A&K (Echo-1) 249 Mk2 SAW - Local Thoughts/Opinions?

Savage Haggis · January 4th, 2008, 02:46

A&K (Echo-1) 249 Mk2 SAW - Opinions?

In keeping with my Canadian load out I've decided to go forth & pick up my very own SAW in the near future. (I have a forth Elcan sitting in my lock up & nothing to put it on, so why not a 249?)

I've done some reading on the other variations, CA, TOP, STAR, etc, & have decided on A&K. Why A&K? Well, since I have nothing but praise for my current AEGs, being exclusively Jing Gong, & both of which have stood up to my rigors & abuse of gaming, I've decided to keep it in the family. I figure that any aeg that shoots a consistant 380/390 fps out of the box why not stay with it? I have no complaints with them at all.

Has anyone, locally, had any dealing with the A&K 249? (Based of the CA 249, with improved bushing & shimming, reported to fire 360/380 fps out the box.)

Thoughts, opinions?

Cpl T. Syndrome · January 4th, 2008, 12:34

Quote:

Originally Posted by Savage Haggis

A&K (Echo-1) 249 Mk2 SAW - Opinions?

In keeping with my Canadian load out I've decided to go forth & pick up my very own SAW in the near future. (I have a forth Elcan sitting in my lock up & nothing to put it on, so why not a 249?)

I've done some reading on the other variations, CA, TOP, STAR, etc, & have decided on A&K. Why A&K? Well, since I have nothing but praise for my current AEGs, being exclusively Jing Gong, & both of which have stood up to my rigors & abuse of gaming, I've decided to keep it in the family. I figure that any aeg that shoots a consistant 380/390 fps out of the box why not stay with it? I have no complaints with them at all.

Has anyone, locally, had any dealing with the A&K 249? (Based of the CA 249, with improved bushing & shimming, reported to fire 360/380 fps out the box.)

Thoughts, opinions?

+1..I am also lookin to get an A&K 249 Para couldn't find any real feedback about it. Thanks for startin this thread Haggis will be watchin it closely

trevor · January 4th, 2008, 12:49

http://www.arniesairsoft.co.uk/forum...owtopic=126293

The Saint · January 4th, 2008, 13:42

Both A&A and 007, but A&A has way more.

ChiefInTrees · January 4th, 2008, 13:51

I'll email for price, but do you know what they are going for?

BIGMEDCIN · January 4th, 2008, 14:01

Quote:

Originally Posted by ChiefInTrees

I'll email for price, but do you know what they are going for?

A@A has them for $850(+taxs and shipping so close to $1000)

six4 · January 4th, 2008, 14:26

Quote:

Originally Posted by Savage Haggis

A&K (Echo-1) 249 Mk2 SAW - Opinions?

In keeping with my Canadian load out I've decided to go forth & pick up my very own SAW in the near future. (I have a forth Elcan sitting in my lock up & nothing to put it on, so why not a 249?)

I've done some reading on the other variations, CA, TOP, STAR, etc, & have decided on A&K. Why A&K? Well, since I have nothing but praise for my current AEGs, being exclusively Jing Gong, & both of which have stood up to my rigors & abuse of gaming, I've decided to keep it in the family. I figure that any aeg that shoots a consistant 380/390 fps out of the box why not stay with it? I have no complaints with them at all.

Has anyone, locally, had any dealing with the A&K 249? (Based of the CA 249, with improved bushing & shimming, reported to fire 360/380 fps out the box.)

Thoughts, opinions?

only player i know of who has saw experience is ibby. give him a pm see what he knows.

m249 para before

m249 para after

Arthraxis · January 4th, 2008, 15:01

Mark at A&A told me he had a few for 799 a while ago.

artikmonkey · January 5th, 2008, 19:38

Quote:

Originally Posted by BIGMEDCIN

A@A has them for $850(+taxs and shipping so close to $1000)

the 850 includes 5% tax

Fidget11 · January 5th, 2008, 20:06

007 has quoted me 800 all in for one a couple weeks back, recommend check there as well

ThunderCactus · January 5th, 2008, 20:22

I held one and it disgusted me, it's lighter than a CA249, and upon touching it the metal actually feels as crappy as it is lol
The internals are the same as CA249, so making it into a high performance LMG is no problem, but all the weakness problems of both the STAR and CA249s are going to show up, the front sight will be weak, the cocking handle may break, cant use the carrying handle and the bipod is going to break. I believe someone who owns one already broke their bipod...
Anyway if it's all you can afford and you take good care of your guns in the field, it should be fine for you. If your more rough and tough with a deep wallet, I've tripped on barbed wire while running and landed with all my bodyweight on my G&P 249 with the box mag in it, and the box mag didn't even break. Not to mention once you shim the gears it's got really durable stock internals.

Cpl T. Syndrome · January 6th, 2008, 03:23

Well I went ahead and purchased the last one A&A has..$911.61 with shippin and taxes..Wasn't the para settled for the 249 MK2..will let you know

Bob the Angry Potato · January 6th, 2008, 04:08

Played with one at a store in HK.
They cost less then $100 Canadian in Hong Kong street price- the one I toyed around with was $750 HKD (about the best exchange rate you can get is 7.83 to 1). It was fairly light but it shot hard and fairly accurately, and was generally fairly well made for the price. Still, I haven't played with very many Airsoft M249s, so I couldn't say.

medhatboy · January 6th, 2008, 11:56

Quote:

Originally Posted by Cpl T. Syndrome

Well I went ahead and purchased the last one A&A has..$911.61 with shippin and taxes..Wasn't the para settled for the 249 MK2..will let you know

I got the MK2 also, just becareful, I broke the bipod mount 5 minutes after I got it out of the box, and don't believe the insturctions, you can't fit a large battery in, the 8.4 3600 pack I have is too wide to even go into the butt. And when the box mag is set to sound activated, it can't keep up, I was told by one of our team gun doctors to re-wire it to a 9v instead of the 2 AA it takes.

No_Way · January 6th, 2008, 12:12

On a retailer site (don'T remember) they said the A&K model got problem with the box mag and ship them with a M16 Hi-cap with/or the box mag for now. When the new lot of box mag be ready they will send them out to buyers....

You can't have the quality without paying the price !

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 4th, 2008, 13:42	#4
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Both A&A and 007, but A&A has way more. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

January 4th, 2008, 13:51	#5
ChiefInTrees Trader rating Join Date: Dec 2007	I'll email for price, but do you know what they are going for? __________________ There are no such things as dead bodies. There are only zombies who are too afraid of Bruce Campbell to get up.

January 5th, 2008, 20:06	#10
Fidget11 Trader rating Join Date: Apr 2006 Location: Edmonton, Alberta.	007 has quoted me 800 all in for one a couple weeks back, recommend check there as well __________________ Stop Sulking About It! - Prioritize & Organize! - Canadian Airsoft Is Not A Crime! Primary: G36K Secondary: FMU SIG P226

January 4th, 2008, 12:49	#3
trevor Trader rating Join Date: May 2006 Location: Red Deer	http://www.arniesairsoft.co.uk/forum...owtopic=126293

January 4th, 2008, 15:01	#8
Arthraxis Schwag wannabe Trader rating Join Date: Jul 2006 Location: Toronto, Ontario	Mark at A&A told me he had a few for 799 a while ago.

January 5th, 2008, 20:22	#11
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	I held one and it disgusted me, it's lighter than a CA249, and upon touching it the metal actually feels as crappy as it is lol The internals are the same as CA249, so making it into a high performance LMG is no problem, but all the weakness problems of both the STAR and CA249s are going to show up, the front sight will be weak, the cocking handle may break, cant use the carrying handle and the bipod is going to break. I believe someone who owns one already broke their bipod... Anyway if it's all you can afford and you take good care of your guns in the field, it should be fine for you. If your more rough and tough with a deep wallet, I've tripped on barbed wire while running and landed with all my bodyweight on my G&P 249 with the box mag in it, and the box mag didn't even break. Not to mention once you shim the gears it's got really durable stock internals.

January 6th, 2008, 03:23	#12
Cpl T. Syndrome Trader rating Join Date: Apr 2007 Location: Ottawa,On	Well I went ahead and purchased the last one A&A has..$911.61 with shippin and taxes..Wasn't the para settled for the 249 MK2..will let you know

January 6th, 2008, 04:08	#13
Bob the Angry Potato *AV Status Suspended pending trade resolution* Trader rating Join Date: Jul 2005 Location: A pile of empty boxes and broken dreams.	Played with one at a store in HK. They cost less then $100 Canadian in Hong Kong street price- the one I toyed around with was $750 HKD (about the best exchange rate you can get is 7.83 to 1). It was fairly light but it shot hard and fairly accurately, and was generally fairly well made for the price. Still, I haven't played with very many Airsoft M249s, so I couldn't say. __________________ Age verifier- Halifax region

A&K (Echo-1) 249 Mk2 SAW - Local Thoughts/Opinions?

Airsoft Guns Discussion