OZ-14 Conversion - Need Advice

LoricTheMad · December 28th, 2007, 00:39

I've been looking at my friend's Marui AKS and wondering what sort of work would be required to convert it into an OZ-14 Groza Spetznaz. The carrying handle could be easily fabricated, but the problem that both of us are looking at is how to convert an airsoft AK to a bullpup configuration.

If anyone has any suggestions or ideas, I'd appreciate it, if someone has done a conversion, post some pictures or plans if such a thing exists please, and if anyone thinks it's impossible then let me know.

Thanks,

ancorp · December 28th, 2007, 00:45

I take it you mean OC-14 not OZ.

The TM AK is not a good base. You will have to replace pretty much everything. An AKS-74U is the best base IMO, since it has the short rear sight block, and the stamped receiver, and the plastic pistolgrip. You will have to hide the motor, it will stick out, and you will need to find a way to creatively cover it up without ruining the look. Same goes for the trigger, plus you will have to find a way to run a rod to it so the new trigger will activate it. Perhaps relocate the gearbox switch assembly.

This project would require quite a bit of work, kudos to you if you can pull it off.

Mr Jon · December 28th, 2007, 00:47

Making an Groza OC14 is gonna be a bit difficult, but perhaps if you some how by some impossible chance come by the Smokeys AK bullpup kit you could get a good start on that project.

http://www.wgcshop.com/pcart/shopper...0_srch_bullpup

LoricTheMad · December 28th, 2007, 00:53

I wasn't expecting replies so soon. The impetus for this project is the fact that the folding stock on his AKS is coming off on the one side. It's a pretty easy fix if he can get the parts, but it does leave the option open to tinker and toy around.

Do you by chance have any pictures of that bullpup kit installed on an AEG?

skalnok · December 28th, 2007, 01:02

i think a company is coming out with one in 2008, but dont quote me on this i could be wrong

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 28th, 2007, 00:39	#1
LoricTheMad Trader rating Join Date: Oct 2007 Location: London, ON	OZ-14 Conversion - Need Advice I've been looking at my friend's Marui AKS and wondering what sort of work would be required to convert it into an OZ-14 Groza Spetznaz. The carrying handle could be easily fabricated, but the problem that both of us are looking at is how to convert an airsoft AK to a bullpup configuration. If anyone has any suggestions or ideas, I'd appreciate it, if someone has done a conversion, post some pictures or plans if such a thing exists please, and if anyone thinks it's impossible then let me know. Thanks, __________________ "Void where prohibited. Prohibited where void. Void and prohibited where not allowed."

December 28th, 2007, 00:45	#2
ancorp AK Guru Trader rating Join Date: Mar 2005 Location: Vaughan, Ontario (near Toronto)	I take it you mean OC-14 not OZ. The TM AK is not a good base. You will have to replace pretty much everything. An AKS-74U is the best base IMO, since it has the short rear sight block, and the stamped receiver, and the plastic pistolgrip. You will have to hide the motor, it will stick out, and you will need to find a way to creatively cover it up without ruining the look. Same goes for the trigger, plus you will have to find a way to run a rod to it so the new trigger will activate it. Perhaps relocate the gearbox switch assembly. This project would require quite a bit of work, kudos to you if you can pull it off. __________________

December 28th, 2007, 00:47	#3
Mr Jon Trailer Park Supervisor Trader rating Join Date: Jul 2003 Location: Winnipeg MB	Making an Groza OC14 is gonna be a bit difficult, but perhaps if you some how by some impossible chance come by the Smokeys AK bullpup kit you could get a good start on that project. http://www.wgcshop.com/pcart/shopper...0_srch_bullpup __________________

December 28th, 2007, 00:53	#4
LoricTheMad Trader rating Join Date: Oct 2007 Location: London, ON	I wasn't expecting replies so soon. The impetus for this project is the fact that the folding stock on his AKS is coming off on the one side. It's a pretty easy fix if he can get the parts, but it does leave the option open to tinker and toy around. Do you by chance have any pictures of that bullpup kit installed on an AEG? __________________ "Void where prohibited. Prohibited where void. Void and prohibited where not allowed."

OZ-14 Conversion - Need Advice

Airsoft Guns Discussion