Marushin Mossberg M500 Questions

deadcell · August 27th, 2005, 00:52

I have a friend interested in purchasing a Marushin Mossberg M500 Tactical Cruiser I've seen only a few shotguns used and dont really know much about them but did my homework via google and found alot of information but not on this particular gun. I found a single decent review I know its 6mm has 3 barrels, is gas powered and has a loading tube blah blah. I did not find any information on upgradability or its construction in general is it made of metal and plastic? wood maybe? Does it have any common problems? If so how easy are they to fix? How well does propane work? Would it need to be upgraded to use it? etc. Ive searched the forums extensively as well finding little information and any I did probably confuzed me more. Anyways if any owner or previous owner of one of these guns could hit me up some info that ouwld be great thanks.

Jamesy

GMTII · August 27th, 2005, 01:03

From my experience with marushin guns, only use duster gas. Propain/green gas tend to blow the seals on the gas chambour. I'm not sure if there's a upgrade for the M500 to take propain, but if there is you should consider getting it. Because if you blow the seals on your gun it's self you will be having a very expensive paper weight sitting around collecting dust.

Erik

Trader rating · August 27th, 2005, 07:57

Angus makes an upgrade kit for it I belive.
Rebort on my team has the 8mm one and it runs off propane fine.

mujahadeen · August 27th, 2005, 09:22

THREE loading tubes ONE barrel.

Accuracy isn't that great, I'm leaving to go to a 24 hour game in an hour with nothing but a mossberg m500, so as for skrim capabilities, it's ok.

I've got a side folding stock and surefire foregrip on mine, run it on propane. I've got a small leak but is doesn't effect it at all.

CDN_Stalker · August 27th, 2005, 11:07

The overpressure vavle won't handle propane, it just spews it all out. I filled it with epoxy to block it, works fine except when the gun is out in the heat for a while, then it leaks and is useless. I was told to put better O-rings in it to better deal with the higher pressure, and that the M500 has about the strongest gas system out of all the Marushin guns, so a few simple upgrades can be done for propane.

I had Rebort's shotty at a game one day and the rest of the team saw me shoot it past 100ft, one BB veered up, the other two kept going straight. So it's a useable gun, but the player would have to become more skilled to use it against AEG users.

Sweet gun BTW.

xboy · September 6th, 2005, 05:32

Would you guys have any more information or contacts on how to upgrade the M500 to handle propane? I got my m500 awhile now and I notice when I put propane in, it just spits it back out. :-(

xboy · September 6th, 2005, 05:50

Oops nevermind... found a good source on the site after some searching :P

mujahadeen · September 6th, 2005, 14:42

where?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 27th, 2005, 00:52	#1
deadcell Trader rating Join Date: Jan 2004 Location: metchosin/victoria B.C	Marushin Mossberg M500 Questions I have a friend interested in purchasing a Marushin Mossberg M500 Tactical Cruiser I've seen only a few shotguns used and dont really know much about them but did my homework via google and found alot of information but not on this particular gun. I found a single decent review I know its 6mm has 3 barrels, is gas powered and has a loading tube blah blah. I did not find any information on upgradability or its construction in general is it made of metal and plastic? wood maybe? Does it have any common problems? If so how easy are they to fix? How well does propane work? Would it need to be upgraded to use it? etc. Ive searched the forums extensively as well finding little information and any I did probably confuzed me more. Anyways if any owner or previous owner of one of these guns could hit me up some info that ouwld be great thanks. Jamesy __________________ "pain is temporary glory is forever"

August 27th, 2005, 01:03	#2
GMTII WW2 Airsofter Trader rating Join Date: Jun 2004	From my experience with marushin guns, only use duster gas. Propain/green gas tend to blow the seals on the gas chambour. I'm not sure if there's a upgrade for the M500 to take propain, but if there is you should consider getting it. Because if you blow the seals on your gun it's self you will be having a very expensive paper weight sitting around collecting dust. Erik __________________ I can't measure my sig so I got this stupid tag line instead.

August 27th, 2005, 09:22	#4
mujahadeen Trader rating Join Date: Jun 2003 Location: P.E.I	THREE loading tubes ONE barrel. Accuracy isn't that great, I'm leaving to go to a 24 hour game in an hour with nothing but a mossberg m500, so as for skrim capabilities, it's ok. I've got a side folding stock and surefire foregrip on mine, run it on propane. I've got a small leak but is doesn't effect it at all. __________________ < ATLANTIC AGE REP > Buyer & Seller Ratings Curiously enough, if you take the sine of 666°, you get 0.80901699, which is one half of negative phi, or perhaps what one might call the "anti-phi" / It is opposite of balance and harmony ergo: chaos and disharmony.

August 27th, 2005, 07:57	#3
Droc Guest Trader rating	Angus makes an upgrade kit for it I belive. Rebort on my team has the 8mm one and it runs off propane fine.

August 27th, 2005, 11:07	#5
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	The overpressure vavle won't handle propane, it just spews it all out. I filled it with epoxy to block it, works fine except when the gun is out in the heat for a while, then it leaks and is useless. I was told to put better O-rings in it to better deal with the higher pressure, and that the M500 has about the strongest gas system out of all the Marushin guns, so a few simple upgrades can be done for propane. I had Rebort's shotty at a game one day and the rest of the team saw me shoot it past 100ft, one BB veered up, the other two kept going straight. So it's a useable gun, but the player would have to become more skilled to use it against AEG users. Sweet gun BTW. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

September 6th, 2005, 05:32	#6
xboy Trader rating Join Date: Aug 2003	Would you guys have any more information or contacts on how to upgrade the M500 to handle propane? I got my m500 awhile now and I notice when I put propane in, it just spits it back out. :-(

September 6th, 2005, 05:50	#7
xboy Trader rating Join Date: Aug 2003	Oops nevermind... found a good source on the site after some searching :P

September 6th, 2005, 14:42	#8
mujahadeen Trader rating Join Date: Jun 2003 Location: P.E.I	where? __________________ < ATLANTIC AGE REP > Buyer & Seller Ratings Curiously enough, if you take the sine of 666°, you get 0.80901699, which is one half of negative phi, or perhaps what one might call the "anti-phi" / It is opposite of balance and harmony ergo: chaos and disharmony.

Marushin Mossberg M500 Questions

Airsoft Guns Discussion