Gun Just Not Right

[zReaperAssassin]

So I’ve tried everything. I am trying to do my teammates rifle for him. It is an Echo 1 XCR-C. I just replaced the shell with a Lonex Shell due to the original not being milled correctly. However, this is everything I’ve done and I am at a stand still. What would you guys suggest is wrong? I can easily hear something isn’t right. If you need a parts list I can provide one.

•Check pinion to bevel height with half shell off
•Shimmed Pinion to Bevel so it can easily turn and not much vertical movement
•Shimmed other gears normally, then shimmed each gear together
•Gears doin freely in gearbox, just as any of my other guns
•Piston moves freely in gearbox when screwed together

https://imgur.com/6R1Y6n2
https://www.dropbox.com/s/qbeud8tt0v...rsoft.mp4?dl=0

[ThunderCactus]

What's it doing?
Noisy? Or drawing too much current?

[zReaperAssassin]

Originally Posted by ThunderCactus

What's it doing?
Noisy? Or drawing too much current?

It seems to have a slight whine to it and it is drawing the current as shown in the picture. It is 99A Max Peak and I think 62A on Semi. Some are saying it sounds perfectly fine, so I'm confused lol

[ThunderCactus]

Did you run both the motor wires down the back of the grip?
What gears and what motor?
Are the motor leads arcing to the baseplate of the grip?

[zReaperAssassin]

Originally Posted by ThunderCactus

Did you run both the motor wires down the back of the grip?
What gears and what motor?
Are the motor leads arcing to the baseplate of the grip?

It seems people are saying it sounds fine and everything, it may just be me. Motor wires are run where they normally should be. SHS 13:1 Gears and SHS HT motor. Baseplate of the grip is plastic, so no racing going on.