Socom Gear 1911 MEU

Kilohotel · July 16th, 2014, 12:43

Hey guys,

I was curious if any of you had any background experience or feedback with the Socom Gear MEU. I've been our of airsoft for years and just recently started to gather info before getting back at it.

From what I've read, the Socom Gear MEU is a WE meu with markings, a rail and comes with a few goodies (Lanyard, suppressor), but what really interests me is wether it's any good. I've had no experience with Socom Gear and don't know if it should be considered a good quality gun or not.

If you have any experience or feedback, I'd gladly appreciate it if you would share.

-Mag compatibility?
-Parts availability/compatibility
-Stock performance (consistency, accuracy)
-Build quality (rattles? cheap parts that need replacing)

ts10z · July 16th, 2014, 13:03

Depends which Socom Gear MEU it is. There is one known as the Les Baer Socom Gear MEU or the Baer Custom MEU that are actually KJWorks. I have one, and really it is solid with just the typical 1911 problems, single stack mag so lower shot count till it runs out of propane, ambi safety being a little weak on the right side etc

jordan7831 · July 16th, 2014, 13:14

Some socom gear are rebranded WEs and others are KJWs. I like the KJW ones, and like ts10 said, they are quite solid guns.

You can tell if a gun is a WE if it has a small circle on the left hand side of the trigger guard where it reaches the top frame. KJWs do not have that small mark.

Danke · July 16th, 2014, 14:25

I've had a Soccom Gear Wilson Tactical 1911 for a few years now.

Always run well, with very good accuracy and gas consumption.

It has the nicest trigger pull of any of my pistols.

I am told the TM compatibility is not 100% and that mags may not swap either.

The finish is really marked up both on the controls and the slide/frame. It's been banged around and rubbed on other metal objects when holstered.

If you plan to upgrade start with TM. If you just want a 1911 that you can skirmish with and knock around and not shed tears over go with the Soccom Gear one.

Kilohotel · July 16th, 2014, 14:59

Thanks for the answers guys, learned a few things!

This is the gun I was looking to get:

http://www.milsig.ca/airsoft-guns-ga...ard-tan-p-3274
So according to Jordan, this should be a WE, and from what I read online it should be TM compatible for the most part.

What do you guys think of the WE/SG MEU in this case? Or should I go with a P226.

Being a part time airsoft/chairsofter, externals are as important to me as performance, but I'd like both and don't mind investing to get good performance. That being said, not sure I want to drop 400 on a TM gun then another 300 to make it full metal and 200$ to have it game-ready

jordan7831 · July 16th, 2014, 15:10

Yes that is a WE gun. You can also tell by the magazines too.

Wow thats quite expensive for that gun, hope you are looking around for better prices than that lol.

Kilohotel · July 16th, 2014, 15:16

Quote:

Originally Posted by jordan7831

Yes that is a WE gun. You can also tell by the magazines too.

Wow thats quite expensive for that gun, hope you are looking around for better prices than that lol.

Yeah, Milsig seems to be the most expensive retailer around,

I'd like to pay around 300$, 400$ is pushing it unless it has some awesome feature or performance.

Hectic · July 16th, 2014, 15:24

i know this isnt exactly the same gun, but its close, its solid, its KJW its cheap. I have one swapped the inner and hop rubber and its a beast
http://www.airsoftparts.ca/store2/in...oducts_id=2648

leth1337 · July 16th, 2014, 16:37

KJW co2 > WE propane/green gas IMO

Kilohotel · July 16th, 2014, 16:54

Quote:

Originally Posted by Hectic

i know this isnt exactly the same gun, but its close, its solid, its KJW its cheap. I have one swapped the inner and hop rubber and its a beast
http://www.airsoftparts.ca/store2/in...oducts_id=2648

Hey thanks Hectic,

From the pictures it's hard to tell, would you happen to have pictures of yours? Like I mentioned, being a chairsofter, looks and externals are "important" to me and I really like the looks of the MEU, i'd love to see more pictures of yours!

Also, what kind of results are you getting out of yours? With your upgraded barrel and bucking, what's the accuracy like?

ts10z · July 17th, 2014, 12:18

The one at airsoftparts is the same one I have. Externally its nice, but not freaking awesome. Comes with the MEU grips and smaller 1911 grips. Very similar to the picture you posted, but black instead of tan, chrome barrel instead of black, no lanyard, and no threaded barrel.

Internally it is close to TM compatable. Many parts work, a few don't. Those ones are easy to get from KJW. TM mags, both the 1911 old school style and the MEU style(which the SG one you pictured isn't using) work, as well its able to take CO2 mags for colder days or those days you want to hit a little harder. Most 1911s can not take CO2 mags

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 16th, 2014, 12:43	#1
Kilohotel Trader rating Join Date: Aug 2011	Socom Gear 1911 MEU Hey guys, I was curious if any of you had any background experience or feedback with the Socom Gear MEU. I've been our of airsoft for years and just recently started to gather info before getting back at it. From what I've read, the Socom Gear MEU is a WE meu with markings, a rail and comes with a few goodies (Lanyard, suppressor), but what really interests me is wether it's any good. I've had no experience with Socom Gear and don't know if it should be considered a good quality gun or not. If you have any experience or feedback, I'd gladly appreciate it if you would share. -Mag compatibility? -Parts availability/compatibility -Stock performance (consistency, accuracy) -Build quality (rattles? cheap parts that need replacing)

July 16th, 2014, 14:25	#4
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	I've had a Soccom Gear Wilson Tactical 1911 for a few years now. Always run well, with very good accuracy and gas consumption. It has the nicest trigger pull of any of my pistols. I am told the TM compatibility is not 100% and that mags may not swap either. The finish is really marked up both on the controls and the slide/frame. It's been banged around and rubbed on other metal objects when holstered. If you plan to upgrade start with TM. If you just want a 1911 that you can skirmish with and knock around and not shed tears over go with the Soccom Gear one. __________________ Airsoft, where nothing is hurt but feelings.

July 16th, 2014, 16:37	#9
leth1337 Trader rating Join Date: Apr 2006 Location: York Region, Ontario	KJW co2 > WE propane/green gas IMO __________________ WHISKEY-13

July 16th, 2014, 13:03	#2
ts10z Trader rating Join Date: Jun 2009 Location: Edmonton, Alberta	Depends which Socom Gear MEU it is. There is one known as the Les Baer Socom Gear MEU or the Baer Custom MEU that are actually KJWorks. I have one, and really it is solid with just the typical 1911 problems, single stack mag so lower shot count till it runs out of propane, ambi safety being a little weak on the right side etc

July 16th, 2014, 14:59	#5
Kilohotel Trader rating Join Date: Aug 2011	Thanks for the answers guys, learned a few things! This is the gun I was looking to get: http://www.milsig.ca/airsoft-guns-ga...ard-tan-p-3274 So according to Jordan, this should be a WE, and from what I read online it should be TM compatible for the most part. What do you guys think of the WE/SG MEU in this case? Or should I go with a P226. Being a part time airsoft/chairsofter, externals are as important to me as performance, but I'd like both and don't mind investing to get good performance. That being said, not sure I want to drop 400 on a TM gun then another 300 to make it full metal and 200$ to have it game-ready

July 17th, 2014, 12:18	#11
ts10z Trader rating Join Date: Jun 2009 Location: Edmonton, Alberta	The one at airsoftparts is the same one I have. Externally its nice, but not freaking awesome. Comes with the MEU grips and smaller 1911 grips. Very similar to the picture you posted, but black instead of tan, chrome barrel instead of black, no lanyard, and no threaded barrel. Internally it is close to TM compatable. Many parts work, a few don't. Those ones are easy to get from KJW. TM mags, both the 1911 old school style and the MEU style(which the SG one you pictured isn't using) work, as well its able to take CO2 mags for colder days or those days you want to hit a little harder. Most 1911s can not take CO2 mags

Socom Gear 1911 MEU

Airsoft Guns Discussion