|
|
May 7th, 2008, 04:24
|
#106 | |
|
yea i did. my brother is an american teenager, what else can i say?
im glad somebody else agrees with me that its a dumb idea cuz nobody around here listens to me. i couldnt make him not do it so i felt better about my decision to be there and do it instead of him so he would not be out doing it by himself and get hurt another thing for people who think poorly of the ika zuchi. you might feel a little differently about it once you get it in your hands. this thing is amazingly comfortable to hold. think m4 that feels like a p90
__________________
 Quote:
Last edited by Dusti69; May 7th, 2008 at 04:33.. |
|
|
|
|
May 7th, 2008, 11:15
|
#107 | |
|
Quote:
+1 That exactly my 1st impression!! Feel like a p90 with comfort!! I did not make a chrono on it... but sure it around 350fps!! This baby with the supressor give you more auccuracy!
__________________
ALPHA unit, because there is no one else for that job! |
|
|
|
|
|
May 7th, 2008, 16:42
|
#108 |
|
Apparently you can buy any M4 grip and change it, since it is based off an M4...
Get one that is ambi, or a lefty one. I want one... I have M4s, but now this is a reason to get one... and use some AR mags... Also, it would be nice if that stock was able to be modded to fit a crane stock in it... a lot more battery space!! From the look, a bit of hacking would do the trick. *edit* I HATE M4s.... my bad Last edited by Kos-Mos; May 8th, 2008 at 22:35.. |
|
|
|
|
May 7th, 2008, 21:04
|
#109 | |
|
Quote:
__________________
|
|
|
|
|
|
May 9th, 2008, 23:11
|
#110 | |
|
|
anyone know if this king arms m16 grip would fit on the ika zuchi m4?
 it appears to be ambidextrous like this armalite m4 grip that i dont like as much 
__________________
Quote:
|
|
|
|
|
|
May 9th, 2008, 23:13
|
#111 |
|
Red Wine & Adderall
|
Nope it sure wont. A little modding and it might.
__________________
 "Its only a little bit on fire" |
|
|
|
|
May 9th, 2008, 23:33
|
#112 | |
|
|
i guess im just gonna have to keep searching ebay over time to find something that fits. i love the grip it came with, its just not left handed
__________________
Quote:
|
|
|
|
|
|
May 9th, 2008, 23:39
|
#113 |
|
Red Wine & Adderall
|
You wont find anything that will that has any type of back piece that covers the back end of the lower. The design of the rear of the upper prevents that.
Your best bet is to select something that has no back piece that goes on the lower. Something like this. Except this is a right hand grip. http://www.airsoftparts.ca/store2/in...roducts_id=405 However with slight modding to the upper or to the grip itself it should be able to fit.
__________________
"Its only a little bit on fire" |
|
|
|
|
May 10th, 2008, 00:12
|
#114 | |
|
|
and thats the exact style of grip mine came with. plus i dont feel like paying that much for one
i was thinking about going so far as to just file/sand down the thumb rest a little to make it not get in the way so much dont worry ill eventually find one or mod the one i have. thanks for the help though, you at least saved me the little bit of money for something that might not fit
__________________
Quote:
|
|
|
|
|
|
May 10th, 2008, 12:18
|
#115 |
|
|
Almost any grip will fit, you just won't be able to add the little palm rest at the bottom of it.
And, you might have to hack a little bit of the Poseidon body in order to fit some grips (like the KA one you shown). I have worked on an M4 this week, with the Magpul grip... awesome feel to it. |
|
|
|
|
May 10th, 2008, 19:10
|
#116 | |
|
|
isnt the thing at the bottom of the grip what holds the motor on the gearbox? i started unscrewing the screws to see how well itd come off and the motor started pushing the plate off so i put it back on and didnt mess wit hit anymore. i had to really push that plate in hard to get the screw into the threads. if thats what you meant
also the posiedon body doesnt come anywhere near the grip so i dont think any of that would have to be modded. if it did id rather take a chunk out of the grip itself to make it fit i think ambidextrous hand grips should be standard on guns
__________________
Quote:
|
|
|
|
|
|
May 16th, 2008, 07:39
|
#117 | |
|
|
i filed the thumbrest down a good bit. still sticks out into my hand but not nearly as much. more fun than payin money for another grip
came accross this on ehobby. made me think of this thread. at first i thought like whoa cool but then i looked at it longer and was like ....the hell? it just looks like a mess  http://cgi.ebay.com/EAC-P90-RAS-CUST...QQcmdZViewItem
__________________
Quote:
|
|
|
|
|
|
May 16th, 2008, 18:15
|
#118 |
|
Official ASC "Dumb Ass"
|
that gun is 100% FAIL
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
