Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Need some help choosing a gun

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old August 26th, 2010, 13:13   #1
Cyklops
 
Cyklops's Avatar
 
Join Date: Aug 2010
Location: CBS, Newfoundland
Need some help choosing a gun

Hey there guys, currently ive been browsing around for a new gun online. Thing is, I find it hard to actually come across a website that will not only ship to Canada without no problems (item taken at border, etc) but also my part of Canada which is Newfoundland.

Here in Newfoundland there are no airsoft stores where you can buy good quality guns, we only have wal-mart and Canadian Tire. Currently I own an electric M4 variant from wal-mart, comes with two mags (holding 200 bbs) and two batteries. Thing is, this gun has no power, no accuracy and is very fragile so im in the market for a new gun.

Here are a few ive been looking at, I was hoping you guys could direct me towards the best ones. Also, I have a low budget as im only in High School still and would rather a spring/bolt action. No particular reason, its just what a I like.

https://www.buyairsoft.ca/rifles/spr...n-s-famas.html

https://www.buyairsoft.ca/rifles/spr...per-rifle.html

http://www.eastcoastairsoft.com/gen-...ack-p-717.html

http://www.eastcoastairsoft.com/echo...ock-p-863.html

http://www.eastcoastairsoft.com/ak-n...fle-p-885.html
Cyklops is offline   Reply With Quote
Old August 26th, 2010, 13:17   #2
pewpew
 
pewpew's Avatar
 
Join Date: Jul 2010
Location: winnipeg, mb
there is a decent selection on the classified section if you get yourself age verified.
there is in fact a few suppliers in Nova Scotia as well.
get yourself AV'ed and you will get more help.

Last edited by pewpew; August 26th, 2010 at 13:20.. Reason: might not be 18
pewpew is offline   Reply With Quote
Old August 26th, 2010, 13:20   #3
Cyklops
 
Cyklops's Avatar
 
Join Date: Aug 2010
Location: CBS, Newfoundland
Quote:
Originally Posted by pewpew View Post
there is a decent selection on the classified section if you get yourself age verified.
there is in fact a few suppliers in Nova Scotia as well.
get yourself AV'ed and you will get more help.

ps: if you dont want to wait and are 18+ take a look at the stinger 34p at CT, lots of good reviews on here
Alright, sounds good!
Cyklops is offline   Reply With Quote
Old August 26th, 2010, 13:22   #4
pewpew
 
pewpew's Avatar
 
Join Date: Jul 2010
Location: winnipeg, mb
also, dont try to import guns---you will most likely lose you money. not worth it.
pewpew is offline   Reply With Quote
Old August 26th, 2010, 13:27   #5
Cyklops
 
Cyklops's Avatar
 
Join Date: Aug 2010
Location: CBS, Newfoundland
ok ill remember that.
Cyklops is offline   Reply With Quote
Old August 26th, 2010, 14:05   #6
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Of the rifles you listed, I would recommend none of them lol
Obviously get AV'd first
But while your just looking there's nothing wrong with giving you advice

So first off, the FAMAS is a version 1 mechbox, they're not necessarily bad, but they're not fantastic. As far as mods, it's not a very versatile platform...

And (sorry I don't know how long you may or may not have been playing), but everyone recommends against getting a sniper rifle for your first gun. Be a rifleman first and work on your fieldcraft and accuracy first. Most of sniping is being sneaky, you can learn how to do that with an AEG easily enough!

So as for brands, tokyo marui is really the best thing to start off with. Yes it's more expensive than clones or some of the lower end stuff, but it's well worth it.
It's plastic, but it's tough plastic. The internals are nigh invincible when left stock, and thus very cheap to maintain. They keep their value very well, so you can sell it later down the road to put a fairly large deposit on a full metal AEG. And they're guaranteed to be 100% compatible with all upgrades since everything is based on their design
ThunderCactus is offline   Reply With Quote
Old August 26th, 2010, 14:27   #7
Love
formerly Lythinca
 
Love's Avatar
 
Join Date: Oct 2008
Location: You know that Home Depot on King st? Yeah, no where near there.
Send a message via AIM to Love Send a message via MSN to Love
ECHO 1 M249 Para. Full metal, sexy, heavy, sexy, and feels nice. hahaha
__________________
Currently modding AK.

Loadout 1:
Yugoslavian M76/Maadi RML Alternative (Kraken)
CYMA Glock 18C

Loadout 2:
TM MP5 w/ flashlight
CYMA Glock 18C

Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig.
Love is offline   Reply With Quote
Old August 26th, 2010, 17:24   #8
Cyklops
 
Cyklops's Avatar
 
Join Date: Aug 2010
Location: CBS, Newfoundland
Quote:
Originally Posted by ThunderCactus View Post
Of the rifles you listed, I would recommend none of them lol
Obviously get AV'd first
But while your just looking there's nothing wrong with giving you advice

So first off, the FAMAS is a version 1 mechbox, they're not necessarily bad, but they're not fantastic. As far as mods, it's not a very versatile platform...

And (sorry I don't know how long you may or may not have been playing), but everyone recommends against getting a sniper rifle for your first gun. Be a rifleman first and work on your fieldcraft and accuracy first. Most of sniping is being sneaky, you can learn how to do that with an AEG easily enough!

So as for brands, tokyo marui is really the best thing to start off with. Yes it's more expensive than clones or some of the lower end stuff, but it's well worth it.
It's plastic, but it's tough plastic. The internals are nigh invincible when left stock, and thus very cheap to maintain. They keep their value very well, so you can sell it later down the road to put a fairly large deposit on a full metal AEG. And they're guaranteed to be 100% compatible with all upgrades since everything is based on their design
Makes sense about not getting a sniper for a first gun. However, I am pretty decent at the hole sneaking around thing right now. I love confusing the enemy and making them paranoid as to where exactly I am. Although, I was mostly leaning towards the FAMAS, and it doesn't matter if its not upgradeable because right now I just don't have the money. Im only in high school and don't have a job atm so I have to do with what money I have.
Cyklops is offline   Reply With Quote
Old August 26th, 2010, 18:20   #9
Canadian Psycho
Personal Mule.....PM for rates!
 
Canadian Psycho's Avatar
 
Join Date: Oct 2004
Location: Alberta
Send a message via MSN to Canadian Psycho
The FAMAS is completely impossible to upgrade/fix. It is a spring gun same as the sniper, just not as good. Save your money.
__________________
"Those who have long enjoyed such privileges as we enjoy, forget in time that men have died to win them"
Franklin D. Roosevelt
Canadian Psycho is offline   Reply With Quote
Old August 26th, 2010, 18:48   #10
scurvythepirate
 
scurvythepirate's Avatar
 
Join Date: Nov 2007
Location: Kelowna,BC
Quote:
Originally Posted by Cyklops View Post
Makes sense about not getting a sniper for a first gun. However, I am pretty decent at the hole sneaking around thing right now. I love confusing the enemy and making them paranoid as to where exactly I am. Although, I was mostly leaning towards the FAMAS, and it doesn't matter if its not upgradeable because right now I just don't have the money. Im only in high school and don't have a job atm so I have to do with what money I have.
Save up and buy something decent,
think of it this way, you buy a shitty gun, it will most likely break within a couple of weeks. buy something good, and it might last you (with proper maintenance and care) over 10 years.

Take a look at this thread: http://www.airsoftcanada.com/showthr...gear+buy+guide
__________________
scurvythepirate is offline   Reply With Quote
Old August 26th, 2010, 19:40   #11
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
Actually upgradeability is a REALLY important thing to look at, because even if you can't afford to upgrade it now, you will most definitely want to in the future, and it's also a good trait to have when the gun eventually breaks down!
ThunderCactus is offline   Reply With Quote
Old August 26th, 2010, 20:41   #12
Cyklops
 
Cyklops's Avatar
 
Join Date: Aug 2010
Location: CBS, Newfoundland
I have to thank everybody for their help so far. But just to give you guys an idea of what I have now and why I really do need a better gun. Here are just some of the specs:

-Its nowhere near actual size, its extremely small (Supposed to be an M4)
-Fragile, weak plastic, already starting to come apart and only bought at the beginning of summer
-only shoots like 250fps maybe less and has terrible accuracy, bullets go everywhere when on both semi and full auto
-2 batteries take 4 hours to charge and last just a little over an hour
-Was bought from wal-mart as an exchange for an old shotgun because the spring went in the mag


Right now im looking at some m14's, they look alright to me so far.
Cyklops is offline   Reply With Quote
Old August 26th, 2010, 22:23   #13
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
M14's are pretty solid
Anyway, look at what tokyo marui has, they're plastic guns but they're tougher than some of the metal chinese guns for the same price and way better in the long run.
ThunderCactus is offline   Reply With Quote
Old August 26th, 2010, 22:39   #14
Cyklops
 
Cyklops's Avatar
 
Join Date: Aug 2010
Location: CBS, Newfoundland
Quote:
Originally Posted by ThunderCactus View Post
M14's are pretty solid
Anyway, look at what tokyo marui has, they're plastic guns but they're tougher than some of the metal chinese guns for the same price and way better in the long run.
Alright, ill have to take a look sometime soon! And just to give a better idea of what gun I currently own, just look at this.....

http://www.pyramydair.com/p/crosman-...soft-gun.shtml

Only difference is, mine does't have the scope and actually loads into clips of 200 each. And my battery is in the main barrell.
Cyklops is offline   Reply With Quote
Old August 26th, 2010, 23:22   #15
Brokenwings
 
Join Date: Apr 2010
Location: Ottawa, Orleans (Ontario)
Urgh..cancer.
Get Av'ed man, and you'll wonder what the hell you were thinking buying those guns :P
you'll drool, you'll cry, you'll laugh.

M14's with a real wooden body...mmmm. So beautiful.
Get AV'ed!
Brokenwings is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 03:44.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.