|
|
|
March 5th, 2012, 13:27
|
#1 |
|
King Arms Colt M4A1
This is one is good right? If I get it should i downgrade it or just use .25's?
Last edited by ILLusion; March 5th, 2012 at 14:27.. |
|
|
|
March 5th, 2012, 13:32
|
#2 | |
|
Cobalt Caliber
|
Downgrade and use .25s
And yes its good. But downgrade AND use .25 BB Bastards.
__________________
Quote:
|
|
|
|
|
|
March 5th, 2012, 13:34
|
#3 |
|
it's a great gun but like Cobalt said you'll have to downgrade
|
|
|
|
|
March 5th, 2012, 13:39
|
#4 |
|
|
If I downgrade it what should I change?
|
|
|
|
|
March 5th, 2012, 13:41
|
#5 |
|
|
change the spring to a 110
|
|
|
|
|
March 5th, 2012, 13:45
|
#6 |
|
Or 100 for CQB.
__________________
 King Arms M4A1 Colt : ICS M4 C-15 : KJW G23
|
|
|
|
|
March 5th, 2012, 13:48
|
#7 | |
|
Cobalt Caliber
|
FYI just so you know why your downgrading.
The higher the weight of the BB the slower it'll travel. Field limits (not goals, limits) are often 400fps with .20 bbs hop up off. Now a .25 might drop the FPS to 400 if its shooting 420 with .20 but it will hit harder than 400fps with .20 which can be unsafe. So .20 400fps is your limit (not goal).
__________________
Quote:
|
|
|
|
|
|
March 5th, 2012, 13:48
|
#8 |
|
|
how much fps is decreased if i use 100?
|
|
|
|
|
March 5th, 2012, 13:54
|
#9 | |
|
Cobalt Caliber
|
__________________
Quote:
|
|
|
|
|
|
March 5th, 2012, 14:45
|
#10 |
|
I have a STS M100 with Tightborre 247mm and ARS hopup rubber in my Velocity arms V4A1 and I am at 359 to 362fps with .2g. I highly recommend you to go with a M90. Better be on the safe than on the limit, and 320 fps is a good range to be in at CQB.
|
|
|
|
|
March 5th, 2012, 14:58
|
#11 | |
|
|
Quote:
__________________
King Arms M4A1 Colt : ICS M4 C-15 : KJW G23
|
|
|
|
|
|
March 5th, 2012, 14:58
|
#12 |
|
Yea if you want CQB velocity the M90 is the safe bet. An M100 will likely put you right around the limit so it may or may not be over 350 FPS. The M110 would be my choice for an outdoor gun. In my experiences it usually gives you 380 FPS.
However, for now and the future, upgrades and parts make a huge difference in FPS. For example, I have a DMR with a M110 spring that shoots 430 FPS, and had an M120 in another gun shooting 420 FPS. |
|
|
|
|
March 5th, 2012, 15:04
|
#13 | |
|
Cobalt Caliber
|
For a new guy worry about springs for now. Leave the internals till something breaks then work on it. Unless you want to have it done by a gun doc but then your slapping on extra cash. or you learn how to upgrade yourself. Youtube Version 2 mechbox airsoft
__________________
Quote:
|
|
|
|
|
|
March 5th, 2012, 15:04
|
#14 |
|
|
How about if I put in an RIS system what batteries should i use? Other than Li-po, if possible.
|
|
|
|
|
March 5th, 2012, 15:07
|
#15 |
|
a.k.a. flamethis
|
I think there is a PEQ box by King Arms that holds a 9.6v. That's about your only choice for an RIS and no lipo.
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
