Slings

freddyclaw · November 18th, 2006, 22:58

First of all I need a sling for a G3 Sg1 tokyo Marui brand. I want something that will be nice for the gun not weakening the barrle/stock. either want 2 or 3 point. I have some wobble on the stock because I set it down and friend accidently stepped on it(any help on thsi would be nice too). I am looking for reccomendations based on having used one on a longer gun.
Thanks

NewType ZERO · November 19th, 2006, 00:45

you can get reinforced metal barrels online to help with the wobble.. you can pretty much replace anypart that may have been damaged..

FirstFactory G3 Type Outer Barrel
http://www.uncompany.com/pageproduct...sp?prodid=5819 = $56US

UNCompany I find is pretty good for parts. Im not saying you have to.. but you might want to..

Trader rating · November 19th, 2006, 10:07

Honestly, until you reinforce the barrel, you really don't want a sling, unless its something thats mounting right near the receiver.

freddyclaw · November 19th, 2006, 11:10

So I would have to reinforce it before I put a sling on to be sure. Or is it fine because it is metal already? (sorry I am not great at understanding some of these things) Does it make a difference if the loop is behind the sight?
Thanks again

NewType ZERO · November 19th, 2006, 12:22

theres already a sling mount at the front and on the stock of the G3 SG1.. if your front end is damaged from being stepped on.. your going to want to either carry the gun by hand or reinforce the barrel before you put a sling on it.

freddyclaw · November 19th, 2006, 12:29

the rear end is damaged sorry for confusion

NewType ZERO · November 19th, 2006, 12:55

wait... the front end is fine and the rear end is the damaged part? well then you can look online and find replacement parts.. generally fairly cheap if your just getting the stock parts. and once they are replaced.. it should help take care of your wobble problems and so on...

Can you take pictures?

freddyclaw · November 19th, 2006, 12:57

Ya it is the rear part but it is ever so slight like i can hold it by the bottom and wiggle it and it barely moves so there is nearly any point in pics I can point out were it wiggles using one from google. (going to do that now)

freddyclaw · November 19th, 2006, 13:27

This is a diagram using a image from, google pointing to where it wobbles:

NewType ZERO · November 19th, 2006, 13:29

well its up to you if you want to replace parts.. or just put a sling on..

freddyclaw · November 19th, 2006, 13:30

is there an easy fix to that wobble?

NewType ZERO · November 19th, 2006, 13:45

you can take the stock off.. remove the 2 bolts.. and there is 2 small screws the hold the stock onto the metal part that connects to the gun.. those might need tightening or it might need to be glued or something

freddyclaw · November 19th, 2006, 13:58

Ok i think I am going to do that is it going to be fairly simple? any messing with internal parts?

NewType ZERO · November 19th, 2006, 14:08

um.. you are going to have to.. or want to.. disconnect the battery wire that goes threw the stock.. but its a little connector so its easy.. and then the whole stock comes off.. no problems.. then you will have to take out the 2 screws and the front part should come off.. you know you could also look at the diagrams that come in the box.. they are very good for help..

freddyclaw · November 19th, 2006, 14:31

sounds simple enough and now to what type of sling 2 or 3 point? or will a 3 point even work on mine and what brands?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 18th, 2006, 22:58	#1
freddyclaw Trader rating Join Date: Sep 2006 Location: Outlook, SK	Slings First of all I need a sling for a G3 Sg1 tokyo Marui brand. I want something that will be nice for the gun not weakening the barrle/stock. either want 2 or 3 point. I have some wobble on the stock because I set it down and friend accidently stepped on it(any help on thsi would be nice too). I am looking for reccomendations based on having used one on a longer gun. Thanks __________________ "Life is not tried it is merely survived if you're standing outside the fire" -Garth Brooks

November 19th, 2006, 11:10	#4
freddyclaw Trader rating Join Date: Sep 2006 Location: Outlook, SK	So I would have to reinforce it before I put a sling on to be sure. Or is it fine because it is metal already? (sorry I am not great at understanding some of these things) Does it make a difference if the loop is behind the sight? Thanks again __________________ "Life is not tried it is merely survived if you're standing outside the fire" -Garth Brooks

November 19th, 2006, 12:29	#6
freddyclaw Trader rating Join Date: Sep 2006 Location: Outlook, SK	the rear end is damaged sorry for confusion __________________ "Life is not tried it is merely survived if you're standing outside the fire" -Garth Brooks

November 19th, 2006, 00:45	#2
NewType ZERO Trader rating Join Date: May 2006 Location: Belleville, Ontario	you can get reinforced metal barrels online to help with the wobble.. you can pretty much replace anypart that may have been damaged.. FirstFactory G3 Type Outer Barrel http://www.uncompany.com/pageproduct...sp?prodid=5819 = $56US UNCompany I find is pretty good for parts. Im not saying you have to.. but you might want to..

November 19th, 2006, 10:07	#3
Droc Guest Trader rating	Honestly, until you reinforce the barrel, you really don't want a sling, unless its something thats mounting right near the receiver.

November 19th, 2006, 12:22	#5
NewType ZERO Trader rating Join Date: May 2006 Location: Belleville, Ontario	theres already a sling mount at the front and on the stock of the G3 SG1.. if your front end is damaged from being stepped on.. your going to want to either carry the gun by hand or reinforce the barrel before you put a sling on it.

November 19th, 2006, 12:55	#7
NewType ZERO Trader rating Join Date: May 2006 Location: Belleville, Ontario	wait... the front end is fine and the rear end is the damaged part? well then you can look online and find replacement parts.. generally fairly cheap if your just getting the stock parts. and once they are replaced.. it should help take care of your wobble problems and so on... Can you take pictures?

November 19th, 2006, 12:57	#8
freddyclaw Trader rating Join Date: Sep 2006 Location: Outlook, SK	Ya it is the rear part but it is ever so slight like i can hold it by the bottom and wiggle it and it barely moves so there is nearly any point in pics I can point out were it wiggles using one from google. (going to do that now) __________________ "Life is not tried it is merely survived if you're standing outside the fire" -Garth Brooks Last edited by freddyclaw; November 19th, 2006 at 13:20..

November 19th, 2006, 13:27	#9
freddyclaw Trader rating Join Date: Sep 2006 Location: Outlook, SK	This is a diagram using a image from, google pointing to where it wobbles: __________________ "Life is not tried it is merely survived if you're standing outside the fire" -Garth Brooks

November 19th, 2006, 13:29	#10
NewType ZERO Trader rating Join Date: May 2006 Location: Belleville, Ontario	well its up to you if you want to replace parts.. or just put a sling on..

November 19th, 2006, 13:30	#11
freddyclaw Trader rating Join Date: Sep 2006 Location: Outlook, SK	is there an easy fix to that wobble? __________________ "Life is not tried it is merely survived if you're standing outside the fire" -Garth Brooks

November 19th, 2006, 13:45	#12
NewType ZERO Trader rating Join Date: May 2006 Location: Belleville, Ontario	you can take the stock off.. remove the 2 bolts.. and there is 2 small screws the hold the stock onto the metal part that connects to the gun.. those might need tightening or it might need to be glued or something

November 19th, 2006, 13:58	#13
freddyclaw Trader rating Join Date: Sep 2006 Location: Outlook, SK	Ok i think I am going to do that is it going to be fairly simple? any messing with internal parts? __________________ "Life is not tried it is merely survived if you're standing outside the fire" -Garth Brooks

November 19th, 2006, 14:08	#14
NewType ZERO Trader rating Join Date: May 2006 Location: Belleville, Ontario	um.. you are going to have to.. or want to.. disconnect the battery wire that goes threw the stock.. but its a little connector so its easy.. and then the whole stock comes off.. no problems.. then you will have to take out the 2 screws and the front part should come off.. you know you could also look at the diagrams that come in the box.. they are very good for help..

November 19th, 2006, 14:31	#15
freddyclaw Trader rating Join Date: Sep 2006 Location: Outlook, SK	sounds simple enough and now to what type of sling 2 or 3 point? or will a 3 point even work on mine and what brands? __________________ "Life is not tried it is merely survived if you're standing outside the fire" -Garth Brooks

Slings

Accessories Discussion