Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

lipo problem

:

Doctor's Corner

Reply
 
Thread Tools
Old January 22nd, 2009, 21:33   #1
jesster202
 
jesster202's Avatar
 
Join Date: Dec 2007
Location: London Ontario
lipo problem

ok here's the problem im running my set up with two identical battery's and one prior to charging worked but needed charging the outher didnt even pull but the mortor was trying to work. I charged the one with jucie left and it did a full cycle in a half hour i plugged the outher in and 45 mins in was still charging so i dissconnected it and tryed it and nothing to even working still making the motor try to fire i pulled the working one in and the gun is fine so im pissed! any suggestions
__________________
MY COLLECTION
AEG
M4 coustom full metal with king arms metal body //\\ Galaxy MP5 PDW
GAS/SPRING

KJW M9 FULLY UPGRADED //\\KWA FULL SIZE USP //\\ TF MAC11
GEAR
Coyote Brown CIRAS
jesster202 is offline   Reply With Quote
Old January 22nd, 2009, 22:08   #2
rustysniper
 
rustysniper's Avatar
 
Join Date: Apr 2008
Location: Canal Flats BC
Have you balanced the cells?
rustysniper is offline   Reply With Quote
Old January 22nd, 2009, 22:16   #3
Qlong
Division
 
Qlong's Avatar
 
Join Date: Jun 2007
Location: Scarborough, Ontario
Try letting the batteries fully charge before putting it in your gun.

Quote:
Originally Posted by rustysniper View Post
Have you balanced the cells?
The only way to charge Lipos is to balance charge them
__________________

Weee!
Qlong is offline   Reply With Quote
Old January 22nd, 2009, 22:33   #4
jesster202
 
jesster202's Avatar
 
Join Date: Dec 2007
Location: London Ontario
using a ballence charger as stated the first battery did fine the sconed keeps going and one cell gets luke warm whitch is a no no i know of and dosnt even get a little charge form being in the charger for 40 mins
__________________
MY COLLECTION
AEG
M4 coustom full metal with king arms metal body //\\ Galaxy MP5 PDW
GAS/SPRING

KJW M9 FULLY UPGRADED //\\KWA FULL SIZE USP //\\ TF MAC11
GEAR
Coyote Brown CIRAS
jesster202 is offline   Reply With Quote
Old January 22nd, 2009, 22:46   #5
georgehutchison
 
georgehutchison's Avatar
 
Join Date: Apr 2008
Location: Barrie Ont
have you checked the voltage on the pack? Once the voltage on a lipo gets to low the effects are irreversable. remember to allways unplug your batt when done playing and never run them down to low. if only one cell is warming up it sounds like the voltage in that cell is to low and will not accept a charge.. there is no way to fix unlike nicd or nimh. you can check each cells voltage by using the balancing lead and test each colors wire with the black as ground( -) hope this helps. if the batt is garbage please dont throw it in the trash there are many batt stores that can dispose of it for free safely.
__________________
Barrie Area Age Verifier
Barrie Area Gun Doctor
georgehutchison is offline   Reply With Quote
Old January 22nd, 2009, 22:58   #6
jesster202
 
jesster202's Avatar
 
Join Date: Dec 2007
Location: London Ontario
problay is trash i got it this way anyways at least i have one that works great though i know because my last one i charged didnt even get hot at all this one got luke warm whitch i know form outhers saying is just not right i guess im going to bestbuy tomorow after to dispose of it
__________________
MY COLLECTION
AEG
M4 coustom full metal with king arms metal body //\\ Galaxy MP5 PDW
GAS/SPRING

KJW M9 FULLY UPGRADED //\\KWA FULL SIZE USP //\\ TF MAC11
GEAR
Coyote Brown CIRAS
jesster202 is offline   Reply With Quote
Old January 22nd, 2009, 23:56   #7
huang
 
Join Date: Dec 2001
Location: Scarborough
Get a balancer, cheap
huang is offline   Reply With Quote
Old January 26th, 2009, 20:56   #8
jesster202
 
jesster202's Avatar
 
Join Date: Dec 2007
Location: London Ontario
allredy have a ballence charger the batter is facked i cheked the indvidual cells and they are below the 3.4 volt level and form a little bit of reserch they become chemicly imballenced i guess and are no longer usable hence why it was heatting up when charging and the outher on wasnt.
__________________
MY COLLECTION
AEG
M4 coustom full metal with king arms metal body //\\ Galaxy MP5 PDW
GAS/SPRING

KJW M9 FULLY UPGRADED //\\KWA FULL SIZE USP //\\ TF MAC11
GEAR
Coyote Brown CIRAS
jesster202 is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 08:16.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.