King Arms popularity

johnyew · November 11th, 2005, 05:50

Just wondering how do you feel in general about KA products?

Is there anything you would think of getting in the next 6 months that are made by KA?

Here is their website for your perusal,

King Arms Site

Greylocks · November 11th, 2005, 08:57

Personally, even if it's quite expensive, I'm seriously thinking about a Dragunov.

Primus · November 11th, 2005, 11:04

I've been using this dump pouch (http://kingarms.com/productpage.asp?prodid=182) all summer and so far the only problem is the paint rubbing off the 3 buttons. I just might be getting some more stuff from them this winter.

Tom_Keeler · November 11th, 2005, 11:48

I will be getting a scope in from them soon, so hopefully the quality will remain good.

Wesman · November 11th, 2005, 12:03

I purchased a King Arms silencer over the summer and it's really nice, with the exception of the -14 mm threads being stripped to the point that it needs teflon tape to be secure. If I could, I'd get another -14 mm thread adapter for that particular silencer.

Sgt_Lynch · November 11th, 2005, 12:06

Quote:

Originally Posted by Greylocks

Personally, even if it's quite expensive, I'm seriously thinking about a Dragunov.

I saw one in Japan when I was there last month.... not terribly impressed. Even though it had metal everywhere, the spring system felt weak, like a TM Spaz12 or something.

Nice power... but a Dragunov Bolt Action? Meh, ruins the whole deal. They would have been better off with an AEG, or my pick: GAS.

Gryphon · November 11th, 2005, 13:30

Perhaps but spring is far more reliable and consistent, and a LOT simpler to manufacture. Their rifle accepts AEG springs so it's nothing to upgrade the power to your liking, and unlike a gas rifle you'll be able to use it in the winter without losing power.

Oh and the Dragunov is not manufactured by King Arms; they're a distributor for AtoZ Cargo who manufactures it.

Whozat · November 11th, 2005, 14:33

Purchased a couple of their 78 round 40mm grenades a while ago, not bad.

ILLusion · November 11th, 2005, 17:14

When King Arms first appeared on the scene, I wasn't too impressed with their products. But as time progressed, although the price of their products increased, so did the quality and I am now more than happy to carry and represent their products. Many of their designs are based very closely off of real steel counterparts.

Keep up the great manufacturing and design.

surebet · November 11th, 2005, 20:02

The few parts I have bought from them have yet to fail me. Good stuff.

ILLusion · November 12th, 2005, 18:01

John Yew, are you an employee of King Arms?

ColtFarmer · November 12th, 2005, 18:28

i have a KA Socom silencer. very good bang for the buck.

surebet · November 13th, 2005, 17:25

Quote:

Originally Posted by ILLusion

John Yew, are you an employee of King Arms?

Yeah, I got that PM too... :?

Dozer_01 · November 13th, 2005, 19:29

I have a few KA arms parts on the Dozalite. They are built well and do the job great. Insane good prices on their stuff. This company is BY FAR the best accessories bang for your buck.

BC_K · November 14th, 2005, 22:51

Great shit, cheap prices. Keep's me happy and going back for more.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 11th, 2005, 05:50	#1
johnyew Trader rating Join Date: Dec 2002	King Arms popularity Just wondering how do you feel in general about KA products? Is there anything you would think of getting in the next 6 months that are made by KA? Here is their website for your perusal, King Arms Site

November 11th, 2005, 11:04	#3
Primus Super Moderator Trader rating Join Date: Oct 2001 Location: Ottawa, ON	I've been using this dump pouch (http://kingarms.com/productpage.asp?prodid=182) all summer and so far the only problem is the paint rubbing off the 3 buttons. I just might be getting some more stuff from them this winter. __________________ MODT - Magnus Operator Development Team - tu fui ego eris Gray Fox Strategic - @grayfoxstrategic on Facebook / Instagram

November 11th, 2005, 11:48	#4
Tom_Keeler Trader rating Join Date: Jun 2005 Location: Charlottetown	I will be getting a scope in from them soon, so hopefully the quality will remain good. __________________ "In a sense, people are so enraged at the Liberal government, that they're giving Stephen Harper and his government a bye. They should take a look at what he proposes." - Former Progressive Conservative leader Joe Clark, April 26th 2004. Reported in the Globe and Mail. Section 8 Airsoft

November 11th, 2005, 08:57	#2
Greylocks Trader rating Join Date: Dec 2001 Location: Gatineau, Quebec (Near Ottawa)	Personally, even if it's quite expensive, I'm seriously thinking about a Dragunov.

November 11th, 2005, 12:03	#5
Wesman Trader rating Join Date: May 2003	I purchased a King Arms silencer over the summer and it's really nice, with the exception of the -14 mm threads being stripped to the point that it needs teflon tape to be secure. If I could, I'd get another -14 mm thread adapter for that particular silencer. __________________ Dude, I think they're shooting at us.

November 11th, 2005, 13:30	#7
Gryphon Trader rating Join Date: Mar 2005 Location: MB	Perhaps but spring is far more reliable and consistent, and a LOT simpler to manufacture. Their rifle accepts AEG springs so it's nothing to upgrade the power to your liking, and unlike a gas rifle you'll be able to use it in the winter without losing power. Oh and the Dragunov is not manufactured by King Arms; they're a distributor for AtoZ Cargo who manufactures it.

November 11th, 2005, 14:33	#8
Whozat Trader rating Join Date: Jan 2004 Location: New Westminster, B.C.	Purchased a couple of their 78 round 40mm grenades a while ago, not bad. __________________ Paul / Whozat BCAC

November 11th, 2005, 17:14	#9
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	When King Arms first appeared on the scene, I wasn't too impressed with their products. But as time progressed, although the price of their products increased, so did the quality and I am now more than happy to carry and represent their products. Many of their designs are based very closely off of real steel counterparts. Keep up the great manufacturing and design. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

November 11th, 2005, 20:02	#10
surebet Vicious MSPaint Wizard Trader rating Join Date: Aug 2004 Location: Longueuil, Quebec	The few parts I have bought from them have yet to fail me. Good stuff. __________________ Annoyingly good with numbers Stop American Censorship

November 12th, 2005, 18:01	#11
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	John Yew, are you an employee of King Arms? __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

November 12th, 2005, 18:28	#12
ColtFarmer Trader rating Join Date: Mar 2002	i have a KA Socom silencer. very good bang for the buck. __________________ Arts and Crimes

November 13th, 2005, 19:29	#14
Dozer_01 Trader rating Join Date: Sep 2003 Location: Ontario	I have a few KA arms parts on the Dozalite. They are built well and do the job great. Insane good prices on their stuff. This company is BY FAR the best accessories bang for your buck. __________________ LLTP

November 14th, 2005, 22:51	#15
BC_K Banned Trader rating Join Date: Mar 2004	Great shit, cheap prices. Keep's me happy and going back for more.

King Arms popularity

Accessories Discussion