KJ works G23 metal slide

aikidodave · April 15th, 2008, 16:01

I just got this from BBS.The gun wont reload after shooting, i have to rack the slide to chamber a round.The slide seem's to stick at 1 inch past the barrel.

You will most likely need more info but as of now i dont know what i can add so please ask me.
Thanks for the help.

aikidodave · April 15th, 2008, 17:41

update
It looks like its the cylinder is sticking i'm going to do a full take down and see if a spring is the problem.
If you have any idea's let me know

aikidodave · April 16th, 2008, 16:36

OK so i did the take down.KJ works g23 is real simple but for the life of me i can see whats wrong.The cylinder valve spring is fine piston cup is good so the problem is not there.
I put a recoil spring from a stock GEN3 TM G17 and it seemed to work,it was cycling good.
What i dont understand is why a stock spring for a G17 plastic slide would work on a stock metal G32
Just to add that the slide seem's to be rubbing on the outer barrel at 1 inch past the frame.
Any help would be nice

mcguyver · April 16th, 2008, 19:33

You can bring it over sometime Dave and I'll look at it for you. Gives me an excuse to get out the Dremel!!

BBS · April 16th, 2008, 19:48

yeah that "sticky slide" is the issue that i stated in the sale thread. not sure whats causing it. It shot fine for all the 100 rounds i put in thus far till i sold it. Matt491 is the original owner, ring him up; maybe he can shed some light.

aikidodave · April 17th, 2008, 04:55

Thanks Mac i dont know what i would do if i did not have you around i'll give you a call this friday

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 15th, 2008, 16:01	#1
aikidodave Classifieds Access Removed Trader rating Join Date: May 2006 Location: alberta	KJ works G23 metal slide I just got this from BBS.The gun wont reload after shooting, i have to rack the slide to chamber a round.The slide seem's to stick at 1 inch past the barrel. You will most likely need more info but as of now i dont know what i can add so please ask me. Thanks for the help. __________________ Shoot first ask questions later

April 15th, 2008, 17:41	#2
aikidodave Classifieds Access Removed Trader rating Join Date: May 2006 Location: alberta	update It looks like its the cylinder is sticking i'm going to do a full take down and see if a spring is the problem. If you have any idea's let me know __________________ Shoot first ask questions later

April 16th, 2008, 16:36	#3
aikidodave Classifieds Access Removed Trader rating Join Date: May 2006 Location: alberta	OK so i did the take down.KJ works g23 is real simple but for the life of me i can see whats wrong.The cylinder valve spring is fine piston cup is good so the problem is not there. I put a recoil spring from a stock GEN3 TM G17 and it seemed to work,it was cycling good. What i dont understand is why a stock spring for a G17 plastic slide would work on a stock metal G32 Just to add that the slide seem's to be rubbing on the outer barrel at 1 inch past the frame. Any help would be nice __________________ Shoot first ask questions later Last edited by aikidodave; April 16th, 2008 at 18:32..

April 16th, 2008, 19:33	#4
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	You can bring it over sometime Dave and I'll look at it for you. Gives me an excuse to get out the Dremel!! __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

April 16th, 2008, 19:48	#5
BBS Trader rating Join Date: Aug 2006 Location: BC, Canada	yeah that "sticky slide" is the issue that i stated in the sale thread. not sure whats causing it. It shot fine for all the 100 rounds i put in thus far till i sold it. Matt491 is the original owner, ring him up; maybe he can shed some light.

April 17th, 2008, 04:55	#6
aikidodave Classifieds Access Removed Trader rating Join Date: May 2006 Location: alberta	Thanks Mac i dont know what i would do if i did not have you around i'll give you a call this friday __________________ Shoot first ask questions later

KJ works G23 metal slide

Doctor's Corner