|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 10th, 2006, 12:50
|
#1 |
|
Which parts to lube to prevent double feeding?
Hi,
I've had my glock 34 for about 3 months now and I haven't done at maintenance on it. Now, the gun is double-feeding bb's every 10 or so shots. Which parts should I clean and lube to stop this problem? Thanks Cuppo |
|
|
|
|
June 10th, 2006, 13:14
|
#2 |
|
Everything.
Strip it right down and clean every little bit. You should do this after ever game or at least once in awhile. I used to do it once a week just for something to do. Hanging upside down reciting O Canada backwards while blind folded. |
|
|
|
|
|
June 10th, 2006, 15:46
|
#3 |
|
Official ASC Bladesmith
|
Every moving part needs lube. GBBs are pigs for lube because of all the moving parts. And yes, to lube all the parts you need to take the slide off and break it down into it's major components. No, doens't mean you need to take each & every peice out to lube it, just the major components, slide, blow back assembly, guts inside the frame, etc. Apply oil, work the parts back & forth to let the oil seem in properly.
|
|
|
|
|
June 10th, 2006, 16:07
|
#4 |
|
Alright I'll try that.
Just to clarify: I would never actually need a screwdriver to access any of the parts would I? I stripped down by blow-back assembly into it's nuts and bolts cause I needed to replace my rocket valve. Now, for maintenance, I wouldn't strip it that far down right? |
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
