Version 3 gearbox for TM guns fit all types?

Pedro888 · August 18th, 2006, 23:07

Hi,

I have a TM G36C and I am looking to buy a complete V3 gearbox from an AK47S. Aside from being wired in the back instead of the front for the G36C is everything else the same??? I'm not sure just cause of the difference in motors (EG700 for AK VS EG1000 for G)

I would like to make sure before I buy that it can fit.

Thanks in advance for your help! :salute:

mcguyver · August 18th, 2006, 23:17

Nozzle is different as well as the selector plate. Cylinder may be different as well, but I have to see it to tell you for sure. It won't fit at all without you changing the selector, nozzle and rewiring the gun. Parts alone will cost you proably $50, and that's if you can find a G36 selector. Then you'd need to do a complete teardown or the mechbox to even chage those parts.

As you've asked this question, you don't know your way around a mechbox and I wouldn't try learning on a ver 3 if I were you. They have a few tricks in store for you.

vondnik · August 19th, 2006, 00:59

trigger, nozzle, selector plate, tappet plate, selector hardware and wireing will all be different

shell, motor, motor cage and most of the internals will be the same.

Finding the selector hardware will be the hardest thing

Darklen · September 8th, 2006, 22:41

Ok, similar question, am I correct in assuming all version 3 gearbox shells are interchangable?

The reason I'm asking is I have a player with an AUG with a cracked box, right around the cylinder head. Most of the HK shops I've looked at list whatever V3 gearbox shell they sell as fitting G36, AK and SIG, but mysteriously leave the AUG off the list. Is it just that AUG's are kind rare or do they need a different V3 gearbox?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 18th, 2006, 23:07	#1
Pedro888 Trader rating Join Date: Nov 2005 Location: Sherbrooke, Quebec	Version 3 gearbox for TM guns fit all types? Hi, I have a TM G36C and I am looking to buy a complete V3 gearbox from an AK47S. Aside from being wired in the back instead of the front for the G36C is everything else the same??? I'm not sure just cause of the difference in motors (EG700 for AK VS EG1000 for G) I would like to make sure before I buy that it can fit. Thanks in advance for your help! :salute: __________________ PeDrO 1st Pathfinders Regiment ''Don't go to Bagdad unless you wanna bang!''

August 18th, 2006, 23:17	#2
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	Nozzle is different as well as the selector plate. Cylinder may be different as well, but I have to see it to tell you for sure. It won't fit at all without you changing the selector, nozzle and rewiring the gun. Parts alone will cost you proably $50, and that's if you can find a G36 selector. Then you'd need to do a complete teardown or the mechbox to even chage those parts. As you've asked this question, you don't know your way around a mechbox and I wouldn't try learning on a ver 3 if I were you. They have a few tricks in store for you. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

August 19th, 2006, 00:59	#3
vondnik Ban-Fu Sifu Trader rating Join Date: Nov 2002 Location: Socialist republic of Kebekistan	trigger, nozzle, selector plate, tappet plate, selector hardware and wireing will all be different shell, motor, motor cage and most of the internals will be the same. Finding the selector hardware will be the hardest thing __________________ Vondnik, team Bad Karma, PQAC Murphy's second rule: Nothing is impossible for the man who does not have to do it himself.

September 8th, 2006, 22:41	#4
Darklen Administrator Trader rating Join Date: Jan 2004 Location: Red Deer, AB	Ok, similar question, am I correct in assuming all version 3 gearbox *shells* are interchangable? The reason I'm asking is I have a player with an AUG with a cracked box, right around the cylinder head. Most of the HK shops I've looked at list whatever V3 gearbox shell they sell as fitting G36, AK and SIG, but mysteriously leave the AUG off the list. Is it just that AUG's are kind rare or do they need a different V3 gearbox? __________________ *ASC Age Verifier for Red Deer & Area Alberta*

Version 3 gearbox for TM guns fit all types?

Airsoft Guns Discussion