Hi-Capa Gold Match Slide Stop

[Sticksquad]

Hi guys,

Any ideas how to solve the slide stop wont lock the slide after shooting full cycle of BBs ?

Before this i have no problem.. After shooting 3-4mag its happens.. This is stock hi-capa gold match

I can lock it manually without problems




Sent from my iPhone using Tapatalk

[Styrak]

Does it lock back with a mag filled with gas and no BB's, when dry firing? (perhaps it's just low on gas) Is this outside, inside? (what's the temperature)

[Sticksquad]

With no BBs inside also not locked..
Normal room temperature


Sent from my iPhone using Tapatalk

[Sticksquad]

Originally Posted by Styrak

Does it lock back with a mag filled with gas and no BB's, when dry firing? (perhaps it's just low on gas) Is this outside, inside? (what's the temperature)

Not locked eventhough without BBs...
Normal room temperature


Sent from my iPhone using Tapatalk

[BioRage]

Isn't that one of the first things to break on the hi-capas anyways?

Assume you were running propane?

[Styrak]

Hicapas can run for years or forever on propane and stock slide catches.

Nevermind that the new Gold Match design has a metal on metal catch.

[N_Force]

The little screw holding a metal piece for reinforced slide stop, tie it up or add small amount of glue to hold it in place. That could be loose and miss the catch.

Further more, after awhile you may find the slide loose a bit too. It is because this metal piece is starting to wear and off track. That also effect the trigger pull not function properly. I applied thin layer of blue glue to increase the thickness and fill the gap, now it works great. But how long can it last? Duno yet.

For sure one thing, this gold match has tie grouping out of the box! Love it and good for my Action-Air practical shooting.

Check #2-5 for more info.
http://airsoftcanada.com/showthread.php?t=173924

[Sticksquad]

Originally Posted by N_Force

The little screw holding a metal piece for reinforced slide stop, tie it up or add small amount of glue to hold it in place. That could be loose and miss the catch.

Further more, after awhile you may find the slide loose a bit too. It is because this metal piece is starting to wear and off track. That also effect the trigger pull not function properly. I applied thin layer of blue glue to increase the thickness and fill the gap, now it works great. But how long can it last? Duno yet.

For sure one thing, this gold match has tie grouping out of the box! Love it and good for my Action-Air practical shooting.

Check #2-5 for more info.
http://airsoftcanada.com/showthread.php?t=173924

Can you show me area of the blue glue you applied ?


Sent from my iPhone using Tapatalk

[N_Force]

If you've found the problems I mentioned, then you do it. Thin layer. If you have no problems, don't do it.
Remove the metal and apply thin layer glue on the wall between slide to increase the thickness of the wall for better tracking. I'll post my slide done later tonight

[Sticksquad]

Do i miss some parts or spring inside this hole? Seems nothing in there


Sent from my iPhone using Tapatalk

[Sticksquad]

Originally Posted by N_Force

If you've found the problems I mentioned, then you do it. Thin layer. I'll post my slide git it done later tonight

Alright seems some tear on that spot on my slide.. Will give it a try.. Thanks mate 👌🏻😉


Sent from my iPhone using Tapatalk

[Sticksquad]

This cylinder on the Slide Stop supposed to rolled like that or its just static? Because mine can roll..


Sent from my iPhone using Tapatalk

[Sticksquad]

[N_Force]

Can you see that thin layer of gasket maker shows between the reinforced slide stop metal piece and the plastic slide, that's the way to increase the thickness to fill the space between the track of the mid frame and slide.

[Sticksquad]

You mean this rubber gasket? U suggest me to add one more gasket?


Sent from my iPhone using Tapatalk