TM M16VN Dissasembly

randas · July 31st, 2006, 00:01

I cant seem to find anything searching, can someone please tell me how to completly dissasemble a TM M16VN? I cant seem to get the recever apart!

porry · July 31st, 2006, 01:24

take the 2 body pins out, and pull the top half off. Im fairly sure the vn is the same when it comes to dissassembly as the a2 and m4. Maybe im wrong, ill find out.

randas · July 31st, 2006, 01:33

I have both large body pins removed, but it still won't come apart.

Kampfer · July 31st, 2006, 15:48

No no no!!! :x: :banghead:
TM M16 VN have a different takedown than the newer TM M16A2 and M4s

They use a full mechbox so pulling the top off with out taking of the rest of the body will break your tabs!!! Then the top receiver will really fall off even when you are playing.

You'll have to take the motor plate out. ( don't lose the roung grey plate)
take out the motor (remember the wires position)
take off the grip (keep the grip upsidedown to keep the 2 screws in the grip)
take off the rubber plate from the rear stock
take off the rear stock by removing the long bolt in the stock.
take out the 3 body pins. (2 large and one tiny on in the middle, it comes out in the opposite side of the 2 large pin)
slide the lower receiver out
then pull the mechbox out from the top receiver.

TM didn't bother to re-design it like the newer models. The VN is one of TM's first AEG model so it's not take down friendly at all.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 31st, 2006, 00:01	#1
randas Trader rating Join Date: Mar 2005 Location: Winnipeg, Manitoba	TM M16VN Dissasembly I cant seem to find anything searching, can someone please tell me how to completly dissasemble a TM M16VN? I cant seem to get the recever apart! __________________

July 31st, 2006, 01:33	#3
randas Trader rating Join Date: Mar 2005 Location: Winnipeg, Manitoba	I have both large body pins removed, but it still won't come apart. __________________

July 31st, 2006, 15:48	#4
Kampfer Trader rating Join Date: Nov 2002 Location: Vancouver	No no no!!! :x: :banghead: TM M16 VN have a different takedown than the newer TM M16A2 and M4s They use a full mechbox so pulling the top off with out taking of the rest of the body will break your tabs!!! Then the top receiver will really fall off even when you are playing. You'll have to take the motor plate out. ( don't lose the roung grey plate) take out the motor (remember the wires position) take off the grip (keep the grip upsidedown to keep the 2 screws in the grip) take off the rubber plate from the rear stock take off the rear stock by removing the long bolt in the stock. take out the 3 body pins. (2 large and one tiny on in the middle, it comes out in the opposite side of the 2 large pin) slide the lower receiver out then pull the mechbox out from the top receiver. TM didn't bother to re-design it like the newer models. The VN is one of TM's first AEG model so it's not take down friendly at all. __________________ Op-for & BCAC clubs in and around Vancouver, BC www.MILSIG.ca Airsoft Source www.DSTactical.com Tactical Gears www.AirsoftGear.ca Parts, Accessories and Gaming Experience

July 31st, 2006, 01:24	#2
porry Banned Trader rating Join Date: Mar 2004 Location: outside Edmonton	take the 2 body pins out, and pull the top half off. Im fairly sure the vn is the same when it comes to dissassembly as the a2 and m4. Maybe im wrong, ill find out.

TM M16VN Dissasembly

Doctor's Corner