Disconnect Terminal

Rotting · March 9th, 2009, 21:13

The small little disconnect terminals that attach to the motor inside the handle of my SiG 552 were destroyed in my previous match. I tried going to local places, such as home hardware, canadian tire, home depot, the source, etc, buyt the only ones that they have are ones for larger appliances.

so my question is does anyone know where to get some of the tiny little disconnect terminals that are attached to the wires that link tot he motor inside a gun? A link would be appreciated. Thanks.

The Saint · March 9th, 2009, 21:16

http://www.airsoftcanada.com/showthr...tor+connectors

Rotting · March 9th, 2009, 23:45

No luck.

Went to Canadian Tire, Home Depot, Home Hardware, The Source, BestBuy, Futureshop, WalMart, Electrozad, Outbreak. Nothing.

Everything except Outbreak had clips, but they were very large clips. Normally I'd just try to form my own, but I don't have the tools to do that. Outbreak was just a waste of gas, since it's a freakin paintball store, hence why I never listen to 17 year old Canadian Tire employees.

anyone got any other suggestions? :\

Amos · March 9th, 2009, 23:46

take the wire and solder it directly to the motor terminal

The Saint · March 9th, 2009, 23:49

I got my last batch from Canadian Tire, I'm surprised they don't have them. Is it one of them small CT with next to nothing or something? They'll have big plastic tube on one end, but those are removable.

Rotting · March 9th, 2009, 23:56

I think I need to go up to Waterloo, heh.

They do have the ones with plastic tubes on one end, or ones cased in plastic, but once stripped down they're too large for the motor still. All the ones I ran into are the ones that I use at work (I'm a technician). I could tell just at a glance that they were too large, heh.

The guy from ASP ran out of the gold plated prometheus ones, and won't be ordering for another 2 weeks, and I have a game in about 2 weeks

Amos · March 10th, 2009, 02:16

step 1: Solder wire to motor

step 2: don't worry about little connectors breaking / coming off in game.

step 3: ???

step 4: Airsoft!

coach · March 10th, 2009, 09:16

airsoftparts.ca is out of stock but you could always ask Jugglez to pre-order them for you.

baker_Jeff · March 10th, 2009, 09:35

http://capitalairsoft.ca/store/index...roducts_id=174

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 9th, 2009, 21:13	#1
Rotting Roko Trader rating Join Date: Feb 2009 Location: Windsor, Ontario	Disconnect Terminal The small little disconnect terminals that attach to the motor inside the handle of my SiG 552 were destroyed in my previous match. I tried going to local places, such as home hardware, canadian tire, home depot, the source, etc, buyt the only ones that they have are ones for larger appliances. so my question is does anyone know where to get some of the tiny little disconnect terminals that are attached to the wires that link tot he motor inside a gun? A link would be appreciated. Thanks. __________________ Primary: Custom WE M16A3 Secondary: KWA MP9 Side: Custom WE M1911A1

March 9th, 2009, 21:16	#2
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	http://www.airsoftcanada.com/showthr...tor+connectors __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

March 9th, 2009, 23:45	#3
Rotting Roko Trader rating Join Date: Feb 2009 Location: Windsor, Ontario	No luck. Went to Canadian Tire, Home Depot, Home Hardware, The Source, BestBuy, Futureshop, WalMart, Electrozad, Outbreak. Nothing. Everything except Outbreak had clips, but they were very large clips. Normally I'd just try to form my own, but I don't have the tools to do that. Outbreak was just a waste of gas, since it's a freakin paintball store, hence why I never listen to 17 year old Canadian Tire employees. anyone got any other suggestions? :\ __________________ Primary: Custom WE M16A3 Secondary: KWA MP9 Side: Custom WE M1911A1

March 9th, 2009, 23:46	#4
Amos Trader rating Join Date: Aug 2006 Location: Japan	take the wire and solder it directly to the motor terminal __________________ Custom Builds: FA3674U Krinkov G3SD6

March 9th, 2009, 23:49	#5
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	I got my last batch from Canadian Tire, I'm surprised they don't have them. Is it one of them small CT with next to nothing or something? They'll have big plastic tube on one end, but those are removable. __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

March 9th, 2009, 23:56	#6
Rotting Roko Trader rating Join Date: Feb 2009 Location: Windsor, Ontario	I think I need to go up to Waterloo, heh. They do have the ones with plastic tubes on one end, or ones cased in plastic, but once stripped down they're too large for the motor still. All the ones I ran into are the ones that I use at work (I'm a technician). I could tell just at a glance that they were too large, heh. The guy from ASP ran out of the gold plated prometheus ones, and won't be ordering for another 2 weeks, and I have a game in about 2 weeks __________________ Primary: Custom WE M16A3 Secondary: KWA MP9 Side: Custom WE M1911A1

March 10th, 2009, 02:16	#7
Amos Trader rating Join Date: Aug 2006 Location: Japan	step 1: Solder wire to motor step 2: don't worry about little connectors breaking / coming off in game. step 3: ??? step 4: Airsoft! __________________ Custom Builds: FA3674U Krinkov G3SD6

March 10th, 2009, 09:16	#8
coach aka coachster Trader rating Join Date: Mar 2008 Location: T dot	airsoftparts.ca is out of stock but you could always ask Jugglez to pre-order them for you.

March 10th, 2009, 09:35	#9
baker_Jeff Trader rating Join Date: May 2008 Location: Edmonton, AB	http://capitalairsoft.ca/store/index...roducts_id=174 __________________ Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16

Disconnect Terminal

Doctor's Corner