Cadpat Kit

warbird · July 3rd, 2008, 21:00

Well, I know the only Cadpat gear I have is my BDUs and knee pads, but here we go. I basically just took pieces here and there and made myself a loadout. Looks like an old CF MP helmet with some scrim I put on. Some old chest rig, I believe it's for Grease guns. It works good for G36 mags anyways. And just a belt with more ammo pouches and a butt pack. Yes, I do plan on getting actual an Cadpat loadout, eventually. This is not really a CF impression.
CADPAT1.flv - Video - Photobucket - Video and Image Hosting

Edit: my camera was dead, so I had to use a video camera.

KNIVEZS · July 3rd, 2008, 21:02

looks good on ya

super_six_four · July 3rd, 2008, 21:10

looking good man i like the helmet scrim, i made one for mine and everyone makes fun of it but i like them and its better than just the plane helmet

warbird · July 4th, 2008, 00:42

I prefer the scrim too. It also breaks up the from of the helmet quite well.

Copper Head · July 4th, 2008, 03:34

buy a boonie,
real men arn't scared of headshots.

Shirley · July 4th, 2008, 03:40

Nice. I like the helmet.

Bowers · July 4th, 2008, 03:41

Quote:

Originally Posted by Copper Head

buy a boonie,
real men arn't scared of headshots.

well that was contributing wasent it

Copper Head · July 4th, 2008, 03:43

i like to think so

warbird · July 4th, 2008, 09:31

haha... I'm not scared of headshots, just prefer the look. Although, that helmet is quite heavy so I doubt I could actually wear it for an OP.

Lakonian · July 4th, 2008, 10:43

Quote:

Originally Posted by warbird

haha... I'm not scared of headshots, just prefer the look. Although, that helmet is quite heavy so I doubt I could actually wear it for an OP.

Is it an RW Gallet, or replica?

Either way, nice kit dood. Makes me want to get a cadpat kit goin'.

IndiaSixTwo · July 4th, 2008, 14:31

That's a nice load out. I think that chest rig you have is a C-2 bra, not for grease guns. The M-3 Grease gun used a staggered column .45 cal magazine. I couldn't see it all that well but what you have looks like the chest rig that was issued to C-2 gunners in the eighties, that would fit the G-36 mags. (In case you didn't know, the FNC2A1 & 2 were a heavy barrelled, fully automatic, magazine fed section automatic weapon. It was a beefier version of the main battle rifle and had a bi-pod on the front.)

Crunchmeister · July 4th, 2008, 16:01

This is my my CADPAT loadout - Gen 1 CADPAT BDU, M4 vest in CADPAT, CADPAT drop-leg holster, CADPAT drop-leg dump pouch, issue CF helmet, CADPAT hydration backpack and my good ol' OD shemagh.

warbird · July 4th, 2008, 16:49

Kos- It's not a Gallet. Its an old one, I'm guessing from the 70s-80s maybe. No clue really. Something similar to an M1. There is an inner shell and the outer metal one. Its an MP too.

IndiaSixtwo- I'm not really sure what chest rig it is, but I believe you're right. The only reason I called it a Grease gun rig, is because I saw the same(very similay) rig for sale. It was said to be for the Grease guns.

Crunchmeister- Very nice loadout. Mine hasn't cost me much, yet. It's the vest and leg rigs that are so expensive. I love the C7. I'm planning on simply taking an M4 and paint the appropriate parts. I'd put an EOtech on it. It would basically be a painted C8.

Thanks for the comments by the way.

Crunchmeister · July 4th, 2008, 20:16

Quote:

Originally Posted by warbird

Crunchmeister- Very nice loadout. Mine hasn't cost me much, yet. It's the vest and leg rigs that are so expensive. I love the C7. I'm planning on simply taking an M4 and paint the appropriate parts. I'd put an EOtech on it. It would basically be a painted C8.

Generally, my kit wasn't horribly expensive. The vest was about $80 or so with shipping. The holster was about $40, and the drop pouch was around $60. Really, the only part that was expensive was the Gallet helmet which was about $150 or so.

I have a C8A2 in construction as well, complete with C8 metal body and an EOTech 552 replica. I'm having mechbox issues, so it's not up and running yet. But I really like my CA M15 / C7A1. I like the rifleman position, and with its tightbore barrel, this gun can reach out and touch people a fair distance away with a whopping 21 bb/s rate of fire. It's a great gun and I love it. I keep the Elcan sight on that one because I like the range. For shorter ranges, I prefer the EOTech or iron sights.

Once I get my C8 running, I'll be sending off my CA receiver to have the Diemaco / CF markings professionally engraved and have a proper C7A1. I don't know, but the C7A1 look just doesn't appeal to me really.

super_six_four · July 4th, 2008, 21:00

Quote:

Originally Posted by Copper Head

buy a boonie,
real men arn't scared of headshots.

im not scared of headshots i just like my full CF kit, hot days i have to use the Boonie anyway

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 3rd, 2008, 21:00	#1
warbird Trader rating Join Date: Oct 2006 Location: NB, Canada	Cadpat Kit Well, I know the only Cadpat gear I have is my BDUs and knee pads, but here we go. I basically just took pieces here and there and made myself a loadout. Looks like an old CF MP helmet with some scrim I put on. Some old chest rig, I believe it's for Grease guns. It works good for G36 mags anyways. And just a belt with more ammo pouches and a butt pack. Yes, I do plan on getting actual an Cadpat loadout, eventually. This is not really a CF impression. CADPAT1.flv - Video - Photobucket - Video and Image Hosting Edit: my camera was dead, so I had to use a video camera.

July 4th, 2008, 03:34	#5
Copper Head Trader rating Join Date: Oct 2006 Location: Ontario	buy a boonie, real men arn't scared of headshots. __________________ Sex

July 4th, 2008, 03:40	#6
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	Nice. I like the helmet. __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

July 3rd, 2008, 21:10	#3
super_six_four Trader rating Join Date: Sep 2007 Location: Calgary, Alberta	looking good man i like the helmet scrim, i made one for mine and everyone makes fun of it but i like them and its better than just the plane helmet

July 4th, 2008, 00:42	#4
warbird Trader rating Join Date: Oct 2006 Location: NB, Canada	I prefer the scrim too. It also breaks up the from of the helmet quite well.

July 4th, 2008, 03:43	#8
Copper Head Trader rating Join Date: Oct 2006 Location: Ontario	i like to think so __________________ Sex

July 4th, 2008, 09:31	#9
warbird Trader rating Join Date: Oct 2006 Location: NB, Canada	haha... I'm not scared of headshots, just prefer the look. Although, that helmet is quite heavy so I doubt I could actually wear it for an OP.

July 4th, 2008, 14:31	#11
IndiaSixTwo Trader rating Join Date: May 2006 Location: Winnipeg MB	That's a nice load out. I think that chest rig you have is a C-2 bra, not for grease guns. The M-3 Grease gun used a staggered column .45 cal magazine. I couldn't see it all that well but what you have looks like the chest rig that was issued to C-2 gunners in the eighties, that would fit the G-36 mags. (In case you didn't know, the FNC2A1 & 2 were a heavy barrelled, fully automatic, magazine fed section automatic weapon. It was a beefier version of the main battle rifle and had a bi-pod on the front.)

July 4th, 2008, 16:01	#12
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	This is my my CADPAT loadout - Gen 1 CADPAT BDU, M4 vest in CADPAT, CADPAT drop-leg holster, CADPAT drop-leg dump pouch, issue CF helmet, CADPAT hydration backpack and my good ol' OD shemagh. __________________ Last edited by Crunchmeister; July 4th, 2008 at 16:03..

July 4th, 2008, 16:49	#13
warbird Trader rating Join Date: Oct 2006 Location: NB, Canada	Kos- It's not a Gallet. Its an old one, I'm guessing from the 70s-80s maybe. No clue really. Something similar to an M1. There is an inner shell and the outer metal one. Its an MP too. IndiaSixtwo- I'm not really sure what chest rig it is, but I believe you're right. The only reason I called it a Grease gun rig, is because I saw the same(very similay) rig for sale. It was said to be for the Grease guns. Crunchmeister- Very nice loadout. Mine hasn't cost me much, yet. It's the vest and leg rigs that are so expensive. I love the C7. I'm planning on simply taking an M4 and paint the appropriate parts. I'd put an EOtech on it. It would basically be a painted C8. Thanks for the comments by the way.

Cadpat Kit

Canadian