TM 357 not loading gas

Jimski · September 27th, 2007, 18:27

Heya all,

last time I emptied it, my 357 was shooting perfectly.
now when I try to add gas in the tank, it just goes pchh and freezes the gun's grip.
when I remove the gas bottle, it still goes pchhh for a while, and nothing happens when I press the trigger

any idea what is wrong?

thanks a lot!

The Saint · September 27th, 2007, 18:35

If the venting is coming from the gas probe, it's probably that the seal around the gas intake probe has dried out or the probe itself isn't screwed in securely.

Jimski · September 27th, 2007, 18:38

ok THX I'll check that out.

markedman · September 28th, 2007, 09:34

The gas resevoir has an O-ring between the main part of the tank and the end cap (where the fill nozzle is) You can do 2 things but it involves a little dissasembly, either try and tighten the cap to the tank a bit (Righty Tighty - Lefty Loosey) or you can take it apart and find a silicon oring to replace the original dried out one

Jimski · September 28th, 2007, 10:16

okay so apparently, it's leaking from the gas probe (the gas-loading thingy?) after the tank has been filled: the gun shoots properly but all the gas escapes at the bottom of the grip.
I've taken the whole thing apart and tonight I'll check the parts at the bottom of the gas tank.

thanks for your help!

Murdoch · September 28th, 2007, 13:29

I just had that problem with my Colt Anaconda. The oring was looking very dry, so until I find a replacement I used a thin strip of plumbers teflon tape around the threads. Not too much because they're very fine threads, but it work well...

Jimski · September 28th, 2007, 14:38

ok thx!

Jimski · October 2nd, 2007, 11:13

OK so apparently the O-ring at the Fill nozzle-end of the tank (bottom of the grip) looks dry and damaged, I will take care of that the way you explained.

Now I noticed two things:

1. the green gas bottle I use :

has a valve problem and ends up spraying most of its content on the pistol's grip.
Could it be cause for the O-ring's troubles in the first place?

2.When I try to fill the tank, gas leaks out, but I can't be sure if it's leaking from the O-ring or from the valve (tiny filling tube + valve cylinder and stuff inside)
Does it ever happen that these parts break ?

.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 27th, 2007, 18:27	#1
Jimski Trader rating Join Date: Jun 2005 Location: Montreal	TM 357 not loading gas Heya all, last time I emptied it, my 357 was shooting perfectly. now when I try to add gas in the tank, it just goes pchh and freezes the gun's grip. when I remove the gas bottle, it still goes pchhh for a while, and nothing happens when I press the trigger any idea what is wrong? thanks a lot! __________________

September 27th, 2007, 18:35	#2
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	If the venting is coming from the gas probe, it's probably that the seal around the gas intake probe has dried out or the probe itself isn't screwed in securely. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

September 27th, 2007, 18:38	#3
Jimski Trader rating Join Date: Jun 2005 Location: Montreal	ok THX I'll check that out. __________________

September 28th, 2007, 09:34	#4
markedman Trader rating Join Date: Jun 2004 Location: Calgary Alberta	The gas resevoir has an O-ring between the main part of the tank and the end cap (where the fill nozzle is) You can do 2 things but it involves a little dissasembly, either try and tighten the cap to the tank a bit (Righty Tighty - Lefty Loosey) or you can take it apart and find a silicon oring to replace the original dried out one

September 28th, 2007, 10:16	#5
Jimski Trader rating Join Date: Jun 2005 Location: Montreal	okay so apparently, it's leaking from the gas probe (the gas-loading thingy?) after the tank has been filled: the gun shoots properly but all the gas escapes at the bottom of the grip. I've taken the whole thing apart and tonight I'll check the parts at the bottom of the gas tank. thanks for your help! __________________

September 28th, 2007, 13:29	#6
Murdoch Trader rating Join Date: May 2006 Location: Scarborough, Ont.	I just had that problem with my Colt Anaconda. The oring was looking very dry, so until I find a replacement I used a thin strip of plumbers teflon tape around the threads. Not too much because they're very fine threads, but it work well...

September 28th, 2007, 14:38	#7
Jimski Trader rating Join Date: Jun 2005 Location: Montreal	ok thx! __________________ Last edited by Jimski; October 2nd, 2007 at 11:13..

October 2nd, 2007, 11:13	#8
Jimski Trader rating Join Date: Jun 2005 Location: Montreal	OK so apparently the O-ring at the Fill nozzle-end of the tank (bottom of the grip) looks dry and damaged, I will take care of that the way you explained. Now I noticed two things: 1. the green gas bottle I use : has a valve problem and ends up spraying most of its content on the pistol's grip. Could it be cause for the O-ring's troubles in the first place? 2.When I try to fill the tank, gas leaks out, but I can't be sure if it's leaking from the O-ring or from the valve (tiny filling tube + valve cylinder and stuff inside) Does it ever happen that these parts break ? . __________________

TM 357 not loading gas

Doctor's Corner