AEG fuses quetion

Spa · April 16th, 2007, 01:26

Whats the recommended fuse for a 8.4v and a 9.6v battery? (large)

ILLusion · April 16th, 2007, 02:05

That depends more on your spring, your gears and your motor.

But stock is 15A.

I run some setups using a 9.6v battery with a 15A fuse, still. I've only popped a 15A fuse once, and that was with a 480fps gearbox.

Spa · April 16th, 2007, 02:09

torque up gears M120 or M100, and stock motor

ILLusion · April 16th, 2007, 02:10

Just keep it at stock 15A. If it pops, then move up in 5A increments till it stops popping.

But if it's popping with that setup, you should look at your shimming job. It could be a bit too tight.

Spa · April 16th, 2007, 03:42

hmm, i jsut did the shims and they move perfectly. they dont jump and when i spin them they spin with no friction at all.

ILLusion · April 16th, 2007, 04:59

Then move up to a 20A fuse. It's not a bad thing to do... but it just means that the higher the current draw, the less efficient the system is.

Spa · April 16th, 2007, 13:58

deal, thankx illusion

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 16th, 2007, 01:26	#1
Spa Trader rating Join Date: Oct 2006 Location: Winnipeg, Manitoba	AEG fuses quetion Whats the recommended fuse for a 8.4v and a 9.6v battery? (large)

April 16th, 2007, 02:05	#2
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	That depends more on your spring, your gears and your motor. But stock is 15A. I run some setups using a 9.6v battery with a 15A fuse, still. I've only popped a 15A fuse once, and that was with a 480fps gearbox. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

April 16th, 2007, 02:10	#4
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	Just keep it at stock 15A. If it pops, then move up in 5A increments till it stops popping. But if it's popping with that setup, you should look at your shimming job. It could be a bit too tight. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

April 16th, 2007, 02:09	#3
Spa Trader rating Join Date: Oct 2006 Location: Winnipeg, Manitoba	torque up gears M120 or M100, and stock motor

April 16th, 2007, 03:42	#5
Spa Trader rating Join Date: Oct 2006 Location: Winnipeg, Manitoba	hmm, i jsut did the shims and they move perfectly. they dont jump and when i spin them they spin with no friction at all.

April 16th, 2007, 04:59	#6
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	Then move up to a 20A fuse. It's not a bad thing to do... but it just means that the higher the current draw, the less efficient the system is. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

April 16th, 2007, 13:58	#7
Spa Trader rating Join Date: Oct 2006 Location: Winnipeg, Manitoba	deal, thankx illusion

AEG fuses quetion

Doctor's Corner