about TM and CA mags

[kullwarrior]

Few questions about G36 and SG 552 I couldn't find the info about it.
1) Does G36C mags (the ones with dummy bullet) work in CA 36/36K/C?
2) Is there a mod kit to transfer TM G36C to a full size or Kurz size?
3) Is there a mod kit to replace the CA36 Trademark back to Heckler& Koch?
4) I've heard about TM SG552's 30 rnd magazines, where can it be found?(perfer with dummy bullets) so far all A-A Surplus, 007 Airsoft only have the twenty round types?
Picture of SG552 with 30 rounds (Spring airsoft)picture of SG552 with 20 round mag
5) Finally is there any big problem in the past heard with CA36, CA36K, TM G36C? (That might affect during a skirmish)

FYI: Doing my homework right now...

[ProbeJax]

Originally Posted by kullwarrior

Few questions about G36 and SG 552 I couldn't find the info about it.
1) Does G36C mags (the ones with dummy bullet) work in CA 36/36K/C?
2) Is there a mod kit to transfer TM G36C to a full size or Kurz size?
3) Is there a mod kit to replace the CA36 Trademark back to Heckler& Koch?
4) I've heard about TM SG552's 30 rnd magazines, where can it be found?(perfer with dummy bullets) so far all A-A Surplus, 007 Airsoft only have the twenty round types?
Picture of SG552 with 30 rounds (Spring airsoft)picture of SG552 with 20 round mag
5) Finally is there any big problem in the past heard with CA36, CA36K, TM G36C? (That might affect during a skirmish)

FYI: Doing my homework right now...

I believe STAR and ICS make the 30 round magazines. To my knowledge, Marui only makes the 20 round variety in high and low caps. The low caps come with dummy bullets, and the high caps don't, but are still semi transparent. I don't think the STAR or ICS ones come with dummy bullets.

Edit: I believe Jing Gong also will make some of the 30 round longer magazines. And Double Eagle also makes 20 round magazines with dummy rounds in them, though i don't know if they're TM/Jing Gong compatible.

[ThunderCactus]

1. yes
2. yes
3. possibly the army code receiver but its doubtful

[The Saint]

1) Does G36C mags (the ones with dummy bullet) work in CA 36/36K/C?

Guns generally take the same magazine within the same family (G3, AK-47, M16/4, etc) and airsoft design (TM, CA, version 2 mechbox, version 3 mechbox, etc). For example, all G36s based on Tokyo Marui's design take the same magazines. A CA G36K might be longer than a TM G36C, but you should be looking at the magwell. Did the magwell look like it was changed? If it didn't, then it should be cross compatible.

2) Is there a mod kit to transfer TM G36C to a full size or Kurz size?

Yes.

3) Is there a mod kit to replace the CA36 Trademark back to Heckler& Koch?

Yes.

5) Finally is there any big problem in the past heard with CA36, CA36K, TM G36C? (That might affect during a skirmish)

Nope. G36s are very good guns by default. Different brands can have their own minor ups and downs. An excellent beginner gun.

FYI: Doing my homework right now...

Improve your research skills a bit more. Some of these questions have answers readily available.

[kullwarrior]

and does anyone know where would I find the full conversion kit making TM G36C into G36E or G36? Did more research but so far, the stores in Canada don't sell those x.x

EDIT: or where do I find the remover for the CA36?

[Kos-Mos]

1)Yes. I have a Star G36K, and I use a combinaison of CA, TM, MAG and Star magasines...

2)Yes and Yes.
Fullsize kit is made by a lot of company, namely G&P, Star, CA...
http://www.uncompany.com/pageproduct...sp?prodid=3798
http://www.uncompany.com/pageproduct...sp?prodid=3798
"K" mod is only a stock piece made by First Factory. You can have it ordered by any canadian retailer.
http://www.uncompany.com/pageproduct...sp?prodid=3846


3)Yes. Army code receiver. you can get it in "C", "K" or full size variant. Again from any canadian retailer. Don't order yourself. It WILL get seized.
http://www.uncompany.com/pageproduct...sp?prodid=7148
http://www.uncompany.com/pageproduct...sp?prodid=7147
http://www.uncompany.com/pageproduct...sp?prodid=7149

4)No idea

5)None. Get any brand, then look around for that specific brand's problems. Usually CA=bad internals, TM= cheap, good as long as it is stock, Star=awesome, Echo1/JG=cheaper than TM, same thing otherwise...

[Omi-san]

Originally Posted by Kos-Mos

3)Yes. Army code receiver. you can get it in "C", "K" or full size variant. Again from any canadian retailer. Don't order yourself. It WILL get seized.
http://www.uncompany.com/pageproduct...sp?prodid=7148
http://www.uncompany.com/pageproduct...sp?prodid=7147
http://www.uncompany.com/pageproduct...sp?prodid=7149

Anyone knows if the finish match the CA or the TM/JG's plastic?

[diamond_SEA]

SG552 mags with fake rounds are hard to find, and yes those are the only sites i have been able to find also. Mags without the rounds are easier to locate, cheaper, and border friendly but way less cool

[kullwarrior]

I found a site in US that sells it but I doubt it will get pass, is there anyway to convince a person who can import those to import for me? Same goes with G36, found people selling TM G36 fully converted.

[kalnaren]

1) Does G36C mags (the ones with dummy bullet) work in CA 36/36K/C?

Yup. All main G36 mags are compatible.

2) Is there a mod kit to transfer TM G36C to a full size or Kurz size?

Yup, but it would probably be cheaper just to buy a CAG36K. You'd have to price it out.

3) Is there a mod kit to replace the CA36 Trademark back to Heckler& Koch?

There are indeed several.

4) I've heard about TM SG552's 30 rnd magazines, where can it be found?(perfer with dummy bullets) so far all A-A Surplus, 007 Airsoft only have the twenty round types?
Picture of SG552 with 30 rounds (Spring airsoft)picture of SG552 with 20 round mag

Check WGC and Redwolf. As long as the mag doesn't have fake bullets, you cna import them without issue.

5) Finally is there any big problem in the past heard with CA36, CA36K, TM G36C? (That might affect during a skirmish)

Some people don't like CA guns. I have a CA36 and I love the thing, very few issues with it. Very solid, night weight, good stock performance.

[kullwarrior]

thanks for the informations, think that will do.

[Brit ter]

Double eagle mags don,t fit

[kullwarrior]

Just a question I just remembered:
Does G36 mags work on SIG 55X series? (550 sniper, 551, 552 etc)
I remember from somewhere saying that Real bullet firearm G36 30 round mag and SIG 552 are using the same type so I was wondering if it applies. Is there anyone with both TM SG552 and TM/CA G36 C/K/regular and willing to see if it works?

[Amos]

No. G36 and 552 airsoft mags are completely different.