ICS Releases New Motor

DEA · March 1st, 2006, 04:23

Just had the latest release from ICS for their new Turbo 3000 Motor. The text was translated, so the english is not perfect, but this is the official document from ICS:

ICS NEW TURBO 3000 SUPER TORQUE MOTOR
New ICS turbo 3000 motor is on market now，high rotational speed，super torque and long efficiency，new turbo 3000 is also upgraded to avoid burning，suitable for any aftermarket upgrade kit。

Due to turbo 3000 torque is almost double of turbo 2000，torque average 3875 kg.cm，you wont feel the rotation speed decrease while using M180 spring。After several test，it could extremely satisfy your demand，its a perfect and invincible motor。

Another advantage is each ICS AEG model is install with new turbo 3000，we offer best profit for consumer and convenience for advanced player。

Below is comparison sheet about turbo 3000 and 2000 datum。

TURBO 3000 TURBO 2000
NRP Voltage 8.4V 8.4V
Output power 102W 53.82W
Free rotation speed 23300 R.P.M (8.4V) 26000 R.P.M (8.4V)
Highest torque 3875 kg.cm 2082 kg.cm

Just an FYI for you all

thorvald · March 2nd, 2006, 22:08

Now the big question is... do you have any on order? :-)

DEA · March 2nd, 2006, 22:40

Quote:

Originally Posted by thorvald

Now the big question is... do you have any on order? :-)

We actually just received our ICS order. So this one was shipped after they sent me this release, however, we for sure will bring some in on the next order. We are doing monthly orders with ICS if not sooner sometimes, so it won't be long

mcguyver · March 2nd, 2006, 22:42

Perhaps their new AK comes with it. I'll know soon enough.

thorvald · March 2nd, 2006, 23:09

Can you bring in some ICS M4 upgrade parts as well, no one seems to stock them at all in Canada (bushings, upper gearbox set, etc).

I'm sure Mcguyver can list whats good to stock.

DEA · March 2nd, 2006, 23:46

I could for sure speak to mcguyver, and get a list of upgrade parts. It should not be a problem bringing some in to stock. If there is anything specific you require however, just let us know. As I mentioned earlier, we do very frequent ICS orders.

stokes · March 3rd, 2006, 02:12

Hopup and Hopup Nub are always good to stock. Im getting some from Randy in a few weeks. So you better keep them in stock randy. Im just currently getting the money now.
I ordered one hopup unit and 3 hopup nubs. but i have a question 25 bucks is for shipping isnt that too much?

gandar · March 3rd, 2006, 02:19

That sounds like a lot, especially since it's only tiny little things.

stokes · March 3rd, 2006, 02:22

I am now debating whether to get it or not because that damn shipping price is way to high. But in the end I really need those pieces... and no one else has them.

mcguyver · March 3rd, 2006, 02:41

I bought some mags for my M700 and the freight from Toronto to Grande Prairie, AB was $23 xpresspost. You pay a flat fee if it's under 1kg I think, even if it's real small.

stokes · March 3rd, 2006, 02:42

Damn it that sucks..... just have to get more money then.... by the way MC did you get the AK that Randy promised?

mcguyver · March 3rd, 2006, 02:44

Tomorrow.

odp · March 3rd, 2006, 03:45

Quote:

Originally Posted by mcguyver

I bought some mags for my M700 and the freight from Toronto to Grande Prairie, AB was $23 xpresspost. You pay a flat fee if it's under 1kg I think, even if it's real small.

If they're small, you should get them to ship it in a pre-paid Xpresspost bubble-wrap envelope. National is around $20 IIRC and weight doesn't matter - as long as you can fit all your stuff in the envelope.

mcguyver · March 3rd, 2006, 10:29

That's how my mags came. The shipping cost was on the xpresspost label.

Gryphon · March 3rd, 2006, 11:23

Jesus. I don't know if the rates are higher elsewhere in the country, but $23 for a small XpressPost package is nothing short of highway robbery. If it were Priority Courier service which is basically next-day delivery, the price is justified. However XpressPost is supposed to be an economical express service. I usually don't pay more than $10 for a prepaid National envelope, less for a Regional. Check with your post office when shipping to determine if there's something more reasonable, often times the second fastest service is only an extra day or two and costs SIGNIFICANTLY less.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 1st, 2006, 04:23	#1
DEA Trader rating Join Date: Jan 2003 Location: Calgary	ICS Releases New Motor Just had the latest release from ICS for their new Turbo 3000 Motor. The text was translated, so the english is not perfect, but this is the official document from ICS: ICS NEW TURBO 3000 SUPER TORQUE MOTOR New ICS turbo 3000 motor is on market now，high rotational speed，super torque and long efficiency，new turbo 3000 is also upgraded to avoid burning，suitable for any aftermarket upgrade kit。 Due to turbo 3000 torque is almost double of turbo 2000，torque average 3875 kg.cm，you wont feel the rotation speed decrease while using M180 spring。After several test，it could extremely satisfy your demand，its a perfect and invincible motor。 Another advantage is each ICS AEG model is install with new turbo 3000，we offer best profit for consumer and convenience for advanced player。 Below is comparison sheet about turbo 3000 and 2000 datum。 TURBO 3000 TURBO 2000 NRP Voltage 8.4V 8.4V Output power 102W 53.82W Free rotation speed 23300 R.P.M (8.4V) 26000 R.P.M (8.4V) Highest torque 3875 kg.cm 2082 kg.cm Just an FYI for you all __________________ "Fully Retired Retailer" :salute: Double Edge Airsoft!

March 2nd, 2006, 22:42	#4
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	Perhaps their new AK comes with it. I'll know soon enough. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

March 2nd, 2006, 23:46	#6
DEA Trader rating Join Date: Jan 2003 Location: Calgary	I could for sure speak to mcguyver, and get a list of upgrade parts. It should not be a problem bringing some in to stock. If there is anything specific you require however, just let us know. As I mentioned earlier, we do very frequent ICS orders. __________________ "Fully Retired Retailer" :salute: Double Edge Airsoft!

March 2nd, 2006, 22:08	#2
thorvald Trader rating Join Date: Dec 2004	Now the big question is... do you have any on order? :-)

March 2nd, 2006, 23:09	#5
thorvald Trader rating Join Date: Dec 2004	Can you bring in some ICS M4 upgrade parts as well, no one seems to stock them at all in Canada (bushings, upper gearbox set, etc). I'm sure Mcguyver can list whats good to stock.

March 3rd, 2006, 02:12	#7
stokes Trader rating Join Date: Dec 2005 Location: Toronto	Hopup and Hopup Nub are always good to stock. Im getting some from Randy in a few weeks. So you better keep them in stock randy. Im just currently getting the money now. I ordered one hopup unit and 3 hopup nubs. but i have a question 25 bucks is for shipping isnt that too much?

March 3rd, 2006, 02:19	#8
gandar Trader rating Join Date: Oct 2004 Location: Sault Ste. Syberia, ON	That sounds like a lot, especially since it's only tiny little things. __________________ Ubique Quo Fas et Gloria Ducunt Alternatively, I could just light you on fire. - Me

March 3rd, 2006, 02:22	#9
stokes Trader rating Join Date: Dec 2005 Location: Toronto	I am now debating whether to get it or not because that damn shipping price is way to high. But in the end I really need those pieces... and no one else has them.

March 3rd, 2006, 02:41	#10
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	I bought some mags for my M700 and the freight from Toronto to Grande Prairie, AB was $23 xpresspost. You pay a flat fee if it's under 1kg I think, even if it's real small. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

March 3rd, 2006, 02:42	#11
stokes Trader rating Join Date: Dec 2005 Location: Toronto	Damn it that sucks..... just have to get more money then.... by the way MC did you get the AK that Randy promised?

March 3rd, 2006, 02:44	#12
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	Tomorrow. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

March 3rd, 2006, 10:29	#14
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	That's how my mags came. The shipping cost was on the xpresspost label. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

March 3rd, 2006, 11:23	#15
Gryphon Trader rating Join Date: Mar 2005 Location: MB	Jesus. I don't know if the rates are higher elsewhere in the country, but $23 for a small XpressPost package is nothing short of highway robbery. If it were Priority Courier service which is basically next-day delivery, the price is justified. However XpressPost is supposed to be an economical express service. I usually don't pay more than $10 for a prepaid National envelope, less for a Regional. Check with your post office when shipping to determine if there's something more reasonable, often times the second fastest service is only an extra day or two and costs SIGNIFICANTLY less.

ICS Releases New Motor

Accessories Discussion