Motor Tabs

Z06Jake · January 15th, 2011, 14:08

Does anyone have a good solution for a broken motor tab/ connector? It seems they were bent too much and snapped off.
Thanks

Renegade) · January 15th, 2011, 14:16

Find someones broken motor and replace the ends... Otherwise, soldering wires direct or making your own tab and attaching it to the screw of the motor end.

Shell Shock · January 16th, 2011, 16:10

Quote:

Originally Posted by Renegade)

Find someones broken motor and replace the ends... Otherwise, soldering wires direct or making your own tab and attaching it to the screw of the motor end.

if you go with this method, i would suggest you make sure the wires are long enough to reach the tabs. sounds stupid and obvious but, youd be surprised..

Skladfin · January 16th, 2011, 16:20

there are systema replacements from ehobby.

venture · January 16th, 2011, 17:53

get a thin piece of metal and shape it to be a tab. Then bore a hole in it the size of the screw in the end of the motor. Remove the screw and place the new tab and screw the new tab in place. Works great and is cheapest method.

Z06Jake · January 18th, 2011, 04:26

good stuff. thanks for the suggestions.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 15th, 2011, 14:08	#1
Z06Jake Trader rating Join Date: Aug 2010 Location: St. Louis MO.	Motor Tabs Does anyone have a good solution for a broken motor tab/ connector? It seems they were bent too much and snapped off. Thanks

January 15th, 2011, 14:16	#2
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	Find someones broken motor and replace the ends... Otherwise, soldering wires direct or making your own tab and attaching it to the screw of the motor end. __________________ W1-5

January 16th, 2011, 17:53	#5
venture Trader rating Join Date: Jun 2005 Location: Halifax	get a thin piece of metal and shape it to be a tab. Then bore a hole in it the size of the screw in the end of the motor. Remove the screw and place the new tab and screw the new tab in place. Works great and is cheapest method. __________________ Visit us at :www.ventureairsoft.ca

January 16th, 2011, 16:20	#4
Skladfin Trader rating Join Date: Dec 2006 Location: Glace Bay, Nova Scotia	there are systema replacements from ehobby.

January 18th, 2011, 04:26	#6
Z06Jake Trader rating Join Date: Aug 2010 Location: St. Louis MO.	good stuff. thanks for the suggestions.

Motor Tabs

Doctor's Corner