Setup PX888D for Dual Channel Use

[CDN_Rogue]

Hey guys, I have read a lot on the forums on how to program the frequencies on a PUXING. I have no problems setting up single channel use. How do I set up the channels for dual band use? I am using a Puxing 888K and it seems different then my PX888D. It doesn't use "R" and "T" for receive and transmit. It uses "A" and "B". I assume they are the same.

PS NIIIIIIIGGGGGHHHHHHTTTTFFFAAAALLLLLLLLL

[Reignman]

Start with your radio on 1 channel you want to listen to.
Turn the radio to the off position.
Hold in the menu button and turn the radio on.
You should now see two channels listed stacked on top of each other.
Turn the selector knob to change the second channel.

Now the part if forget at the moment is you either hold the menu button or the button to the left of it and the PTT at the same time to switch between those two channels.

The one with "ACH" I believe in front of it is the channel you will xmit on.

Hope this helps..its really early, im not a morning person.

[Hectic]

Shouldnt be that hard.
On mine 888k you tune in channel A you press the center button (enter i think) you will see the B appear by the numerical code for the seccond channel tune it in to what you want (itll shos the channel number in the upper left) then you use enter to change what channel you wanna transmit on if the A is on you can hear A and B but transmit on A and vise versa