|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
April 19th, 2007, 12:27 | #1 |
How to Make the Cheapest Silencer Ever
alright. i know i know, it doesnt actually make it quieter, but it does look cool. wat you do is before you throw out your crappy clearsofts, take the barrel and other useful components, then take some tubing, I used a model rocket body tube, and my friend used PVC. and wat we did to fit the barrel in the big tube was just wrap tape around it until it requires alot of force to get in, and stays in. if the barrel is to small for the hole it goes in, just wrap more tape around it until its snug and it doesnt wobble, i found that using a 7mm brake fluid barrel works best.
|
|
April 19th, 2007, 13:59 | #2 |
Another way is to use a PVC pipe and cut it to size.
Put end caps on and drill a hole so it fits down the shaft of your barrel. At the other end drill a hole big enough that it screws in to the threads of your barrel. paint and it looks nnice and is light. |
|
|
Bookmarks |
|
|