JG G36C upgrades

davedave · May 15th, 2013, 18:22

Hey i've had my JG g36c for quite some time now, it is the older but from what i heard the better of the internals compared to the newer jg g36 coming out. Ive had this gun for about 4+ years and never did anything to it. What types of upgrades would some of you do to this gun making it stand up to the higher end aegs out there?

MaciekA · May 15th, 2013, 19:01

You can take these ridiculous plastic beaters very very far. Nobody will suspect anything until you're out in the field.

Mine has a version 3 Lonex gearbox / motor / motorcage, Extreme Fire SW-SF MOSFET, flat hop bucking/nub. Completely rewired, XT60 connectors, etc. The handguard and outer barrel have both been gutted and sanded and cut to shape (with a Dremel tool) to fit the max size of battery I can manage to get in there. That and I've thrown an M4 magwell into the thing (also did some sanding to it to improve feeding).

It's plasticky and squeaky but it shoots like a champ and is light as a feather.

If your JG G36 is 4+ years old I assume it's also possibly got a semi-clear body so you might want to find some Krylon Ultraflat black and give it a good spraydown.

davedave · May 15th, 2013, 19:34

How much was yur upgrades in total! that sounds like a really good setup, and suprisingly mines all black with orange tip! But im gona look around for parts similiar to this, im decent at jerry riggings things haha, only thing is mosfet seems confusing to me

KenTsui · May 15th, 2013, 19:54

I guess it depends on what your goal is. Higher ROF? Higher accuracy? Better longevity? We can open a whole can of worms here.

davedave · May 15th, 2013, 20:47

I honestly dont care about rof! i was wanting more accuracy maybe bit more fps shooting closer to 390 solid? and longevity would be importanat as well

davedave · May 16th, 2013, 01:29

http://www.airsoftparts.ca/store2/in...oducts_id=2395

would this fit my setup for g36? and what kind of nubs for hopup would bbe suitable?
i know id need a 247mm tbb but what wouldbe the best like a 6.03?

Magnaroth · May 17th, 2013, 18:51

Quote:

Originally Posted by davedave

http://www.airsoftparts.ca/store2/in...oducts_id=2395

would this fit my setup for g36? and what kind of nubs for hopup would bbe suitable?
i know id need a 247mm tbb but what wouldbe the best like a 6.03?

That should fit your gun fine, with no modification needed. As for hopup nubs and buckings, the Promethius Purple are really nice, and not too expensive. It's not a flat-top, but it still works nice. As for your barrel; 6.03 is a good size. You'll get good accuracy with it, while not having to worry about the maintenance of a 6.01, which will jam if not properly maintained on a regular basis. The length of your barell is also up to you, I run mine with a 300mm barrel, and use a small surpressor to cover the extra length. I've noticed a markitable differnece in accuracy because of the extra length.

Personally, I'm looking into getting a Prowin hopup chamber for my G36, but Lonex are just as good from what I hear.

KenTsui · May 17th, 2013, 21:20

If you want accuracy, R-Hop or flat hop is definitely the way to go. You'll keep yourself busy for a long time with that. A barrel with high consistency also helps. My recommendations are Prometheus EDGI 6.03 (steel) and Madbull 6.03 (aluminum). Don't neglect your BB's. IMO it is the most important part of the equation.

To increase FPS, you'll need to improve air seal and system efficiency, and eventually work your way to the spring.

I won't go into too much detail. Here's a good read:

http://forums.airsoftmechanics.com/i...p?topic=6050.0

davedave · May 17th, 2013, 22:18

Thank you guys so much! i really appreciate the info... i've been thinking about just buying a new higher end gun like a g&p m4 varient but i still love the loook of my jg g36c lol i wanna make it a frankenstein that'll suprise everyone..

davedave · May 23rd, 2013, 05:42

Hey guys this is my product list thus far... needed your opinion if this will all be compatible and worth it on my jg g36c... SHS Type 2 cylinder ("M4 hole" - 229-430mm), Lonex Enhanced Hop-up Unit for G36 , Lonex Improved Hop-Up Bucking & Sleeve (70D) ,SHS V3 Bearing Spring Guide , Lonex POM Ventilated Piston Head, Lonex Aluminum Cylinder Head for Ver. 3 . I have no idea what would be an ideal piston . I want to run 390-400fps steady and rof no higher then 20.. the stock motor in the jg seemed okay, and my gears have no issues i dont beleive.

davedave · May 23rd, 2013, 05:44

im also interested in sorbo pads.. and is my gun 6mm bushings?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 15th, 2013, 18:22	#1
davedave Trader rating Join Date: Nov 2011	JG G36C upgrades Hey i've had my JG g36c for quite some time now, it is the older but from what i heard the better of the internals compared to the newer jg g36 coming out. Ive had this gun for about 4+ years and never did anything to it. What types of upgrades would some of you do to this gun making it stand up to the higher end aegs out there?

May 15th, 2013, 19:01	#2
MaciekA Trader rating Join Date: Jun 2011 Location: Portland, Oregon, USA	You can take these ridiculous plastic beaters very very far. Nobody will suspect anything until you're out in the field. Mine has a version 3 Lonex gearbox / motor / motorcage, Extreme Fire SW-SF MOSFET, flat hop bucking/nub. Completely rewired, XT60 connectors, etc. The handguard and outer barrel have both been gutted and sanded and cut to shape (with a Dremel tool) to fit the max size of battery I can manage to get in there. That and I've thrown an M4 magwell into the thing (also did some sanding to it to improve feeding). It's plasticky and squeaky but it shoots like a champ and is light as a feather. If your JG G36 is 4+ years old I assume it's also possibly got a semi-clear body so you might want to find some Krylon Ultraflat black and give it a good spraydown. __________________ "Mah check" Now you know

May 15th, 2013, 19:34	#3
davedave Trader rating Join Date: Nov 2011	How much was yur upgrades in total! that sounds like a really good setup, and suprisingly mines all black with orange tip! But im gona look around for parts similiar to this, im decent at jerry riggings things haha, only thing is mosfet seems confusing to me

May 15th, 2013, 19:54	#4
KenTsui Trader rating Join Date: Dec 2011	I guess it depends on what your goal is. Higher ROF? Higher accuracy? Better longevity? We can open a whole can of worms here.

May 15th, 2013, 20:47	#5
davedave Trader rating Join Date: Nov 2011	I honestly dont care about rof! i was wanting more accuracy maybe bit more fps shooting closer to 390 solid? and longevity would be importanat as well

May 16th, 2013, 01:29	#6
davedave Trader rating Join Date: Nov 2011	http://www.airsoftparts.ca/store2/in...oducts_id=2395 would this fit my setup for g36? and what kind of nubs for hopup would bbe suitable? i know id need a 247mm tbb but what wouldbe the best like a 6.03?

May 17th, 2013, 21:20	#8
KenTsui Trader rating Join Date: Dec 2011	If you want accuracy, R-Hop or flat hop is definitely the way to go. You'll keep yourself busy for a long time with that. A barrel with high consistency also helps. My recommendations are Prometheus EDGI 6.03 (steel) and Madbull 6.03 (aluminum). Don't neglect your BB's. IMO it is the most important part of the equation. To increase FPS, you'll need to improve air seal and system efficiency, and eventually work your way to the spring. I won't go into too much detail. Here's a good read: http://forums.airsoftmechanics.com/i...p?topic=6050.0

May 17th, 2013, 22:18	#9
davedave Trader rating Join Date: Nov 2011	Thank you guys so much! i really appreciate the info... i've been thinking about just buying a new higher end gun like a g&p m4 varient but i still love the loook of my jg g36c lol i wanna make it a frankenstein that'll suprise everyone..

May 23rd, 2013, 05:42	#10
davedave Trader rating Join Date: Nov 2011	Hey guys this is my product list thus far... needed your opinion if this will all be compatible and worth it on my jg g36c... SHS Type 2 cylinder ("M4 hole" - 229-430mm), Lonex Enhanced Hop-up Unit for G36 , Lonex Improved Hop-Up Bucking & Sleeve (70D) ,SHS V3 Bearing Spring Guide , Lonex POM Ventilated Piston Head, Lonex Aluminum Cylinder Head for Ver. 3 . I have no idea what would be an ideal piston . I want to run 390-400fps steady and rof no higher then 20.. the stock motor in the jg seemed okay, and my gears have no issues i dont beleive.

May 23rd, 2013, 05:44	#11
davedave Trader rating Join Date: Nov 2011	im also interested in sorbo pads.. and is my gun 6mm bushings?

JG G36C upgrades

Airsoft Guns Discussion