G&G feeding problem

[Fox Hound]

hey i am using a G&G r4. Everything is stock btw. Ok the problem i have with my rifle is when i load the mag up with BBS and spin that thing on the bottom of my mag i can only fire 2-3 shots then i have to manually spin the mag thing at the bottom again for it to feed into my rifle. My rifle seems to be working great i think theres something with the mag. If i turn the rifle upside down it feeds perfectly. Or.... do i need an electric mag?

[concept_8]

You have to wind the mag till it clicks with all the high caps I've used when the winder starts clicking the bb chamber is loaded up.
From a freshly filled mag it might seem to take a while but keep winding untill you her it click distinctly.

[damage]

loosen the screw on the tube stock if it is too tight. any further problems with your G&G feel free to pm me.

[dman]

Is this the same with TM M4's? I noticed that my M4 doesn't feed too well on full auto for half of my mags. However, the other half work fine and dandy. Semi works fine on all mags.

[damage]

fully wind the wheel in the bottom until you feel it is tight. dont worry it wont do damage on the mag even if you over wind it. Then try semi and full auto. Then if it still fires like you said above. the problem lies in the gearbox to the hop-up. I dont see the mag will be the problem. I have 2 G&G M4 hicap and it feeds flawlessly. oh I have a G&G GR16 2 R4 as well.