metal bodies for m4

[pwor]

what manufacturer makes the best quality and durable metal bodies for the m4/m16.

[Lakonian]

HurricanE. Seriously. Talk to Jugglez, and he will guide you! Or just go to his site! www.airsoftparts.ca

(I'd stay away from guarder)

[ThunderCactus]

VLTOR
my friend is getting this upper reciever, we'll let you know how much modding it requires when it comes in lol

[Lakonian]

Originally Posted by ThunderCactus

VLTOR
my friend is getting this upper reciever, we'll let you know how much modding it requires when it comes in lol

Real-steel would fit? Let me know when you get it done!

[Polo609]

Originally Posted by kos

Real-steel would fit? Let me know when you get it done!

+1

[rat]

my hurricane is rock solid. i have been very pleased with it.

[Jayhad]

Originally Posted by ThunderCactus

VLTOR
my friend is getting this upper reciever, we'll let you know how much modding it requires when it comes in lol

I would think 2-3 hours worth on a mill which equals $250+
which in my books equals STUPID, $250 for real steal upper reciever $250 for machine work, for a piece that won't even fit an airsoft lower reciever very well..... why waste the cash?

[Lakonian]

Originally Posted by Jayhad

I would think 2-3 hours worth on a mill which equals $250+
which in my books equals STUPID, $250 for real steal upper reciever $250 for machine work, for a piece that won't even fit an airsoft lower reciever very well..... why waste the cash?

My thoughts exactly. If you can get a HurricanE receiver which is made (cncd/casted) with almost the exact same metals, then why bother? It's kinda dumb to spend Mucho $$ on RS parts for non-RS guns. Just my opinion though.

[ThunderCactus]

Originally Posted by Jayhad

I would think 2-3 hours worth on a mill which equals $250+
which in my books equals STUPID, $250 for real steal upper reciever $250 for machine work, for a piece that won't even fit an airsoft lower reciever very well..... why waste the cash?

because team members get free labor from other teammates and i do my own machining.

[Dirty Deeds]

Are you sure he was not referring to this VLTOR body sold for airsoft?

[ThunderCactus]

absolutely not, hes getting the real steel reciever

[Eddie]

Originally Posted by ThunderCactus

because team members get free labor from other teammates and i do my own machining.

Instead of spending $300 and the time it takes to mill it to work without knowing if it will even work. Find the cheapest/used upper and mod it, then you may know if it will even work.

-Total removal of the rear pin area is necessary because there in no tabs on a real upper. Taking all the steel off that area will mean no tabs to hold the upper down.

It make work but unless you know you could be destroying a very nice piece of hardware.

[Raysaaark]

Well, I am the proud new owner of a Blackwater G&P body. It is really nice, and has done its job. And look at all the different trades you can get with them. Also, the DTP ones I hear are pretty sturdy.

[ThunderCactus]

Originally Posted by Eddie

Instead of spending $300 and the time it takes to mill it to work without knowing if it will even work. Find the cheapest/used upper and mod it, then you may know if it will even work.

-Total removal of the rear pin area is necessary because there in no tabs on a real upper. Taking all the steel off that area will mean no tabs to hold the upper down.

It make work but unless you know you could be destroying a very nice piece of hardware.

well its a good thing im not buying it then eh? dont worry, i can make it work.
Hes not sure if mark from aasurplus can import yet, but modofication isnt a problem.

[Eddie]

Well good luck, the MUR is hot but not as hot as the VIS.