How to Mount M4 Grip to CYMA EBR M14

slabo74 · March 16th, 2019, 17:35

Hi Everyone,

My son has been getting into airsoft a lot lately and wanted to pick up a "project" gun to fix it up and learn more about how they work. He bought a CYMA EBR M14 that needed a bit of work, and so far we've got it mostly fixed up.

It was missing the grip, however, which should be easy enough to fix, although we're actually scratching our heads a bit on this part. He picked up a new M4 grip for it, but we didn't realize the mounting bracket on the gun is completely missing as well. Either I don't know what to call it, or it's a hard to find part, because we can't seem to find anything to connect this grip (or any grip for that matter) to the gun. The screw holes all seem intact, though.

I figure it's going to look like something on this video 50 seconds in, but this gun doesn't house the motor in the grip: https://youtu.be/YsOIrECK_eE?t=50

Any thoughts here? Are we going to have to get a mounting bracket machined? Appreciate any help you can give, thanks.

Danke · March 17th, 2019, 12:23

Look like you just need a real M4 pistol grip & bolt for that since the motor isn't in the grip.

But there should be a wedge shaped stub to bolt it to on the stock assembly. If that's been broken or ground off the project got more expensive.

slabo74 · March 17th, 2019, 12:47

That's exactly the problem, the wedge shaped stub is missing. I don't know the reason it was removed, but it looks like it was done cleanly, so if I can just find that replacement part we should be in business.

It's either that or find another way to mount a grip to the stock.

cetane · March 17th, 2019, 13:48

Pictures.... pictures say more than your words can ever say.

slabo74 · March 17th, 2019, 19:56

Good idea, should have thought of it. Couple of pictures here:

https://i.imgur.com/sKZsthg.jpg
https://i.imgur.com/1x9yPPU.jpg

Danke · March 17th, 2019, 21:56

You just need a real M4 grip and bolt.

slabo74 · March 18th, 2019, 21:02

That's great, and thanks for the suggestion. We'll dig one up and try it out. I'll report back to let you know how we made out.

IkarosCORE · March 18th, 2019, 21:20

You're going to need that little wedge piece to properly mount the grip. Unfortunately I have no clue as to where you'd be able to find one.

slabo74 · April 7th, 2019, 00:06

As we've been looking at this more closely, I agree that we're going to need that wedge. Might see if I can get something machined...

Danke · April 7th, 2019, 15:22

This is the original part.

https://airsoft.tiger111hk.com/m60/C...duct_info.html

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 16th, 2019, 17:35	#1
slabo74 Trader rating Join Date: Mar 2019	How to Mount M4 Grip to CYMA EBR M14 Hi Everyone, My son has been getting into airsoft a lot lately and wanted to pick up a "project" gun to fix it up and learn more about how they work. He bought a CYMA EBR M14 that needed a bit of work, and so far we've got it mostly fixed up. It was missing the grip, however, which should be easy enough to fix, although we're actually scratching our heads a bit on this part. He picked up a new M4 grip for it, but we didn't realize the mounting bracket on the gun is completely missing as well. Either I don't know what to call it, or it's a hard to find part, because we can't seem to find anything to connect this grip (or any grip for that matter) to the gun. The screw holes all seem intact, though. I figure it's going to look like something on this video 50 seconds in, but this gun doesn't house the motor in the grip: https://youtu.be/YsOIrECK_eE?t=50 Any thoughts here? Are we going to have to get a mounting bracket machined? Appreciate any help you can give, thanks.

March 17th, 2019, 12:23	#2
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	Look like you just need a real M4 pistol grip & bolt for that since the motor isn't in the grip. But there should be a wedge shaped stub to bolt it to on the stock assembly. If that's been broken or ground off the project got more expensive. __________________ Airsoft, where nothing is hurt but feelings. Last edited by Danke; March 17th, 2019 at 12:28..

March 17th, 2019, 13:48	#4
cetane Trader rating Join Date: Jun 2010 Location: Markham & Stouffville - Ontario - Canada	Pictures.... pictures say more than your words can ever say. __________________ Looking to get age verified in York region? Click link...

March 17th, 2019, 12:47	#3
slabo74 Trader rating Join Date: Mar 2019	That's exactly the problem, the wedge shaped stub is missing. I don't know the reason it was removed, but it looks like it was done cleanly, so if I can just find that replacement part we should be in business. It's either that or find another way to mount a grip to the stock.

March 17th, 2019, 19:56	#5
slabo74 Trader rating Join Date: Mar 2019	Good idea, should have thought of it. Couple of pictures here: https://i.imgur.com/sKZsthg.jpg https://i.imgur.com/1x9yPPU.jpg

March 17th, 2019, 21:56	#6
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	You just need a real M4 grip and bolt. __________________ Airsoft, where nothing is hurt but feelings.

March 18th, 2019, 21:02	#7
slabo74 Trader rating Join Date: Mar 2019	That's great, and thanks for the suggestion. We'll dig one up and try it out. I'll report back to let you know how we made out.

March 18th, 2019, 21:20	#8
IkarosCORE Trader rating Join Date: Jan 2015 Location: Calgary AB	You're going to need that little wedge piece to properly mount the grip. Unfortunately I have no clue as to where you'd be able to find one.

April 7th, 2019, 00:06	#9
slabo74 Trader rating Join Date: Mar 2019	As we've been looking at this more closely, I agree that we're going to need that wedge. Might see if I can get something machined...

April 7th, 2019, 15:22	#10
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	This is the original part. https://airsoft.tiger111hk.com/m60/C...duct_info.html __________________ Airsoft, where nothing is hurt but feelings.

How to Mount M4 Grip to CYMA EBR M14

Accessories Discussion