TM G17 cycling issues

[MrJReyez]

Hey guys, I am having some trouble with my G17. I have a PGC slide on it. I upgraded the recoil spring, seer torsion, hammer spring, trigger bar spring.

First of all, the gun would shoot fine, but after the shot, the next BB gets fed into the chamber, but the gun would not be cocked. I have to cock it again manually.

Second of all, after manually cocking the gun and shooting it a few rounds, it does the little *pouf* like if the hammer didnt hit the valve hard enough to let the gas out. The mags are still filled though.

Anybody could help me for that matter?

Chen~

[RainyEyes]

Probably fitment issues with the slide and frame.

Make sure to lube the rails and check for friction. The slide shouldn't wobble but it shouldn't be so tight you feel the slide grinding when pulling it back.

[MrJReyez]

Originally Posted by RainyEyes

Probably fitment issues with the slide and frame.

Make sure to lube the rails and check for friction. The slide shouldn't wobble but it shouldn't be so tight you feel the slide grinding when pulling it back.

Thanks for the quick reply~ i'll sand it a little bit and see if theres still some issue.

Cheers!

Sent from my MIX 2S using Tapatalk

[BioRage]

Originally Posted by MrJReyez

I upgraded the recoil spring, seer torsion, hammer spring, trigger bar spring.

Why did you upgrade those?

[RainyEyes]

Originally Posted by MrJReyez

Thanks for the quick reply~ i'll sand it a little bit and see if theres still some issue.

Cheers!

Sent from my MIX 2S using Tapatalk

I mean if you messed with a bunch of other parts it could easily be those as well. I'm not saying file it down right away im saying check first and see if that's the root of the problem. If not revert back to stock parts until the problem subsists and keep looking if that doesn't solve the problem.

My suggestion was under the impression all the other parts were drop-in without fitment issues.