KJW Glock 23 Question

[McKee]

I am in the process of fixing up some KJW glocks. My question is what is part 53A in this diagram?

http://tech.airsoftcanada.com/KJ/kj-g23s.jpg

What is this spring for and where does it fit in? I dont have it in either of my guns (23 & 32c). Can anyone explain/post pics?

Thanks.

[e-luder]

that springpulls the valve knocker back when the disconnector is tripped thereby readying the valve knocker for a strike on the magazine valve.

The closed loop attaches to a pin(part 46) that hold sear in place and the open looped end should attach somewhere on your valve knocker.

[McKee]

Originally Posted by e-luder

that springpulls the valve knocker back when the disconnector is tripped thereby readying the valve knocker for a strike on the magazine valve.

The closed loop attaches to a pin(part 46) that hold sear in place and the open looped end should attach somewhere on your valve knocker.

Isn't that what 53b is for though?

[McKee]

Another point, the TM diagram does have this part either. WHAT ARE YOU!!!

http://i314.photobucket.com/albums/l...partslist1.jpg

[e-luder]

53b is the sear spring not the knocker spring.
53b is the spring the locks the sear to the hammer.

[McKee]

Yeah both these glocks I have are missing that spring then and I cant figure out where one would even go. Can any G23 or 32c owners hook me up with a pic?

[ARC-74]

G27 parts diagram on left, G23 on the right.
Notice that the valve knocker(part 48) is a different shape. Diagram on right requires part 53A & 53B, where in the left diagram, part 53 is a different shape
On my G32C the parts look like the diagram on the left.
Look at the shape of your valve knocker, hope that helps .

[McKee]

Mislabelled diagram. Whoda thunk. Thank you ARC-74 mystery solved.