Specific V3 AUG Gearbox Part?

EdisLeado · April 13th, 2011, 19:06

I was looking through this thread to fix the problem of semi-auto not working on my AUG.

It appears that this part has been so worn down that the trigger can't 'catch' onto it to fire it in semi-auto instead of full-auto. I've tried shaving part of it down to get that 'grip' back (as the tutorial suggests), but it appears the part really is just too worn down from years of use.

So, I'm wondering where I could possibly find a place to get this part in particular to replace my worn down one?

Any help would be appreciated, much thanks!

lord_sid · April 13th, 2011, 21:34

I had the same problem with my older aug.

I fixed it by using epoxy. Just make add the epoxy to the channel to make it flush across the whole thing. Let it dry. Grind out a new edge for the trigger to catch on.

Make sure the new edge is the correct location on the part. if its to far from the edge of the part, it wont fire semi at the first stage of the trigger. If its to near the edge of the part, it will fire before you finish the full pull of the first stage of the trigger.

I can take a pic of mine if you want (i would need to take it apart)

You can't use a standard v3 part because the aug one is a bit longer.

EdisLeado · April 14th, 2011, 21:12

I went out to buy the epoxy and I applied it onto that part. I'm having a little trouble 'grinding' it out though. What did you use?

Kos-Mos · April 14th, 2011, 21:16

That part is sold in a V3 trigger unit.

You can't just get that one, but the whole trigger unit. It's not expensive and usually comes with quality wires pre-attached.

EdisLeado · April 14th, 2011, 21:23

Quote:

Originally Posted by Kos-Mos

That part is sold in a V3 trigger unit.

You can't just get that one, but the whole trigger unit. It's not expensive and usually comes with quality wires pre-attached.

Ah. So where exactly would I be able to buy a V3 AUG trigger unit?

ArcticFox1984 · April 14th, 2011, 21:29

I have a spare TM Aug trigger switch; contact me.

Otherwise; I believe Echo1 USA sells them aftermarket... might be the only company to do so.

http://www.airsoftgi.com/product_inf...oducts_id=4029

Kos-Mos · April 14th, 2011, 23:20

Quote:

Originally Posted by EdisLeado

Ah. So where exactly would I be able to buy a V3 AUG trigger unit?

About anywhere they sell airsoft.

http://www.airsoftparts.ca/store2/in...oducts_id=1365

lord_sid · April 15th, 2011, 05:31

i used a rotory tool with a cone diamond point bit to grind it out.

ArcticFox1984 · April 19th, 2011, 09:03

Quote:

Originally Posted by Kos-Mos

About anywhere they sell airsoft.

http://www.airsoftparts.ca/store2/in...oducts_id=1365

The AUG uses a unique switch, a standard V3 does not fit.

Kos-Mos · April 19th, 2011, 17:01

The outer switch is an ad-on.

The inner switch is the same.
Basically, the outer switch by-pass the inner one when the trigger is full rear.

ArcticFox1984 · April 22nd, 2011, 14:39

No, the inner switch is different.

You cannot put an AK style trigger group into an AUG.

Kos-Mos · April 22nd, 2011, 18:06

Quote:

Originally Posted by ArcticFox1984

No, the inner switch is different.

You cannot put an AK style trigger group into an AUG.

Well, sorry.

I did the impossible. Twice.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 13th, 2011, 19:06	#1
EdisLeado Trader rating Join Date: Jul 2010 Location: Ottawa, ON	Specific V3 AUG Gearbox Part? I was looking through this thread to fix the problem of semi-auto not working on my AUG. It appears that this part has been so worn down that the trigger can't 'catch' onto it to fire it in semi-auto instead of full-auto. I've tried shaving part of it down to get that 'grip' back (as the tutorial suggests), but it appears the part really is just too worn down from years of use. So, I'm wondering where I could possibly find a place to get this part in particular to replace my worn down one? Any help would be appreciated, much thanks!

April 13th, 2011, 21:34	#2
lord_sid Trader rating Join Date: Oct 2004 Location: Windsor, Ontario	I had the same problem with my older aug. I fixed it by using epoxy. Just make add the epoxy to the channel to make it flush across the whole thing. Let it dry. Grind out a new edge for the trigger to catch on. Make sure the new edge is the correct location on the part. if its to far from the edge of the part, it wont fire semi at the first stage of the trigger. If its to near the edge of the part, it will fire before you finish the full pull of the first stage of the trigger. I can take a pic of mine if you want (i would need to take it apart) You can't use a standard v3 part because the aug one is a bit longer. __________________ TM Steyr Aug A2 (Phantom) : TM Steyr Aug A2 (RIS) : Aftermath Steyr A2 (CQB) : APS Aug A1 H-Bar - 10 Low-Cap, 4 Mid-Cap and 2 Real-Cap Mags TM/KJW G26 - 4 Mags KJW KP-05 Hi-Capa - 2 Regular and 5 Extended Mags Crossman S36P DEAD - 14 Shells Old Buy/Sell Feedback

April 14th, 2011, 21:29	#6
ArcticFox1984 Trader rating Join Date: Feb 2007 Location: Toronto, Ontario	I have a spare TM Aug trigger switch; contact me. Otherwise; I believe Echo1 USA sells them aftermarket... might be the only company to do so. http://www.airsoftgi.com/product_inf...oducts_id=4029 Last edited by ArcticFox1984; April 14th, 2011 at 21:32..

April 14th, 2011, 21:12	#3
EdisLeado Trader rating Join Date: Jul 2010 Location: Ottawa, ON	I went out to buy the epoxy and I applied it onto that part. I'm having a little trouble 'grinding' it out though. What did you use?

April 15th, 2011, 05:31	#8
lord_sid Trader rating Join Date: Oct 2004 Location: Windsor, Ontario	i used a rotory tool with a cone diamond point bit to grind it out. __________________ TM Steyr Aug A2 (Phantom) : TM Steyr Aug A2 (RIS) : Aftermath Steyr A2 (CQB) : APS Aug A1 H-Bar - 10 Low-Cap, 4 Mid-Cap and 2 Real-Cap Mags TM/KJW G26 - 4 Mags KJW KP-05 Hi-Capa - 2 Regular and 5 Extended Mags Crossman S36P DEAD - 14 Shells Old Buy/Sell Feedback

April 22nd, 2011, 14:39	#11
ArcticFox1984 Trader rating Join Date: Feb 2007 Location: Toronto, Ontario	No, the inner switch is different. You cannot put an AK style trigger group into an AUG. Last edited by ArcticFox1984; April 22nd, 2011 at 14:43..

Specific V3 AUG Gearbox Part?

Doctor's Corner