|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
November 2nd, 2012, 14:34 | #1 |
KWC M92 problems
Hey,
I just recently bought a brand new KWC M92 with a Co2 mag. The gun worked very well out of the box, but the co2 shot too hot for CQB play. So I bought 3 WE M92 Green Gas mags which dropped the FPS to about 310. Other than testing the gun, I haven't really fired it. Yesterday I took it to a game and it had many problems. Firstly, the gun seems to fire several BB's at once while on semi with a single trigger pull. Secondly, while firing the hammer -sometimes- locks back, and sometimes does not. Feels like it's skipping and often does not fire anything at all. Again, the gun is brand new. Oiled properly before use. I'm thinking this is due to the WE magazines. Any help would be appreciated, thank you. |
|
November 2nd, 2012, 14:53 | #2 |
I would check your mag release, i had the same issues with my m9 (minus the multiple bbs) andi found that the mag release was worn enough to allow the mag to drop 1\8th thus not allowing it to fire or blow back properly to engage the hammer.
Sent from my T8788 using Board Express |
|
November 2nd, 2012, 15:36 | #3 |
I had that problem ...... Take a look if the tiny spring under the grip panel is still on place .
hope you understand my pre-school english
__________________
Level 14332623 Certified Killer |
|
November 2nd, 2012, 15:41 | #4 |
Are you sure KWC is compatible with WE magazines? I thought WE Berettas were proprietary.
|
|
November 2nd, 2012, 15:46 | #5 |
I can't speak for all of them, but I've used a Marui magazine in a WE rebrand Beretta and vice versa. The question is whether KWC and Marui/WE is compatible, though.
__________________
This message was brought to you by Umbrella Inc. |
|
November 2nd, 2012, 15:52 | #6 | |
Quote:
I understand that the mags are likely what is causing the problem, but I was hoping to get something more specific in regard to the problem. |
||
November 2nd, 2012, 15:58 | #7 |
You could also just buy a KWC propane mag and try that. Might answer all your questions.
|
|
November 2nd, 2012, 16:07 | #8 |
November 2nd, 2012, 16:39 | #9 |
I've just giving suggestions/solutions. If you find out it's the mag you'll have to replace them anyway.
|
|
|
Bookmarks |
|
|