Airsoft Canada

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

RS SVD Performance Issues

:

Doctor's Corner

Reply
 
Thread Tools
Old April 1st, 2015, 18:49   #1
MrMoo
 
MrMoo's Avatar
 
Join Date: Jun 2010
Location: Trenton, ON
RS SVD Performance Issues

Hey all,

Just picked up a new-ish Real Sword SVD, and it's not performing great. I thought maybe it was just nervous, but, I lit some candles and whispered encouragement to it to no avail.

BBs are dropping off at an obscenely short range, barely hitting the 100ft mark. I've never had one of these guns before, but, considering my G&G AK will hit 200ft targets easily, it seems pretty weird. Gun seems to be cycling okay, and I've tried a couple batteries, so... What's next? I don't have a lot of experience with issues like this, so I'm not sure where to start diagnosing.

Could it need a new hop-up? I theorized that maybe air is escaping somewhere in the system, resulting in less pressure out the barrel, but, that could be made up nonsense.

Suggestions are appreciated!
MrMoo is offline   Reply With Quote
Old April 3rd, 2015, 01:02   #2
SpikedGhost
 
SpikedGhost's Avatar
 
Join Date: Apr 2009
Location: Montreal
If its new-ish you should start from the barrel going towards the gearbox. Check if the barrel is clean and not damaged. Then try playing with the hop up adjustment. Also make sure you are using good quality BBs. If all of that doesn't work then you need to disassemble the gun and start checking for broken/damaged parts. (nozzle, piston and spring come to mind)
__________________
SpikedGhost is offline   Reply With Quote
Old April 3rd, 2015, 01:19   #3
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
usually hop problem. I mean RS guns come with pretty good hop rubbers, but they can still be upgraded.
ThunderCactus is offline   Reply With Quote
Old April 3rd, 2015, 19:00   #4
MrMoo
 
MrMoo's Avatar
 
Join Date: Jun 2010
Location: Trenton, ON
Thanks guys, I'll start pulling it apart and see what I can find. I just wondered if it was a common issue with these types of guns or something, or if there was something specific I should look for.
MrMoo is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada

All times are GMT -4. The time now is 00:47.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.