Shimming SR16 Motor Problem

PaRkA · August 2nd, 2005, 00:53

Is there something im missing. Ive got one of the little round metal shim things but i cant get the motor to sit just right that and the wires in the pistol grip are limiting movement for the motor. Any suggestions?

Syrinx · August 2nd, 2005, 00:59

I had the same problem... I placed the wires on the same side in the pistol grip... and all is working ok now...

Hope it help's

PaRkA · August 2nd, 2005, 01:05

nono there in the pistol grip but now its to tight for the motor and i cant get it shimmed right.

airsoftpress · August 18th, 2005, 05:29

yes it is a pain in the axx to fit the motor into the M4/M16 grip. Based on our experience, all wires must go from the rear side of the grip to the motor.

ILLusion · August 18th, 2005, 06:30

The wires need to run inside the grooves on the rear interior of the pistol grip.

Sgt.Hartman · October 1st, 2005, 09:18

they are right body, it is common to retry 3 to 4 time to replace the wire.
push them with your finger or a tool to be sure they are contourning the motor hole and that the spring of the motor wont touch them. Then let them run on the rear of the pistol grip. It should have a groove there. Then before placing the spacer and the butt cap be sure by pressing the motor down the hole that it fully release when you remove your finger. If not, replace the wire, it wont work. Now when you put the cap, look for the wire to not get in the butt cap groove path.
I could not be more clear, or can i?

Trader rating · November 3rd, 2005, 09:24

well said
its a common and overlooked problem
as I said in another thread on here, a new grip to replace the shitty TM one can help.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 2nd, 2005, 00:53	#1
PaRkA Trader rating Join Date: May 2005 Location: Whitehorse,YT	Shimming SR16 Motor Problem Is there something im missing. Ive got one of the little round metal shim things but i cant get the motor to sit just right that and the wires in the pistol grip are limiting movement for the motor. Any suggestions? __________________ Bf2 Stats

August 2nd, 2005, 00:59	#2
Syrinx Trader rating Join Date: Nov 2004 Location: Sherbrooke, Qc	I had the same problem... I placed the wires on the same side in the pistol grip... and all is working ok now... Hope it help's __________________ Sgt. Syrinx 2ic Alpha Detachement 1st Pathfinders Regiment

August 2nd, 2005, 01:05	#3
PaRkA Trader rating Join Date: May 2005 Location: Whitehorse,YT	nono there in the pistol grip but now its to tight for the motor and i cant get it shimmed right. __________________ Bf2 Stats

August 18th, 2005, 05:29	#4
airsoftpress Trader rating Join Date: Feb 2005	sr16 wiring yes it is a pain in the axx to fit the motor into the M4/M16 grip. Based on our experience, all wires must go from the rear side of the grip to the motor. __________________ We want anything published by AirsoftPRESS to be useful, interesting, and truthful. http://www.airsoftpress.com 8)

August 18th, 2005, 06:30	#5
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	The wires need to run inside the grooves on the rear interior of the pistol grip. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

October 1st, 2005, 09:18	#6
Sgt.Hartman Trader rating Join Date: Dec 2001 Location: St-bruno	they are right body, it is common to retry 3 to 4 time to replace the wire. push them with your finger or a tool to be sure they are contourning the motor hole and that the spring of the motor wont touch them. Then let them run on the rear of the pistol grip. It should have a groove there. Then before placing the spacer and the butt cap be sure by pressing the motor down the hole that it fully release when you remove your finger. If not, replace the wire, it wont work. Now when you put the cap, look for the wire to not get in the butt cap groove path. I could not be more clear, or can i? __________________ FEAR BRING FOG!!!!! Hell, I like you. You can come over to my house and fuck my sister. -me in full metal jacket -Da pe maorte-

November 3rd, 2005, 09:24	#7
Droc Guest Trader rating	well said its a common and overlooked problem as I said in another thread on here, a new grip to replace the shitty TM one can help.

Shimming SR16 Motor Problem

Doctor's Corner