|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
May 28th, 2008, 19:44 | #1 |
charging batteries with deans clips?
hey guys, i recently recieved a CA m15 SPR in a trade, and it came with a battery with deans clips, just wondering what i have to buy to charge my battery
also, when fireing this afternoon, about 3 bb's got stuck in the chamber/hopup, and now the gearbox wont move, any suggestions
__________________
Signature images can not exceed 510 x 100 pixels. See this thread for more details: http://www.airsoftcanada.com/showthread.php?t=53249 |
|
May 28th, 2008, 19:51 | #2 |
Get a deans charger adapter. Is it that hard to figure out?
As for the jam.....do you have an unjamming rod? If not maybe you need to take it to a gun doctor if you don't know what you're doing. |
|
May 28th, 2008, 20:06 | #3 |
yeah i got the bb's out with the unjamming rod, but now the gearbox is seized, and i'm not sure if its because the battery needs to be charged
__________________
Signature images can not exceed 510 x 100 pixels. See this thread for more details: http://www.airsoftcanada.com/showthread.php?t=53249 |
|
May 28th, 2008, 21:09 | #4 |
Official ASC Bladesmith
|
Good chance. If your motor torques a bit, rather like a click every time you pull the trigger, then your battery is most likely dead if you haven't charged it.
|
May 28th, 2008, 22:37 | #5 |
Prancercise Guru
|
Some bigger hobby shops will have a Deans plug with a pigtail already soldered on if you're not in the mood to do it.
|
May 29th, 2008, 00:17 | #6 |
I can make you one for 10$ + shipping.
|
|
May 29th, 2008, 02:47 | #7 |
ok koksmos, i'll take one
and yeah, my motor turns fine when its not attatched to the gearbox, but when i attatch it, i get a click
__________________
Signature images can not exceed 510 x 100 pixels. See this thread for more details: http://www.airsoftcanada.com/showthread.php?t=53249 |
|
|
Bookmarks |
|
|