High cycle on Li-Po?

[doc_pathfinders]

Lo' all..

this is just for my own interest, but has anyone used any of the new high-cycle marui guns with an 11.1v Li-Po?

any video's on you-tube?

i keep on coming back to the redwolf vid wich, while it's funny doesn't answer my question which is... what does it sound like? and if possible BB/s?

do i expect a retard to say i 'shouldn't do that because it'll blow up' yes, but i'm interested in what the effects are, because i love lasers

I wish to snow people under with my voluminous white load ejecting from my rifle..

[Kid]

Originally Posted by doc_pathfinders

I wish to snow people under with my voluminous white load ejecting from my rifle..

I know nothing of these high cycle guns, but my suggestion is this - if you're going to put a gun through the heavy wear and tear of an extremely high ROF setup, don't get a gun with a lot of proprietary parts.

[sushicake]

Originally Posted by Kid

I know nothing of these high cycle guns, but my suggestion is this - if you're going to put a gun through the heavy wear and tear of an extremely high ROF setup, don't get a gun with a lot of proprietary parts.

The hi-cycle guns are just normal TM Based AEG's with a highspeed gearbox and a new motor.

It'd probably strip everything within a matter of seconds, I threw a high cycle motor into my old M4 I plugged a 9.6v into it and stripped my piston, snapped my tappet plate and broke the ARL spring. So imagine that on lipo... I only used a 9.6v

[mr_nuts31]

I have a hi cycle motor on my vfc scar and I got a bit bored once and started recording the difference.

On a 8.4v with the stock motor on the scar went about 13 rps

On a 8.4v with the high cycle motor, the rps went up to 15-16 rps

On a 9.6v with the high cycle motor, the rps was about 18-19 rps

I don't have a 11.1v lipo so I've yet to test the rps on it.

Bear in mind, the gearbox in the scar is all stock vfc. If anybody wants pics or vid to see the effects, let me know.

[THe_Silencer]

The main part that makes the high cycle guns insanely fast is the EG30000 motor. I Would estimate that a gun running an 11.1 lipo with the motor and standard ratio gears should easily get 35+ RPS. Whether or not your internals would explode is dependent on how good they are. Any gun that can nominally handle 30+ RPS ROF should be fine with the EG30000

[Wh1t3y]

I wish to snow people under with my voluminous white load ejecting from my rifle..

Sig'd. <3