g36c tm - not firing

deep in the bush · June 9th, 2006, 23:42

hey ya all...upgraded...does not fire now...trigger returns fine, but clicks and no fire.... just tried with newer battery and blew fuse... any ideas.. i checked the gearing looks fine... also before it would shoot double looked like the sector gear was not lined up..that is fixed..now it does not do a darn thing..just clicks when i pull tirgger like it is not getting power right.

am i looking in right direction?

any suggestions would help

ditb

Mantelope · June 9th, 2006, 23:48

90% you put the battery in backwards. 10% you messed something up in the mechbox making it too tight or too hard to cycle. Define "upgraded."

deep in the bush · June 10th, 2006, 00:04

i thought the same about battery...checked all connections... upgraded bushings, spring and gearbox all to specs as was given to me... i also checked al shims..seemed fine..set the sector gear right..made sure it turned ok.. but fuse is still getting blown..could it be a connection issue in box?

deep in the bush · June 10th, 2006, 01:32

the damn bbs are giving me no velocity ...i cleaned the barrel to get rid of any goo from the rebuild just incase it blew grease into the barrel... sounds like it is firing fine..just no velocity...ideas?

deep in the bush · June 10th, 2006, 02:10

from the mechbox i am getting air out through the nozzel but not sure if it enough to give me velocity...any help there? how much air should i be feeling when i dry fire it? ( i know not to do it alot...just tried 2x)

ditb

mcguyver · June 10th, 2006, 02:16

Cylinder installed with hole towards the rear of the mechbox?

Lerch · June 10th, 2006, 02:17

Start from basics...make sure the battery is charged, try in full auto...check the internals, try in full auto...etc..

deep in the bush · June 10th, 2006, 02:24

fresh battery... same in full auto... cylinder is in with hole toward rear...hmmm...
cleaned barrel too...turned hop up down

any thing i am missing?

thanks tons

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 9th, 2006, 23:42	#1
deep in the bush Monkey with a Gun Trader rating Join Date: Jul 2005 Location: Barrie	g36c tm - not firing hey ya all...upgraded...does not fire now...trigger returns fine, but clicks and no fire.... just tried with newer battery and blew fuse... any ideas.. i checked the gearing looks fine... also before it would shoot double looked like the sector gear was not lined up..that is fixed..now it does not do a darn thing..just clicks when i pull tirgger like it is not getting power right. am i looking in right direction? any suggestions would help ditb __________________ "Anyone who has the power to make you believe absurdities has the power to make you commit injustices." Voltaire AV for Barrie, Orillia, Innisfil, Bradford Region - pm me if you need AV'd I'm the Barrie Bastard. http://www.bbbastard.com/ Cheese is good.

June 10th, 2006, 00:04	#3
deep in the bush Monkey with a Gun Trader rating Join Date: Jul 2005 Location: Barrie	hmmm i thought the same about battery...checked all connections... upgraded bushings, spring and gearbox all to specs as was given to me... i also checked al shims..seemed fine..set the sector gear right..made sure it turned ok.. but fuse is still getting blown..could it be a connection issue in box? __________________ "Anyone who has the power to make you believe absurdities has the power to make you commit injustices." Voltaire AV for Barrie, Orillia, Innisfil, Bradford Region - pm me if you need AV'd I'm the Barrie Bastard. http://www.bbbastard.com/ Cheese is good.

June 10th, 2006, 01:32	#4
deep in the bush Monkey with a Gun Trader rating Join Date: Jul 2005 Location: Barrie	ok..fixed power issue but the damn bbs are giving me no velocity ...i cleaned the barrel to get rid of any goo from the rebuild just incase it blew grease into the barrel... sounds like it is firing fine..just no velocity...ideas? __________________ "Anyone who has the power to make you believe absurdities has the power to make you commit injustices." Voltaire AV for Barrie, Orillia, Innisfil, Bradford Region - pm me if you need AV'd I'm the Barrie Bastard. http://www.bbbastard.com/ Cheese is good.

June 9th, 2006, 23:48	#2
Mantelope Scotty aka harleyb Trader rating Join Date: Mar 2004 Location: Toronto, Ontario	90% you put the battery in backwards. 10% you messed something up in the mechbox making it too tight or too hard to cycle. Define "upgraded."

June 10th, 2006, 02:10	#5
deep in the bush Monkey with a Gun Trader rating Join Date: Jul 2005 Location: Barrie	checked for air from the mechbox i am getting air out through the nozzel but not sure if it enough to give me velocity...any help there? how much air should i be feeling when i dry fire it? ( i know not to do it alot...just tried 2x) ditb __________________ "Anyone who has the power to make you believe absurdities has the power to make you commit injustices." Voltaire AV for Barrie, Orillia, Innisfil, Bradford Region - pm me if you need AV'd I'm the Barrie Bastard. http://www.bbbastard.com/ Cheese is good.

June 10th, 2006, 02:16	#6
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	Cylinder installed with hole towards the rear of the mechbox? __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

June 10th, 2006, 02:17	#7
Lerch * AV Status REVOKED * Trader rating Join Date: Feb 2003 Location: CFB Shilo, MB	Start from basics...make sure the battery is charged, try in full auto...check the internals, try in full auto...etc.. __________________

June 10th, 2006, 02:24	#8
deep in the bush Monkey with a Gun Trader rating Join Date: Jul 2005 Location: Barrie	fresh battery... same in full auto... cylinder is in with hole toward rear...hmmm... cleaned barrel too...turned hop up down any thing i am missing? thanks tons __________________ "Anyone who has the power to make you believe absurdities has the power to make you commit injustices." Voltaire AV for Barrie, Orillia, Innisfil, Bradford Region - pm me if you need AV'd I'm the Barrie Bastard. http://www.bbbastard.com/ Cheese is good.

g36c tm - not firing

Doctor's Corner