in too hard?
__________________
"I feel no emotion, just recoil." |
|
|
|
|
August 8th, 2008, 09:54
|
#6 | |
|
Quote:
|
||
|
|
|
|
August 8th, 2008, 11:43
|
#7 |
|
Red Wine & Adderall
|
Hmmm interesting, had a KSC g18, did alot of unloading and reloading of the mag while just sitting at my desk, sold her a while back and the buyer hasnt reported any issues. Its still firing pretty good actually last I heard.
__________________
 "Its only a little bit on fire" |
|
|
|
|
August 8th, 2008, 12:30
|
#8 |
|
* Age Verifier status suspended *
|
worked on over 20+ 18c's, never seen this issue before. Ive seen broken nozzles, damaged/bent nozzle springs, even incorrect assembly or wrong parts put into it. But with full auto GBBs, u never know where the next crack will form.
__________________
 Certified Sniper Clinic Instructor and Counter Sniper Sentinel Arms Customs - Specializing In Unique, One of a kind guns |
|
|
|
|
August 8th, 2008, 18:12
|
#9 |
|
I've had my G23F for almost 10 years and had no issues with the gun itself. Knocking on wood as I type though
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
