MP5 Style grip for XCR?

Sputmilk · May 18th, 2015, 02:23

I picked up a VFC x Socom Gear Robinson Armament XCR: https://triggerairsoft.com/shop/imag...nson%20xcr.jpg.

I'm trying to make it look like a rifle from a videogame, as seen here:
http://i.imgur.com/0QKuKTZ.jpg

All I need to make it look just right is a bit of painting and stuff like that, but I'm having trouble finding something like that MP5 style grip.

Does anybody have any suggestions? I suppose I could make my own, but I have no clue how to go about doing that.

lurkingknight · May 19th, 2015, 11:10

isn't that a FAL?

FAL =/= XCR

Sputmilk · May 19th, 2015, 13:00

It's not a FAL actually, but it has FAL elements. All the guns from that game are uniquely designed probably to avoid licensing fees. The gun is basically an XCR with a slightly different body.

Danke · May 19th, 2015, 16:01

The point is that that's a not a MP5 grip.

The nearest you'll find is a SAW grip.

You would have been miles closer if you started out with a FNC or AK-5.

Wilkie · May 19th, 2015, 16:05

Reminds me more of an FNC

I don't see the similarities between this weapons and the XCR. Why are you butchering an XCR for something like this? Especially when the similarities will not be apparent to those around you

Sputmilk · May 19th, 2015, 18:25

If I were to go with an FNC, is it possible to find longer hand grips?

EDIT: and a longer barrel?

lurkingknight · May 19th, 2015, 18:43

answer to both will more than likely be a no.

Longer inner barrel yes, longer outer, probably not as modular as m4s.

The aftermarket for anything that isn't an M4 is slim. After M4 the most aftermarket support is probably in AK or g36 and even those can get very limited.

FALs are generally on the proprietary side of things in terms of their parts, since there have been a fair number of them from different manufacturers (real steel and airsoft) over the years.

They don't have swappable outer barrels in real steel, you generally buy the one in the length you want. The platform was never designed to be modular.

So in the case of the FAL, you get what you get with it. If you can't find parts for it, then they don't exist or you aren't googling hard enough to find out they don't exist.

There is no such thing as an mp5 style (or more accurately g3 styled) grip for the FAL because FAL is made by FN herstal in belguim while the MP5 and it's grandfather the g3 are by HK in germany. The grips on all the G3 decedents are integrated with the lower receiver on HK guns.

You're basically asking if you can put FORD parts on a CHEVROLET.

Sputmilk · May 19th, 2015, 18:53

I suppose everybody has been a noob at some point, right? I enjoyed the exposition dump though. Anyway my order was too late to be cancelled so I guess I'm stuck with the XCR. Still a nice gun from what I gather.

This just feels like a waste of a thread now. Or maybe it always did.

Wilkie · May 20th, 2015, 00:56

I wouldn't feel too bad. I love the looks of the XCR. I'd love a real one, too..

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 18th, 2015, 02:23	#1
Sputmilk Trader rating Join Date: May 2015 Location: Ontario	MP5 Style grip for XCR? I picked up a VFC x Socom Gear Robinson Armament XCR: https://triggerairsoft.com/shop/imag...nson%20xcr.jpg. I'm trying to make it look like a rifle from a videogame, as seen here: http://i.imgur.com/0QKuKTZ.jpg All I need to make it look just right is a bit of painting and stuff like that, but I'm having trouble finding something like that MP5 style grip. Does anybody have any suggestions? I suppose I could make my own, but I have no clue how to go about doing that.

May 19th, 2015, 11:10	#2
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	isn't that a FAL? FAL =/= XCR __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.

May 19th, 2015, 16:01	#4
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	The point is that that's a not a MP5 grip. The nearest you'll find is a SAW grip. You would have been miles closer if you started out with a FNC or AK-5. __________________ Airsoft, where nothing is hurt but feelings.

May 19th, 2015, 13:00	#3
Sputmilk Trader rating Join Date: May 2015 Location: Ontario	It's not a FAL actually, but it has FAL elements. All the guns from that game are uniquely designed probably to avoid licensing fees. The gun is basically an XCR with a slightly different body.

May 19th, 2015, 16:05	#5
Wilkie Trader rating Join Date: Apr 2013 Location: Brandon, Mb	Reminds me more of an FNC I don't see the similarities between this weapons and the XCR. Why are you butchering an XCR for something like this? Especially when the similarities will not be apparent to those around you

May 19th, 2015, 18:25	#6
Sputmilk Trader rating Join Date: May 2015 Location: Ontario	If I were to go with an FNC, is it possible to find longer hand grips? EDIT: and a longer barrel? Last edited by Sputmilk; May 20th, 2015 at 01:11..

May 19th, 2015, 18:43	#7
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	answer to both will more than likely be a no. Longer inner barrel yes, longer outer, probably not as modular as m4s. The aftermarket for anything that isn't an M4 is slim. After M4 the most aftermarket support is probably in AK or g36 and even those can get very limited. FALs are generally on the proprietary side of things in terms of their parts, since there have been a fair number of them from different manufacturers (real steel and airsoft) over the years. They don't have swappable outer barrels in real steel, you generally buy the one in the length you want. The platform was never designed to be modular. So in the case of the FAL, you get what you get with it. If you can't find parts for it, then they don't exist or you aren't googling hard enough to find out they don't exist. There is no such thing as an mp5 style (or more accurately g3 styled) grip for the FAL because FAL is made by FN herstal in belguim while the MP5 and it's grandfather the g3 are by HK in germany. The grips on all the G3 decedents are integrated with the lower receiver on HK guns. You're basically asking if you can put FORD parts on a CHEVROLET. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.

May 19th, 2015, 18:53	#8
Sputmilk Trader rating Join Date: May 2015 Location: Ontario	I suppose everybody has been a noob at some point, right? I enjoyed the exposition dump though. Anyway my order was too late to be cancelled so I guess I'm stuck with the XCR. Still a nice gun from what I gather. This just feels like a waste of a thread now. Or maybe it always did. Last edited by Sputmilk; May 19th, 2015 at 18:56..

May 20th, 2015, 00:56	#9
Wilkie Trader rating Join Date: Apr 2013 Location: Brandon, Mb	I wouldn't feel too bad. I love the looks of the XCR. I'd love a real one, too..

MP5 Style grip for XCR?

Accessories Discussion