Vertical grip and CA36

The Saint · September 2nd, 2005, 19:03

Hey folks, does anyone know how would one go about fitting a vertical grip onto the hand guard of a CA36? The underside of the hand guard has slots cut into it (http://i5.photobucket.com/albums/y19...r/PICT0006.jpg) (http://www.classicarmy.com/photo/282_P0fA081P%205.jpg) but I don't know if they have anything to do with adding on attachments. Would I have to dremel RIS panels into the underside in order to fit a vert grip?

FOX_111 · September 2nd, 2005, 19:24

hum.. just buy the grip, you will figure it out by yourself. It's pretty easy to attach. almost all RIS goodies attach the same way.

EDIT: Do you have the RIS rail to put on the handguard? The photo is quite dark and blury.

Plant · September 2nd, 2005, 19:31

There is no rail for the full length G36 Handguard's. Well at least they don't come with one, i'm not sure if there are aftermarket products but I know that it does not come with a rail. You could always use duct tape...

FOX_111 · September 2nd, 2005, 20:17

no duct tape.. just buy the rail and screw it on. Then the vertical grip will fit perfect on it.

You should have 2 or 4 screw holes on the grip to fit the rail.

The Saint · September 2nd, 2005, 20:19

Thanks folks, and those pics aren't mine gun, I'm just including them so people can see what the underside of a standard CA36/K is like.

bloodkoala · October 3rd, 2006, 14:19

What about using an m16 mount http://www.evike.com/Merchant2/merch..._RIS_RAS_RAILS

(i know its in america but i couldnt be bothered to fins it anywhere else) it has similar holes and looks as though it could mount to a CA36 with out any drilling....

yanhchan · October 3rd, 2006, 16:49

Drill, Sand, Bolt, and Nut. Fits almost RIS piece onto a non RIS item.

Slick · October 3rd, 2006, 16:58

Buy whatever length rail you want. Go to home depot and buy screws, nuts and washers. Oh and might want to think about using a lock nut. Good luck.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 2nd, 2005, 19:03	#1
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Vertical grip and CA36 Hey folks, does anyone know how would one go about fitting a vertical grip onto the hand guard of a CA36? The underside of the hand guard has slots cut into it (http://i5.photobucket.com/albums/y19...r/PICT0006.jpg) (http://www.classicarmy.com/photo/282_P0fA081P%205.jpg) but I don't know if they have anything to do with adding on attachments. Would I have to dremel RIS panels into the underside in order to fit a vert grip? __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

September 2nd, 2005, 19:24	#2
FOX_111 Le Roi des poissons d'avril Trader rating Join Date: Dec 2003 Location: Terrebonne, Québec	hum.. just buy the grip, you will figure it out by yourself. It's pretty easy to attach. almost all RIS goodies attach the same way. EDIT: Do you have the RIS rail to put on the handguard? The photo is quite dark and blury. __________________ Vérificateur d'âge: Terrebonne

September 2nd, 2005, 20:17	#4
FOX_111 Le Roi des poissons d'avril Trader rating Join Date: Dec 2003 Location: Terrebonne, Québec	no duct tape.. just buy the rail and screw it on. Then the vertical grip will fit perfect on it. You should have 2 or 4 screw holes on the grip to fit the rail. __________________ Vérificateur d'âge: Terrebonne

September 2nd, 2005, 19:31	#3
Plant Trader rating Join Date: Feb 2005 Location: Burlington	There is no rail for the full length G36 Handguard's. Well at least they don't come with one, i'm not sure if there are aftermarket products but I know that it does not come with a rail. You could always use duct tape...

September 2nd, 2005, 20:19	#5
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Thanks folks, and those pics aren't mine gun, I'm just including them so people can see what the underside of a standard CA36/K is like. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

October 3rd, 2006, 14:19	#6
bloodkoala Trader rating Join Date: May 2006 Location: california	What about using an m16 mount http://www.evike.com/Merchant2/merch..._RIS_RAS_RAILS (i know its in america but i couldnt be bothered to fins it anywhere else) it has similar holes and looks as though it could mount to a CA36 with out any drilling....

October 3rd, 2006, 16:49	#7
yanhchan Trader rating Join Date: Jun 2005 Location: Scarborough/Richmond Hill ON	Drill, Sand, Bolt, and Nut. Fits almost RIS piece onto a non RIS item. __________________ YANHCHAN'S AIRSMITHING: AEG repair/Tune up/Upgrades V2/V3 mechboxes, rewiring/reconnecting. Ask not what your country can do for you; ask what you can do for your country ~John F. Kennedy

October 3rd, 2006, 16:58	#8
Slick Trader rating Join Date: Feb 2003 Location: North York	Buy whatever length rail you want. Go to home depot and buy screws, nuts and washers. Oh and might want to think about using a lock nut. Good luck. __________________

Vertical grip and CA36

Accessories Discussion