KSC G19 bb's Dropping Out of barrel

Nick_273 · March 2nd, 2009, 21:11

Hi there, I read about a similar problem some time ago and tried searching the forums for info but couldn't find anything (maybe it was on another site)...So here goes.

When I fire, instead of shooting the bb out with a high velocity like it should, the bb just drops out of the inner barrel. The blowback seems fine, its just that the bb's do not have enough force to propel them out of the inner barrel with some power. I tried turning the hop-up all the way down because i thought this may be stopping the bb's from going anywhere but the same thing still happens.

Any ideas appreciated!

Styrak · March 2nd, 2009, 21:18

Probably has to do with the internal gas parts, and the valve inside the blowback unit.

Qlong · March 2nd, 2009, 21:31

Check parts #24 and #25. The head of the rocket valve should be pushed up against the pin (part #26) by the spring (part #25).

Nick_273 · March 2nd, 2009, 21:45

I replaced the rocket valve (part 24) with spare one that i had lying around and now it works fine. Its strange because the rocket valve i had in there before was metal too and wasn't broken or deformed.

Thanks for the help guys.

CDN_Stalker · March 2nd, 2009, 22:04

Good chance a double feed too. One BB rips out and the other drops out. Or, your hop up rubber is FUBAR.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 2nd, 2009, 21:11	#1
Nick_273 Trader rating Join Date: Jan 2006 Location: Vancouver Island, BC	KSC G19 bb's Dropping Out of barrel Hi there, I read about a similar problem some time ago and tried searching the forums for info but couldn't find anything (maybe it was on another site)...So here goes. When I fire, instead of shooting the bb out with a high velocity like it should, the bb just drops out of the inner barrel. The blowback seems fine, its just that the bb's do not have enough force to propel them out of the inner barrel with some power. I tried turning the hop-up all the way down because i thought this may be stopping the bb's from going anywhere but the same thing still happens. Any ideas appreciated!

March 2nd, 2009, 21:31	#3
Qlong Division Trader rating Join Date: Jun 2007 Location: Scarborough, Ontario	Check parts #24 and #25. The head of the rocket valve should be pushed up against the pin (part #26) by the spring (part #25). __________________ Weee! Last edited by Qlong; March 2nd, 2009 at 21:35..

March 2nd, 2009, 22:04	#5
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Good chance a double feed too. One BB rips out and the other drops out. Or, your hop up rubber is FUBAR. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

March 2nd, 2009, 21:18	#2
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Probably has to do with the internal gas parts, and the valve inside the blowback unit. __________________ Airsoft Sales and Repair/Upgrade Services

March 2nd, 2009, 21:45	#4
Nick_273 Trader rating Join Date: Jan 2006 Location: Vancouver Island, BC	I replaced the rocket valve (part 24) with spare one that i had lying around and now it works fine. Its strange because the rocket valve i had in there before was metal too and wasn't broken or deformed. Thanks for the help guys.

KSC G19 bb's Dropping Out of barrel

Doctor's Corner