Airsoft Canada

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

AEG won't shoot, no noise.

:

Doctor's Corner

Reply
 
Thread Tools
Old September 23rd, 2015, 22:20   #1
Brandon_Lam
 
Join Date: Dec 2013
AEG won't shoot, no noise.

I have an ECHO 1 M14. I've had the gun for about a year and it was working fine on Sunday when I went. When I went again a few days later it started acting up a few minutes in (the gun would stall when firing in semi so I switched it to full auto to clear it and it was fine) and it repeated this process a few times. A minute later the battery fell out all the way from the end where it connects to the gearbox, I connect it again and the gun won't shoot at all now, no noise, nothing.

When I'm pulling the trigger and put my head up real close to the gear box I hear a very soft static noise by the motor for about a second every time I pull the trigger back but that is all the sound it makes, and it is very, very quiet.
I've tried 5 different batteries, not sure where to go from here.

Also, I had the gun worked on in the past, there is no longer a fuse box inside of the gun and I have been running it that way for over a year, just putting it out there in case that could be a factor.

EDIT: After pulling the trigger for a while the static sound from the motor got louder and louder until it finally shot once, then back to quiet and nothing.

Last edited by Brandon_Lam; September 23rd, 2015 at 22:37..
Brandon_Lam is offline   Reply With Quote
Old September 23rd, 2015, 22:32   #2
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
When you say the battery fell out did it fall out of the gun and tug on the wires and then get free from the plug and hit the ground?
Sounds like a lack of power either from a bad battery or a bad connection somewhere.
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft
Hectic is offline   Reply With Quote
Old September 23rd, 2015, 22:36   #3
Desmodus
Mexifaggot
 
Desmodus's Avatar
 
Join Date: Sep 2006
Location: Mississauga, Ontario
Bad trigger contacts maybe?
__________________
Guardians of Asgaard - KF25 -

Primaries: LCT AK74MN w/SKTBR, VFC M4 SOPMOD Block 2
Secondary: Latino heat, TM Glock 17
Desmodus is offline   Reply With Quote
Old September 23rd, 2015, 22:36   #4
Brandon_Lam
 
Join Date: Dec 2013
Quote:
Originally Posted by Hectic View Post
When you say the battery fell out did it fall out of the gun and tug on the wires and then get free from the plug and hit the ground?
Sounds like a lack of power either from a bad battery or a bad connection somewhere.
I meant that the wires connected to the gearbox fell out so like from the battery all the way up to the wire that connected to the gearbox.
Brandon_Lam is offline   Reply With Quote
Old September 23rd, 2015, 23:05   #5
RainyEyes
 
RainyEyes's Avatar
 
Join Date: Sep 2013
Location: Scarbororororough
Quote:
Originally Posted by Brandon_Lam View Post
I meant that the wires connected to the gearbox fell out so like from the battery all the way up to the wire that connected to the gearbox.
Be more specific.

There's a difference between an exposed wire where the wire fell out of its housing compartment, and a wire that got tugged off and disconnected from the gearbox.

Are you trying to say that the battery fell out of its housing and that tugged ALL the wires out and disconnected it from the gearbox?
RainyEyes is offline   Reply With Quote
Old September 23rd, 2015, 23:17   #6
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
going to say trigger contacts are carbonized/dirty/burned.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old September 23rd, 2015, 23:27   #7
buddahknife
 
buddahknife's Avatar
 
Join Date: Sep 2014
Location: Burlington, ON
Pictures?

Last edited by buddahknife; September 23rd, 2015 at 23:29.. Reason: ya I didnt completely read the OP's post
buddahknife is offline   Reply With Quote
Old September 24th, 2015, 00:45   #8
Brandon_Lam
 
Join Date: Dec 2013
left a battery in it and cleaned some gunk out of the outer gearbox and when i came back it was shooting but the battery was burning hot. I'm concerned about why the battery would be burning hot when it was just idling for a few hours, anyone know what's up? the gun seems to be fine now, can fire full auto and semi and everything and is very responsive. It's just that the battery was so hot as if it were overcharged when all it was doing was sitting connected to the gearbox

btw thanks, it was the trigger contacts!

Last edited by Brandon_Lam; September 24th, 2015 at 00:53..
Brandon_Lam is offline   Reply With Quote
Old September 24th, 2015, 00:46   #9
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
shorting wires.. something is pinched or making contact.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old September 24th, 2015, 01:21   #10
Brandon_Lam
 
Join Date: Dec 2013
Quote:
Originally Posted by lurkingknight View Post
shorting wires.. something is pinched or making contact.
What does that mean? Sorry for the dumb question.
Brandon_Lam is offline   Reply With Quote
Old September 24th, 2015, 04:38   #11
Zfurlong
 
Join Date: Sep 2014
Location: Oromocto
It means that there's a wire somewhere that has the protective rubber pinched and made a hole in it. Electrical tape will fix that, if you can find where it's pinched that is.
__________________
current armament:
mk43, ump.45, p90, barret, m14, g33, k98, m4 tac, m4 swat, mp5 navy, vsr10, p226, m9.
Zfurlong is offline   Reply With Quote
Old September 24th, 2015, 14:55   #12
Brandon_Lam
 
Join Date: Dec 2013
Quote:
Originally Posted by Zfurlong View Post
It means that there's a wire somewhere that has the protective rubber pinched and made a hole in it. Electrical tape will fix that, if you can find where it's pinched that is.
Thanks so much! I managed to find the damage and it seems to be at 100% right now, will try it out at the field this weekend but from testing at home everything seems fine.
Brandon_Lam is offline   Reply With Quote
Old September 24th, 2015, 17:09   #13
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
Quote:
Originally Posted by Brandon_Lam View Post
What does that mean? Sorry for the dumb question.
This means you prolly need a gun doc.
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft
Hectic is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada

All times are GMT -4. The time now is 01:28.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.