M14 assembley

rjorven · January 29th, 2009, 02:27

as it states in having problems assembling my m14. everything goes in great, but it wont line up at the trigger guard so the trigger guard wont go on hence i cant assemble.

ive had it apart a thousand times now and cannot see anything binding or out of the ordenary.

can someone please give me an answer as to what im doing wrong!

Erennert · January 29th, 2009, 02:29

Pictures could help, although I know nothing about internals, but others could help easier to identify the problem.

BORDENSNIPER · January 29th, 2009, 10:33

alright, before u do anything else, make sure u put in the right screws into the gearbox front. I accidentaly put a long screw which will prevent the trigger guard assembly from going into the gearbox.

also, after u checked that, depending on why its not going in (visually inspect it) u can bend the guard with ur hands to fit, since depending on the type of metal, when u yank it out it might have bent,

cheers.

please take a shot of ur grabox sides and fronts and il pin point the problem for u.

sushicake · January 29th, 2009, 12:14

Quote:

Originally Posted by rjorven

as it states in having problems assembling my m14. everything goes in great, but it wont line up at the trigger guard so the trigger guard wont go on hence i cant assemble.

ive had it apart a thousand times now and cannot see anything binding or out of the ordenary.

can someone please give me an answer as to what im doing wrong!

I've had that problem before, then I found out I didn't push the gear box all the way into the frame... Just give it a slight push and make sure the trigger guard lines up with the gear box. There should notches in the gear box as well as the frame, just make sure those two line up and you should be fine shoving the trigger guard in.

rjorven · January 29th, 2009, 12:28

well ive even tried "hammering" it in, i know bad move i was mad the gun didnt deserve it. and it still wont fit.

as for the screws illl have to check i know i added a lock washer onto the motor mount but it shouldnt have gotten in the way, ill remove it and try again.

Donster · January 29th, 2009, 12:29

AGM is an almost 100% Marui clone. Hope this helps!

http://www.mechbox.com/m14/m14-reassembly-agm.html

rjorven · January 29th, 2009, 18:38

i got it figured out. thanx everyone. baisically i was bieng lazy and trying to put my stock motor mount onto my upgraded gearbox (different brands) and everything would fit nicely but it would bind in the gun.

for reference it was only out of alignment by about 1/5 a mm. and it would not go. lets everyone know there isnt much tollerance for sloppyness.

Thanx to all that helped.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 29th, 2009, 02:27	#1
rjorven Banned From The Classifieds Trader rating Join Date: Aug 2007 Location: northern BC	M14 assembley as it states in having problems assembling my m14. everything goes in great, but it wont line up at the trigger guard so the trigger guard wont go on hence i cant assemble. ive had it apart a thousand times now and cannot see anything binding or out of the ordenary. can someone please give me an answer as to what im doing wrong!

January 29th, 2009, 10:33	#3
BORDENSNIPER Trader rating Join Date: Feb 2005	alright, before u do anything else, make sure u put in the right screws into the gearbox front. I accidentaly put a long screw which will prevent the trigger guard assembly from going into the gearbox. also, after u checked that, depending on why its not going in (visually inspect it) u can bend the guard with ur hands to fit, since depending on the type of metal, when u yank it out it might have bent, cheers. please take a shot of ur grabox sides and fronts and il pin point the problem for u.

January 29th, 2009, 12:28	#5
rjorven Banned From The Classifieds Trader rating Join Date: Aug 2007 Location: northern BC	well ive even tried "hammering" it in, i know bad move i was mad the gun didnt deserve it. and it still wont fit. as for the screws illl have to check i know i added a lock washer onto the motor mount but it shouldnt have gotten in the way, ill remove it and try again.

January 29th, 2009, 12:29	#6
Donster Trader rating Join Date: Jul 2007 Location: GTA	AGM is an almost 100% Marui clone. Hope this helps! http://www.mechbox.com/m14/m14-reassembly-agm.html

January 29th, 2009, 18:38	#7
rjorven Banned From The Classifieds Trader rating Join Date: Aug 2007 Location: northern BC	i got it figured out. thanx everyone. baisically i was bieng lazy and trying to put my stock motor mount onto my upgraded gearbox (different brands) and everything would fit nicely but it would bind in the gun. for reference it was only out of alignment by about 1/5 a mm. and it would not go. lets everyone know there isnt much tollerance for sloppyness. Thanx to all that helped.

M14 assembley

Doctor's Corner