TM Shotgun nozzle replacement?

MMMiles! · August 14th, 2005, 12:11

Just noticed this on Arnie's, slipped past a few days ago. Paintball-X, a retailer in the US, seems to be offering a metal replacement nozzle for TM M3's (and SPAS-12). For those unfamiliar with the TM shotguns, they're very fun pieces, but have a pretty critical design flaw that manifests itself after a few thousand rounds and turns your shotgun into a paper weight.

There's no picture, and no extra information, but for $US24 it might be worth a shot. Anyone want to give it a try? I know there are dozens of busted TM's out there. If this part works, I'd love to hear about it.

http://www.paintball-x.com/product_i...oducts_id=1135

TheToastmaster · August 14th, 2005, 12:14

I've got mine working again, but if someone wants to do a group order or something, I'll take one.

The Saint · August 14th, 2005, 14:47

Huh, facinating.

MMMiles! · August 14th, 2005, 15:20

I only added it to the news because I loved my TM M3s... great guns, until the nozzle gives out.

sam0182 · August 14th, 2005, 16:10

And Derek who runs Paintball-X/Airsoft-X is a great guy to deal with...drop him a line!

TheToastmaster · August 14th, 2005, 16:20

I may order one to test it out. A metal replacement for that part would be amazing. I just got a replacement from another shotty, but that gets too expensive to have to keep doing.

[Amazing the timing of this part and HoJo's post coming up; Dman's just broke, and I just gave Jugglez $150 for a parts shotty this week. The irony.]

dman · August 14th, 2005, 16:53

Holy crap! My M3 just broke on me yesterday. What luck. I will be ordering it for sure. Anybody else want to do a group order, save on shipping? PM me if you do. I will be buying this by the end of the week for sure.

Jugglez · August 14th, 2005, 17:16

My brother's M3 will probably be needing one of these sooner or later. I've contacted the vendor concerning a group order. Will update in the Group Orders forum when i have the details.

TheToastmaster · August 14th, 2005, 17:34

Just pointing out that the part is also available (in plastic) from WGC, though it was previously only available from DenTrinity.
On WGC it's only $3.40 USD!!!
If these metal ones are no good, it couldn't hurt for shotty owners to just stock up on plastic ones, at less than $5 USD they're practically disposable.

dman · August 14th, 2005, 17:40

Hopefully it doesn't come to that. I can almost see it now:

*PUMP*
*Bang*
(the three BB's just roll out)
"Alright guys, I'll be back in 30 minutes, I gotta go change the nozzle."

TheToastmaster · August 14th, 2005, 17:53

It's easy enough to change if you know how that it COULD come to that. Though it sometimes rips the hopup when it jams, I've heard.

Lord Jebus · August 15th, 2005, 00:49

Group order sounds like a good idea... I'm in for one if someone gets that going

MadMax · August 15th, 2005, 01:07

What?! No picture?

dman · August 15th, 2005, 01:58

Thinking of a little reverse engineering?

MadMax · August 15th, 2005, 02:43

Quote:

Originally Posted by dman

Thinking of a little reverse engineering?

Reverse engineer an identical part made in metal?

I'm guessing they're sand casting aluminum in green sand. I just want to see the metal parts.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 14th, 2005, 12:11	#1
MMMiles! Part man, part machine Trader rating Join Date: Dec 2001 Location: Toronto, Ontario	TM Shotgun nozzle replacement? Just noticed this on Arnie's, slipped past a few days ago. Paintball-X, a retailer in the US, seems to be offering a metal replacement nozzle for TM M3's (and SPAS-12). For those unfamiliar with the TM shotguns, they're very fun pieces, but have a pretty critical design flaw that manifests itself after a few thousand rounds and turns your shotgun into a paper weight. There's no picture, and no extra information, but for $US24 it might be worth a shot. Anyone want to give it a try? I know there are dozens of busted TM's out there. If this part works, I'd love to hear about it. http://www.paintball-x.com/product_i...oducts_id=1135

August 14th, 2005, 12:14	#2
TheToastmaster Trader rating Join Date: Jan 2005 Location: Winnipeg. In a hole.	I've got mine working again, but if someone wants to do a group order or something, I'll take one. __________________ Toast

August 14th, 2005, 14:47	#3
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	Huh, facinating. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

August 14th, 2005, 15:20	#4
MMMiles! Part man, part machine Trader rating Join Date: Dec 2001 Location: Toronto, Ontario	I only added it to the news because I loved my TM M3s... great guns, until the nozzle gives out.

August 14th, 2005, 16:10	#5
sam0182 Trader rating Join Date: Mar 2005 Location: BC	And Derek who runs Paintball-X/Airsoft-X is a great guy to deal with...drop him a line!

August 14th, 2005, 16:20	#6
TheToastmaster Trader rating Join Date: Jan 2005 Location: Winnipeg. In a hole.	I may order one to test it out. A metal replacement for that part would be amazing. I just got a replacement from another shotty, but that gets too expensive to have to keep doing. [Amazing the timing of this part and HoJo's post coming up; Dman's just broke, and I just gave Jugglez $150 for a parts shotty this week. The irony.] __________________ Toast

August 14th, 2005, 16:53	#7
dman Trader rating Join Date: Dec 2001	Holy crap! My M3 just broke on me yesterday. What luck. I will be ordering it for sure. Anybody else want to do a group order, save on shipping? PM me if you do. I will be buying this by the end of the week for sure. __________________ - "dman"

August 14th, 2005, 17:16	#8
Jugglez Trader rating Join Date: Feb 2005 Location: Swimming in a pool of Xpresspost receipts.... Toronto - 400/401	My brother's M3 will probably be needing one of these sooner or later. I've contacted the vendor concerning a group order. Will update in the Group Orders forum when i have the details. __________________

August 14th, 2005, 17:34	#9
TheToastmaster Trader rating Join Date: Jan 2005 Location: Winnipeg. In a hole.	Just pointing out that the part is also available (in plastic) from WGC, though it was previously only available from DenTrinity. On WGC it's only $3.40 USD!!! If these metal ones are no good, it couldn't hurt for shotty owners to just stock up on plastic ones, at less than $5 USD they're practically disposable. __________________ Toast

August 14th, 2005, 17:40	#10
dman Trader rating Join Date: Dec 2001	Hopefully it doesn't come to that. I can almost see it now: PUMP Bang (the three BB's just roll out) "Alright guys, I'll be back in 30 minutes, I gotta go change the nozzle." __________________ - "dman"

August 14th, 2005, 17:53	#11
TheToastmaster Trader rating Join Date: Jan 2005 Location: Winnipeg. In a hole.	It's easy enough to change if you know how that it COULD come to that. Though it sometimes rips the hopup when it jams, I've heard. __________________ Toast

August 15th, 2005, 00:49	#12
Lord Jebus Trader rating Join Date: Mar 2005 Location: Toronto	Group order sounds like a good idea... I'm in for one if someone gets that going __________________

August 15th, 2005, 01:07	#13
MadMax Delierious Designer of Dastardly Detonations Trader rating Join Date: Dec 2001 Location: in the dark recesses of some metal chip filled machine shop	What?! No picture? __________________ Want nearly free GBB gas?

August 15th, 2005, 01:58	#14
dman Trader rating Join Date: Dec 2001	Thinking of a little reverse engineering? __________________ - "dman"

TM Shotgun nozzle replacement?

ASC News and Announcements