|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
March 26th, 2010, 20:15
|
#1 |
|
CA G36 Hop up disasembly?
Does anyone know of any video, or step by step instructions as to disasembling a CA G36 hopup unit? im converting my E to a C, but dont know how to swap the inner barrel. i cant seem to find any videos on youtube, and have tried searching ASC, but havent had any luck. if anyone can help, i would really appreciate it, thanks.
|
|
|
|
March 26th, 2010, 21:09
|
#2 |
|
The SIG uses a similar hop unit, the rotating piece simple pulls off with a small amount of force to reviel the c-clip and then the rest is gravey
__________________
Con Murder Dark Rhino L.A. Airsoft |
|
|
|
|
March 27th, 2010, 00:57
|
#3 | |
|
1. Remove foregrip.
2. Remove 3 screws holding gas tube/outer barrel assembly to body. 3. Slide gas assembly forward out of gun. 4. Grasp hop-up unit firmly, push toward the front of the assembly slightly, and twist 90 degrees (can't remember which way, but it will only turn one way) 5. Slide hop-up and inner barrel out of outer-barrel assembly. 6. Remove black plastic clip holding the barrel in (located infront of hop-up assembly) 7. CAREFULLY slide the barrel out of the hop-up.
__________________
 Quote:
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
